Toyota Chaser, Crown, Mark II, JZX


Radium 10AN Male Swivel Banjo Press-Fit Fitting - 1JZ/2JZ
Radium EngineeringRadium Engineering 10AN low profile swivel fittings simply press-in. No drilling or welding required.FEATURES-Stainless/Aluminum Constru...
View full details

Chase Bays Power Steering Pump Feed -10AN Adapter - Toyota 1JZ | 2JZ & BEAMS
Chase BaysThe Chase Bays Power Steering Adapter for 1JZ-GTE | 2JZ-GTE | 2JZ-GE (including VVTi) and 3S-GE BEAMS is not only the best way to convert your pump...
View full details

Chase Bays Oil Cooler Block Adapter Kit - Toyota 1JZ | 2JZ
Chase BaysThe Chase Bays Oil Cooler Delete Block Adapter was designed to remove the weak coolant assisted OE 1JZ | 2JZ oil cooler and replace it with a power...
View full details
Hardrace Front Upper Arm Ball Joint Toyota, Lexus, Altezza, Crown Majesta, GS, IS, MARK II/CHASER, GRL10 12-, XE10 99-05, JZS, UZ
HardraceHARDRACE front lower ball joint replace your old ball joint to give you a more accurate feel with the steering. Features: OEM direct replacement R...
View full details

Radium Fuel Rail Top Feed Conversion - Toyota 2JZ-GTE
Radium EngineeringThe fuel rail ports are tapped for 8AN ORB. 8AN ORB Adapter Fittings can be found HERE.8AN ORB Direct Mount Regulators can be found HERE.8AN ORB Fu...
View full details
Radium Fuel Rail Top Feed Conversion - Toyota 1JZ-GTE (Non VVT-i)
Radium EngineeringPorts And Fittings The fuel rail ports are tapped for 8AN ORB. 8AN ORB Adapter Fittings can be found HERE. 8AN ORB Direct Mount Regulators can be ...
View full details
Hardrace Rear Shock Bushing Toyota, Mark Ii/Chaser, JZX90/100
HardraceHarden rubber bushing made with high strength and anti-crack rubber material, solid steering response and driving suspension feel, resist side incl...
View full details
Hardrace Front Lower Control Arm Bushing Toyota, Lexus, Crown, Crown Majesta, GS, IS, MARK X/REIZ, GRL10 12-, GRX120 04-09, G
HardraceHarden rubber bushing made with high strength and anti-crack rubber material, solid steering response and driving suspension feel, resist side incl...
View full details

Chase Bays Clutch Line - RHD Nissan 240sx S13 / S14 with VQ35DE or 1JZ | 2JZ
Chase BaysFits RHD Vehicles This product is designed for those who want to eliminate engine bay clutter, improve engine bay aesthetics, improve pedal feel, a...
View full details

Radium Fuel Pump Adapter for OEM 2ZZ-GE Hangers
Radium EngineeringThe Radium Engineering anodized billet aluminum adapter allows -6AN hose and fittings to be used with the OEM Toyota/Lotus fuel pump housing outlet...
View full details

Koyo Radiator 48mm - Toyota Chaser, Cresta, Mark 2, JZX100, 1JZ-GTE -1996-01
KoyoHH Series 48mm Radiator CoreKoyorad’s new 48mm “HH” Series radiator core features an ultra high fin density to maximize heat transfer. Koyo designs...
View full details

Fluidampr Toyota 2JZ I-6 Steel Internally Balanced Damper
FluidamprFluidampr Engine Dampers are designed to control destructive vibrations which are transfered thru the crankshaft. Each time the air/fuel mixture i...
View full details

Hardrace Roll Center Adjuster Toyota, Lexus, Altezza, Crown, Crown Majesta, Is, Mark Ii/Chaser, XE10 99-05, JZS 17# 99-07, JZS, UZS
HardraceBy installing the HARDRACE Roll-Center Adjusters, it will correct the suspension geometry of a lowered car, putting the control arms back closer to...
View full details

Radium Fuel Rail - Toyota 2JZ-GE VVT & non VVT
Radium EngineeringThe Radium fuel rail for the 6-cylinder Toyota 2JZ-GE (Non-Turbo) engine is manufactured with a large 8AN ORB internal bore supporting all horsepow...
View full details

Chase Bays Clutch Line - Toyota Chaser / Mark II / Cresta
Chase BaysThe stock JZX90 and JZX100 clutch line leaves us a lot of room for improvement. It heat soaks, it is three pieces making four unnecessary connectio...
View full details

Hardrace Front Sway Bar Toyota, Lexus, Crown, Crown Majesta, GS, IS, XE20 06-13, GRS19 06-11, AWS 21# 12-, GRS 18#/20#/GW
HardraceSway Bar affects the handling and the car’s over steer and under steer. It ties the lower suspension links together across the front or back, will ...
View full details

Hardrace Rear Toe Control Arm Toyota, Lexus, Altezza, Aristo, Crown, Crown Majesta, GS, IS, SC, XE10 99-05, JZS160 98-05
HardraceToe arms allow for fine-tuned adjustments to the rear toe in/out setting of the vehicle. It helps to raise straight line stability and road control...
View full details
Brian Crower Toyota 2JZ/1JZ Single Spring/Steel Retainer Kit
Brian CrowerDesigned for high rpm, BC valve springs by PAC Racing are wound from only the highest grade, super clean, chrome silicone alloy and feature proprie...
View full details

Chase Bays Clutch Line - LHD Nissan S13 / S14 with VQ35DE or 1JZ | 2JZ
Chase BaysLHD Vehicles Only This product is designed for those who want to eliminate engine bay clutter, improve engine bay aesthetics, improve pedal feel, ...
View full details
Greddy Revolution RS Cat Back Exhaust - Toyota Altezza/Lexus IS300
GReddy ExhaustNote: Please contact us for ordering this part. Note: Not for 3SGE or 1G-FE Revolution RS Concept : Racing Sport line focuses on maximum performanc...
View full details

Hardrace Rear Toe Control Arm Toyota, Mark Ii/Chaser, JZx90/100
HardraceToe arms allow for fine-tuned adjustments to the rear toe in/out setting of the vehicle. It helps to raise straight line stability and road control...
View full details
Hardrace Hardened Transmission Mount Toyota, Lexus, Altezza, GS, IS, MARK II/CHASER, SC, SUPRA, JZS147 93-97, XE10 99-05,
HardraceHarden transmission mount made by hardness rubber create more strength than OE rubber mounts, reduce engine move significantly, and provide the max...
View full details
Hardrace Hard Tie Rod Toyota, Crown, Crown Majesta, Mark Ii/Chaser, Jzs 17# 99-07, JZS, UZS 17# 99-04, JZX90/100
HardraceHARD tie rod made of unique high density steel, the metal stud provides accurate, consistent, rotational movement resulting in excellent responsive...
View full details

Chase Bays Compact Upper Water Neck - Toyota 1JZ-GTE | 2JZ-GTE
Chase BaysA major unsolved problem for the Toyota 1JZ-GTE | 2JZ-GTE engines is the upper water neck. Especially in swaps. It's bulky, it's difficult to fabr...
View full details

Radium Fuel Rail - Toyota 1JZ-GTE (VVT-i)
Radium EngineeringThe fuel rail ports are tapped for 8AN ORB. 8AN ORB Adapter Fittings can be found HERE.8AN ORB Direct Mount Regulators can be found HERE.8AN ORB Fu...
View full details

Hardrace Reinforced Front Sway Bar Link 2Pcs/Set Toyota, Lexus, Crown, GS, SC, JZS147 93-97, JZS160 98-05, Z40 01-10, J
HardraceHARDRACE Stabilizer Link precision assembly production enables spheroid, self-lubricating plastic bearing and bracket has a tight joint, providing ...
View full details

Hardrace Rear Upper Camber Kit Toyota, Lexus, Altezza, Aristo, Crown, Crown Majesta, GS, IS, SC, XE10 99-05, JZS160 98-05
HardraceHARDRACE camber kit reduces tire wear and increase tire durable. Made with superior quality bushing, provide advanced stability and accurate respon...
View full details
Radium EGR Delete Kit, 2JZ-GTE
Radium EngineeringAn exhaust gas recirculation (EGR) system transfers hot exhaust gasses back through the intake manifold in order to lower nitrogen oxide ...
View full details

Hardrace Rear Sway Bar Toyota, Lexus, Aristo, Crown, Crown Majesta, GS, JZS160 98-05, JZS 17# 99-07, JZS, UZS 17# 99-04, JZS16 97
HardraceSway Bar affects the handling and the car’s over steer and under steer. It ties the lower suspension links together across the front or back, will ...
View full details

Hardrace Front Roll Center Adjuster Toyota, Lexus, Crown, Crown Majesta, GS, IS, MARK X/REIZ, GRX120 04-09, GRX13X 09-, XE
HardraceBy installing the HARDRACE Roll-Center Adjusters, it will correct the suspension geometry of a lowered car, putting the control arms back closer to...
View full details
Hardrace Front Upper Negative Arm Toyota, Lexus, Crown, Crown Majesta, Gs, Is, Mark X/Reiz, Grx120 04-09, Xe20 06-13, Gr
HardraceThe control arm made with hardened steel and compound with superior quality bushing. A good control arm can regulate the movement of wheels quickly...
View full details

Hardrace Rear Lower Arm Toyota, Lexus, Altezza, Aristo, Crown, Crown Majesta, GS, IS, MARK X/REIZ, SC, GRX120 04-09, XE10 99-2
HardraceHARDRACE camber kit reduces tire wear and increase tire durable. Made with superior quality bushing, provide advanced stability and accurate respon...
View full details
Hardrace Rear Knuckle Bushing Toyota, Lexus, Altezza, Aristo, Crown, Crown Majesta, GS, IS, SC, XE10 99-05, JZS160 98-05
HardraceHarden rubber bushing made with high strength and anti-crack rubber material, solid steering response and driving suspension feel, resist side incl...
View full details
Hardrace Rear Knuckle Bushing Toyota, Lexus, Altezza, Aristo, Crown, Crown Majesta, GS, IS, SC, XE10 99-05, JZS160 98-05
HardracePillow ball bushing provides excellent driver feedback, precise control and solid suspension feel. Inner bushing is made accurately with both high ...
View full details

Hardrace Rear Upper Camber Kit Toyota, Lexus, Crown, Crown Majesta, GS, IS, Mark X/REIZ, GRX120 04-09, GRX13X 09-, XE20 20
HardraceHARDRACE camber kit reduces tire wear and increase tire durable. Made with superior quality bushing, provide advanced stability and accurate respon...
View full details

Hardrace Rear Toe Control Arm Toyota, Lexus, Altezza, Aristo, Crown, Crown Majesta, GS, IS, SC, XE10 99-05, JZS160 98-05
HardraceToe arms allow for fine-tuned adjustments to the rear toe in/out setting of the vehicle. It helps to raise straight line stability and road control...
View full details

Chase Bays Power Steering Kit - Nissan S13 / S14 / S15 with 1JZ-GTE or 2JZ-GTE
Chase BaysThe all new redesigned Chase Bays Power Steering Kit for Nissan 240sx / Silvia S13, S14 or S15 is designed to eliminate common factory power steer...
View full details

Chase Bays High Pressure Power Steering Hose - BMW E46 w/ 1JZ-GTE | 2JZ-GTE
Chase BaysLHD Vehicles Only The Chase Bays High Pressure Power Steering Hose is designed to eliminate the common OEM pressure hose leaks with improved aesthe...
View full details
Cusco Front Sway Bar - Altezza, JZX, Mark II, Chaser
CuscoCusco Front Sway Bar for Altezza, JZX, Mark II, Chaser - 30mm The Cusco Front Sway Bar will dramatically reduce body roll since its stiffness is gr...
View full details

Injector Dynamics ID1050X Injectors 11mm (Blue) Adaptor Tops Denso Lower Cushions (Set of 6) Toyota Supra NA (93-98) 2JZ-GE
Injector DynamicsThe ID1050x is the evolution of the ID1000, and the latest addition to the X-Series. It is the most recent offering from the partnership of Injecto...
View full details
Hardrace Rear Shock Bushing Toyota, Mark Ii/Chaser, JZX90/100
HardraceHarden rubber bushing made with high strength and anti-crack rubber material, solid steering response and driving suspension feel, resist side incl...
View full details

Hardrace Rear Lower Arm Camber Toyota, Mark Ii/Chaser, JZX90/100
HardraceHARDRACE camber kit reduces tire wear and increase tire durable. Made with superior quality bushing, provide advanced stability and accurate respon...
View full details

Hardrace Rear Differential Mount Toyota, Lexus, Altezza, Gs, Is, Mark Ii/Chaser, Xe10 99-05, Xe20 06-13, Grs19 06-11
HardraceHARDENED rubber bushing equipped with high strength and anti-crack rubber material, solid steering response and driving suspension feel, resist sid...
View full details

Hardrace Front Lower Arm Bushing Toyota, Crown, Crown Majesta, Mark Ii/Chaser, JZS 17# 99-07, JZS, UZS 17# 99-04, JZX90/100
HardraceHarden rubber bushing made with high strength and anti-crack rubber material, solid steering response and driving suspension feel, resist side incl...
View full details
Hardrace Rear Lower Arm Bushing Toyota, Mark Ii/Chaser, JZX90/100
HardraceHarden rubber bushing made with high strength and anti-crack rubber material, solid steering response and driving suspension feel, resist side incl...
View full details
Hardrace Rear Lower Arm Bushing Toyota, Lexus, Altezza, Is, Mark Ii/Chaser, XE10 99-05, JZX90/100, SXE 10 98-05
HardraceHarden rubber bushing made with high strength and anti-crack rubber material, solid steering response and driving suspension feel, resist side incl...
View full details

Hardrace Max Angle Tie Rod Toyota, Lexus, Altezza, Crown, Crown Majesta, Is, Mark Ii/Chaser, XE10 99-05, JZS 17# 99-07, JZS, UZS 1
HardraceHARDRACE tie rod is made of unique high density steel, the metal stud provides accurate, consistent, rotational movement resulting in excellent res...
View full details

Hardrace Rear Traction Rod Bushing Toyota, Lexus, Altezza, Aristo, Crown Majesta, Gs, Is, Mark Ii/Chaser, Xe10 99-05, Jzs160 98-20
HardraceHARDENED rubber bushing made with high strength and anti-crack rubber material, solid steering response and driving suspension feel, resist side in...
View full details