AN Fittings & Hose

AEM O2 Sensor Bung Plug
AEMAEM offers several sensor and Plug & Pin connector kits for vehicles that require additional outputs and/or upgraded hardware over existing sen...
View full details
Aeromotive 1/4″-MNPT to AN-06 Elbow Fitting, 90 Degrees, Black
AeromotiveAdditional Information: Weight 0.056 lbs Dimensions 4.38 × 2.69 × 1.25 in

Aeromotive 1/4″-MNPT to AN-08 Elbow Fitting, 90-Deg, Black
AeromotiveAdditional Information: Weight 0.088 lbs Dimensions 4.38 × 2.69 × 1.25 in

Aeromotive AN-06 to AN-08 Black Hose End
AeromotiveAdditional Information: Weight 0.11 lbs Dimensions 5.5 × 3.63 × 1.25 in

Aeromotive AN-08 Female Union Swivel Fitting
AeromotiveAdditional Information: Weight 0.09 lbs Dimensions 4.38 × 2.69 × 1.25 in

Aeromotive AN-12 Bulkhead Fitting
AeromotiveAdditional Information: Weight 0.18 lbs Dimensions 5.63 × 2.88 × 2 in

Aeromotive Bulkhead AN-06 Fitting
AeromotiveAdditional Information: Weight 0.06 lbs Dimensions 5.63 × 2.88 × 2 in

Aeromotive Bulkhead AN-08 Fitting
AeromotiveAdditional Information: Weight 0.1 lbs Dimensions 5.63 × 2.88 × 2 in

Aeromotive Bulkhead AN-10 Fitting
AeromotiveAdditional Information: Weight 0.12 lbs Dimensions 5.63 × 2.88 × 2 in

Aeromotive Female AN-06 to Male AN-08 Flare Black Fitting
AeromotiveAdditional Information: Weight 0.06 lbs Dimensions 4.38 × 2.69 × 1.25 in

Aeromotive Fitting, AN – 16 ORB, AN -12 Flare
AeromotiveAdditional Information: Weight .08 lbs Dimensions 4.38 × 2.69 × 1.25 in

Aeromotive Fitting, AN-16 ORB, AN-08 Flare
AeromotiveAdditional Information: Weight .08 lbs Dimensions 4.38 × 2.369 × 1.25 in

Aeromotive Fitting, AN-16 ORB, AN-10 Flare
AeromotiveAdditional Information: Weight .09 lbs Dimensions 4.38 × 2.69 × 1.25 in

Aeromotive Fitting, AN-16 ORB, AN-16 Flare
AeromotiveAdditional Information: Weight .08 lbs Dimensions 4.38 × 2.69 × 1.25 in

Aeromotive Hose End, PTFE Line, Straight, 45° Swivel, 90° Swivel, 180° Swivel
AeromotiveAeromotive PTFE hose is the best overall solution on the market today for fuel delivery systems. The PTFE (Polytetrafluoroethylene) inner tube is ...
View full details
Aeromotive Olive, PTFE, Hose End
AeromotiveAeromotive PTFE hose is the best overall solution on the market today for fuel delivery systems. The PTFE (Polytetrafluoroethylene) inner tube is ...
View full details
Aeromotive Union Fitting, AN-06 to 1/8-NPT Port
AeromotiveUnion, ORB-06 male with 1/8-NPT Female Port Commonly used as a gauge adapter for an empty ORB-06 female port. Additional Information: Weight 0.0...
View full details
ATP Turbo -3 (#3) Oil Feed Line, Braided Steel Line With Female (Flare/JIC/AN) Swivel Ends 36 Inches Long
ATP Turbo-03 Oil Feed Line, Braided Steel Line With female (flare/JIC/AN) swivel ends (one straight and one 90 end), -3 size, 36 INCHES long.

ATP Turbo -3 (#3) Oil Feed Line, Braided Steel Line With Female (Flare/JIC/AN) Swivel Ends 48 Inches Long
ATP Turbo-03 Oil Feed Line, Braided Steel Line With female (flare/JIC/AN) swivel ends (one straight and one 90 end), -3 size, 48 INCHES long.

ATP Turbo -6AN to fuel pump Hose Barb Fittings - EVO 8/9
ATP TurboReplacement -6AN to Hose Barb fittings for EVO 8/9 fuel pump holder, product code ATP-VEVO-120.

ATP Turbo 1/4" NPT to 4AN Flare Male to Male 90 Degree Adapter
ATP Turbo1/4" NPT to 4AN Flare Male to Male 90 Degree Adapter.

ATP Turbo 1/4" Pushlock Barb Fitting to 1/4" Pushlock Barb
ATP TurboFitting, 1/4" (6mm) pushlock barb to 1/4" pushlock barb. Used to join two coolant or fuel lines (pushlock style or regular rubber/silicone hose).

ATP Turbo 1/4" Three Way Hose Tee (Stainless Steel)
ATP Turbo1/4 inch, 3 wayay barb hose tee ("T") in stainless steel material.

ATP Turbo 1/8" NPT Female to -4AN Flare Male Straight Adapter
ATP Turbo1/8" NPT Female to -4AN Flare Male Straight Adapter.

ATP Turbo 10mm (1.00 Pitch) to -4AN Flare Fitting
ATP TurboMetric 10mm (1.00 pitch) to -4 AN flare fitting. Common thread on Nissan uses this assembly. Sealing washer is included on metric side.

ATP Turbo 10mm (1.25 Pitch) to -4AN Flare Fitting
ATP TurboMetric 10mm (1.25 pitch) to -4 AN flare fitting. Common thread on Nissan uses this assembly. Sealing washer is included on metric side.

ATP Turbo 10mm (1.50 Pitch) to -4 AN Flare Fitting
ATP TurboMetric 10mm (1.50 pitch) to -4 AN flare fitting. Common thread on Nissan uses this assembly. Sealing washer is included on metric side.

ATP Turbo 12mm (1.25 Pitch) -6AN Flare Fitting
ATP Turbo12mm (1.25 Pitch) -6AN Flare Fitting. Sealing washer included on metric side.

ATP Turbo 12mm (1.25 Pitch) to -4 AN Flare Fitting
ATP TurboMetric 12mm (1.25 pitch) to -4 AN flare fitting. Common thread on Nissan uses this assembly. CNC Machined aluminum construction. Sealing washer is ...
View full details
ATP Turbo 12mm (1.5 Pitch) -6AN Flare Fitting
ATP Turbo12mm (1.5 Pitch) -6AN Flare Fitting. Sealing washer included on metric side

ATP Turbo 14" Low Profile -3 Oil Feed Line Kit for GT25R Through GT35R Turbos
ATP TurboLow profile oil inlet (oil feed) -3AN LINE Kit for GT25R through GT35R (or GTX28 through GTX35) series turbochargers. 14" line length with integrat...
View full details
ATP Turbo 14mm Banjo Fitting Set for Coolant Lines - 3/8" (10mm) Barb (Common Size)
ATP TurboBanjo fitting kit for coolant (water) ports on Garrett ball bearing GT25, GT28, GTX28, GTX29, GT30, GTX30, GT35 and GTX35 series turbochargers. Als...
View full details
ATP Turbo 18mm Banjo Fitting Kit for Coolant Connections on GT40R/GT42R
ATP TurboBanjo fitting kit for coolant connections on GT40R/GT42R turbochargers. Banjo fitting threaded female end is 3/8" NPT.Add-on option includes either...
View full details
ATP Turbo 18mm Banjo Fitting Kit, Banjo to -6 AN flare male, M18 x 1.5, Long Nose AN6
ATP Turbo18mm Banjo Fitting Kit, Banjo to -6 AN flare male, M18 x 1.5, Long Nose AN61 Unit Includes:QTY 1 - 18mm Banjo Fitting - 18mm to -6 AN MaleQTY 1 - 1...
View full details