Fueltech - TURBOSMART ELECTRONIC STRAIGHTGATE ESG50 EXTERNAL WASTEGATE
Buy now pay later,no extra cost!
Payments from $172.35 with
SPECIFICATIONS
The new eWastegates are a direct fit upgrade to all 4th-generation Turbosmart wastegates and feature TurboSmart unique collar-locking system, variable motor cap and base, strap-type V-band clamps, liquid-cooling, 1/8″ NPT ports.
Control: With the introduction of the electronic motor to drive the eWastegate, a new level of control is now available to boost control, there is a wide range of tuning strategies that can be implemented to better control boost as well as engine protection. This allows the Engine to maintain much better control with the turbo boost strategies.
Adjustability: The 5th generation eWastegate range has been designed with maximum user-adjustability, without comprising performance. TurboSmart designed this unit with almost infinite possibilities of directions in which the motor assembly can be mounted with the engine bay. So, if you need the eWastegate mounted in the opposite orientation to stop fouling with parts within the engine bay, there is an orientation that is suitable for the eWastegate to operate in. This mixed without the need of having to remove and reassemble due to changes in base wastegate spring pressure the eWastegate has next level control adjustability of the position of the wastegate valve.
Upgrades and Servicing: Due to the modular construction, the new range is also upgradeable and completely serviceable by TurboSmart, as all components can be removed or upgraded. Components have been tested for over one million cycles so reliability will be rock-solid.
Flow and Thermal Performance: Our new range of wastegates out-flow all competitors thanks to our world-leading engineering and simulation abilities. Thermal performance has been improved drastically compared to competitors, and all wastegates feature liquid cooling ports for further thermal performance if required
FEATURES
- Class Leading, CFD & Bench Validated
- Flow Performance Nitronic 60 Valve Guide & High Temp 347 SS Body
- Liquid Cooled, Electronic Actuator
- Strap Type V-band clamps
- User Adjustable Actuator Position
- Onboard Analog 0-5V Wastegate Position Sensor
- Onboard Analog 0-5V Actuator Temperature Sensor
- Size 1/8NPT
GENERAL FEATURES
There are no springs, no hoses and no boost reference signal, nor any of the limitations associated with any of them. Gone are ‘Minimum’ boost levels associated with base spring pressure or the heat related issues with hoses. If your manifold priority is good enough, you can set your boost anywhere from zero up to ‘All of it’ – All from your laptop or ECU touchscreen display.
REQUIREMENTS:
HYPERGATE45:
- Inlet Pipe Suits 47.63mm/1.875” OD
- Outlet Pipe Suits 44.45mm/1.75” OD
- Water Port:
-
- Tube Min. ID 6mm / 0.236” (Recommended -4 AN Fitting)
- From the ECU:
-
- 2 spare yellow outputs
- 1 spare input (2 if temperature is desired)
POWERGATE60:
- Inlet Pipe Suits 63.5mm/2.50” OD
- Outlet Pipe Suits 63.5mm/2.50” OD
- Water Port:
-
- Tube Min. ID 6mm / 0.236” (Recommended -4 AN Fitting)
- From the ECU:
-
- 2 spare yellow outputs
- 1 spare input (2 if temperature is desired)
MANUALS:
HYPERGATE45
POWERGATE60
DIMENSIONS:
- Packaging: 6.75 x 8.5 x 5.25 inches(L x W x H)
WEIGHT:
- 6.75lb (package weight)
- 4.69lb (wastegate)
CONTENTS OF PACKAGING:
- Wastegate unit
- SS316 Valve seat
- Inlet V-Band
- Inlet SS304 weld flange
- Outlet V-Band
- Outlet SS304 weld flange
- Collar tool (master/slave)
- Sticker
- Instruction card
WARRANTY:
- Worldwide: 1 year - manufacturing issues
