Davies Craig, EWP80 Combo, 12V 80LPM, Electric Water Pump & Controller Combo, Up to 2.0L, DC-8907
Buy now pay later,no extra cost!
Payments from $38.40 with
The EWP®80 greatly enhances engine cooling control while giving you added power and improved fuel economy. By removing the parasitic power losses of a belt-driven, mechanical water pump the EWP® can provide up to 10kW (13hp) of extra power and increased torque. Use for Engines up to 2.0L standard.
The included LCD Fan Digital Controller will manage both the EWP® and Thermatic® fan operation. The Digital Controller will vary the speed of the EWP® in response to the engine’s coolant temperature. Multiple temperature settings are provided on the Controller for either maximum power or fuel efficiency.
The Thermatic® Fan/s will be activated automatically once the engine coolant rises 3°C (5.4°F) above the targeted (set) temperature. The Digital Controller will automatically run on for three minutes (or to 10°C / 14°F below the set temperature) after engine shut down, eliminating ‘heat soak’ and extending engine life.
Technical Specifications - EWP80
- Operating voltage 3V DC to 15V DC
- Maximum current 7.5A @ 13V
- Flow rate (max) 80 L/min @ 13V DC
- Operating temp. -40° to 130°C (-40° to 266°F)
- Pump weight 900 grams (2.0 lb)
- Pump material Nylon 66, 30% glass-filled
- Burst pressure 350 kPa (50 psi)
- Seal Ceramic face seal
- Fits hose sizes 32mm to 51mm (1⅜” to 2”)
- Elbow Adaptor 35mm (Nylon) 1
- Straight Adaptor 35mm (Nylon) 1
Technical Specification - LCD Controller
- Voltage range 12V DC to 29V DC
- Display LCD size 64.6mm x 55.6mm
- Maximum current 12Amps
Warning alarm has High & low Temp., Above set temp., Sensor short circuit, Pump error, High & low voltage and Sensor open circuit.
Overrun/ shutdown -10°C (14°F) below set/target temperature or 3 minutes
Indicators Temperature, power, EWP, test, fan, high & low temp, voltage, above set temperature (with alarm)
