Radium Universal Single Catch Can, 6AN 8AN 10AN Kits
Buy now pay later,no extra cost!
Payments from $57.95 with
CATCH CAN OVERVIEW
When properly designed, an oil catch can will prevent sludge buildup in the intake, intercooler, throttle body, etc. They effectively raise fuel octane and increase engine performance with cleaner inlet air. Also, excessive oil collection can be an indicator of a damaged engine. Furthermore, they lower hydrocarbon emissions.
NOTES:
1. Depending on the PCV system design, some engines may require multiple catch cans.
2. Catch cans are NOT designed to be used with aftermarket crankcase vacuum pumps.
RADIUM CATCH CAN FEATURES
These catch cans are used in Radium Engineering application-specific catch can kits. They are machined from solid 6061 aluminum. The 2 halves and all ports are O-ring sealed, thus safe for pressurized (forced induction) applications. The main inlet and outlet ports are 10AN ORB (7/8"-14) female threads. The integrated M8x1.25mm threaded dipstick (shown below) unscrews for a quick way to check oil level.
These catch cans feature advanced air/oil separation. As shown below, there is an integrated stainless steel baffle plate.
This is a secondary baffle that prevents contaminants from exiting the catch can. Additionally, there are 2 internal stainless steel air/oil separators. One on the inlet and one on the outlet. These are easily washable and can be reused.
RADIUM CATCH CAN SERVICING
These catch cans feature Radium Engineering's patent pending Fluid Lock® technology. If the catch can fills up and is not emptied, an internal valve closes and eliminates the contaminants from exiting the catch can and entering the engine. Furthermore, it maintains normal venting through the catch can prohibiting engine damage.
For draining, there are a couple options depending on the application. If there is space, the lower half of the body that holds all of the contaminants simply unscrews. However, if there is no room to remove the lower half of the catch can, there is a 4AN ORB (7/16"-20) female threaded drain port. A 4AN ORB plug (shown below) is provided.
For remote draining, consider this petcock drain kit HERE.
RADIUM CATCH CAN DIMENSIONS
-Capacity: 7 fluid ounces
-Height (without fittings): 4.9 inches
-Outside Diameter: 2.45 inches
20-1806-FL SINGLE CATCH CAN, 6AN KIT, FLUID LOCK
This catch can kit is perfect for custom applications. It is designed for engines that use 3/8" (10mm) lines for the crankcase ventilation system. It is recommended to measure the engine vent lines first prior to ordering.
INCLUDES
1x Oil Catch Can, Fluid Lock
2x 10AN ORB to 6AN Male Banjos
2x 10AN ORB to 6AN Male Fittings
2x 6AN PushLok, Straight Hose Ends
2x 6AN PushLok, 45 Degree Hose Ends
2x 6AN PushLok, 90 Degree Hose Ends
2x Spring Clamps For 3/8" Hose
1x Aluminum Mounting Bracket
3x Stainless M6x1mm Bolts
3x Flanged M6x1mm Nuts
1x Service Interval Decal
10ft PCV Hose, 3/8" ID
20-1808-FL SINGLE CATCH CAN, 8AN KIT, FLUID LOCK
This catch can kit is perfect for custom applications. It is designed for engines that use 1/2" (13mm) lines for the crankcase ventilation system. It is recommended to measure the engine vent lines first prior to ordering.
INCLUDES
1x Oil Catch Can, Fluid Lock
2x 10AN ORB to 8AN Male Banjos
2x 10AN ORB to 8AN Male Fittings
2x 8AN PushLok, Straight Hose Ends
2x 8AN PushLok, 45 Degree Hose Ends
2x 8AN PushLok, 90 Degree Hose Ends
2x Spring Clamps For 1/2" Hose
1x Aluminum Mounting Bracket
3x Stainless M6x1mm Bolts
3x Flanged M6x1mm Nuts
1x Service Interval Decal
10ft PCV Hose, 1/2" ID
20-1810-FL SINGLE CATCH CAN, 10AN KIT, FLUID LOCK
This catch can kit is perfect for custom applications. It is designed for engines that use 5/8" (16mm) lines for the crankcase ventilation system. It is recommended to measure the engine vent lines first prior to ordering.
INCLUDES
1x Oil Catch Can, Fluid Lock
2x 10AN ORB to 10AN Male Banjos
2x 10AN ORB to 10AN Male Fittings
2x 10AN PushLok, Straight Hose Ends
2x 10AN PushLok, 60 Degree Hose Ends
2x 10AN PushLok, 90 Degree Hose Ends
2x Spring Clamps For 5/8" Hose
1x Aluminum Mounting Bracket
3x Stainless M6x1mm Bolts
3x Flanged M6x1mm Nuts
1x Service Interval Decal
10ft PCV Hose, 5/8" ID
