Mishimoto Performance Intercooler Kit Fits Chevrolet Camaro 2.0T 2016+/Cadillac ATS 2.0T 2013-2019
Buy now pay later,no extra cost!
Payments from $322.92 with
It's time to give the intercooling system in your 2016+ Chevrolet Camaro 2.0T or 2013-2019 Cadillac ATS a complete overhaul with the Mishimoto Performance Intercooler Kit. Our bar-and-plate constructed core picks up the slack for the stock unit by offering increased heat rejection characteristics, as well as a boost in airflow. On top of the new construction, our design increases the internal core volume by 45%, and offers a whopping 239% gain in external fin surface area, making sure that the charged air running through your LTG is as chilled as possible.
Our kit also includes a set of our mandrel-bent intercooler piping featuring a range of 2.25-2.75” diameters equating in a 30% increase in volume and 10% better flow of the charged air. All together, our piping kit gits your LTG powered Camaro or ATS up to 11 additional horsepower and 9 ft-lbs of torque. We have also included a pre-welded NPT port on the cold side piping that not only allows for easy installation of your stock equipment, but also adding an aftermarket boost gauge or meth-injection is a breeze.
The Mishimoto Performance Intercooler Kit for your 2013-2019 ATS or 2016+ Camaro is available with your choice of polished or wrinkle black piping, and as always this kit is covered under the Mishimoto Lifetime Warranty.
Features:
- Direct fit for the 2016+ Chevrolet Camaro 2.0T and 2013-2019 Cadillac ATS 2.0T
- 2" thick intercooler design optimized for maximum airflow with minimal pressure drop
- 45% increase in internal core volume & 239% increase in external fin surface area
- 78% increase in core size
- Cast end tanks with internal air diverter provide optimal airflow through intercooler
- 30% greater internal volume than stock
- 10% increase in flow
- Utilizes stock quick-disconnect fittings for easy installation
- Pre-welded NPT port on cold-side pipe allows for quick install of aftermarket meth injection or boost gauge
- Piping available in polished and wrinkle black
- Mishimoto Lifetime Warranty
Purchase Includes:
- (1) Aluminum Intercooler
- (2) Aluminum Pipes w/ CNC-machined quick-disconnects
- (1) Aluminum Pipe w/ CNC-machined 2-bolt flange
- (2) Quick-Disconnect Spring Clips
- (1) 2.75" 90° Silicone Coupler
- (1) 2.25" to 2.5" Silicone Transition Coupler
- (1) 2.5" T-Bolt Clamp
- (1) 2.75" T-Bolt Clamp
- (2) 3" T-Bolt Clamps
- (3) Tree Clips
- Mishimoto Lifetime Warranty
Notes:
There is an O-ring inside of the stock intercooler pipe on the end that connects to the intercooler. This O-ring must be removed and installed into your Mishimoto intercooler pipe. Take note when removing it from the stock pipe as the O-ring must be installed in the correct direction. Please reference our installation video for additional information.
Vehicle Specifications:
| Make | Mishimoto |
| Engine Codes | LTG |
| Chassis Codes | Alpha |
| Fits | 2016+ Chevrolet Camaro 2.0T 2013-2019 Cadillac ATS 2.0T |
Product Specifications:
| Pipe Diameter | 2.25"/2.5"/2.75" |
| Core Thickness | 2" |
| Outlet | 2.40" |
| Inlet | 2.40" |
| Core Size | 21.65" x 17.15" x 2.09" |
| Max Rec HP | 450 |
