V-Band Kits

Mild Steel Weld Flange, V-band- Machined mild steel, mates to standard 3.5" V-band flanges and use 3.5" standard V-band clamp to join two of these ...

Mild Steel Weld Flange, V-band- Machined mild steel, mates to standard 3.5" V-band flanges and use 3.5" standard V-band clamp to join two of these ...

Stainless Weld Flange, V-band- Machined stainless, mates to standard 3.5" V-band flanges and use 3.5" standard V-band clamp to join two of these fl...

Mild steel Weld Flange, V-band- Machined, mates to standard 4" V-band flanges and use 4" standard V-band clamp to join two of these flanges. Also m...

4 Inch V-Band flange (4.75 Inch Outer Diameter). Machined from 304 Stainless Steel. Designed for 4 Inch diameter pipes.Compatible with Garrett Turb...

Stainless Downpipe Weld Flange with protruded lip, V-band- Machined stainless, mates to SPECIAL Garrett GT 3" V-band flanged housing with recess fo...

304 Stainless steel weld flange. V-Band machined, for use with 2" tubing and has a 3" outer flange diameter. Uses standard V-band clamp to join two...

FLAT stainless steel 5" machined v-band weld flange. Mates to industry standard 5" (use 5" tube) v-band flanges and use 5" standard v-band clamp (a...

3 Inch V-Band flange (3.75 Inch Outer Diameter). Machined from 304 Stainless Steel. Designed for 3 Inch diameter pipes.Compatible with Garrett Turb...

3" steel weld v-band flange. Weld directly to T04 (T4) turbine housing with cast in groove to convert complete turbine discharge with a protruded l...

Flange, Tial 44mm / Tial MVR Wastegate Inlet Flange, 304L Stainless Steel

Flange, Tial 44mm / Tial MVR Wastegate Outlet Flange, 304L Stainless Steel

Flange, Tial 60mm wastegate, V60 Inlet (manifold side) 304L Stainless Steel.

Flange, Tial V-banded 38mm MVS (V38) Wastegate Inlet Flange, 304L Stainless Steel.

Flange, Tial V-banded 38mm MVS (V38) Wastegate Outlet Flange, 304L Stainless Steel.

Flat, 3"Stainless Weld Flange, V-band- Machined 304 stainless, 3.55" OD

Garrett GTX3584RS dual ball bearing turbocharger, including V-Band compressor outlet housing; and a T4 Divided Inlet, 3" V-band outlet, and 1.06 A/...

GARRETT Stainless V-band Clamp, Turbine inlet (manifold side) for GARRETT V-Band Housing on GT/GTX30 and GT/GTX35 series. Garrett P/N: 826466-0001C

GTW3476R T3 undivided .48 A/R turbine housing with a T31 (narrow) v-band exit (3.10" OD).Component SolutionsDouble stepped flange, 2.5" / T31 V-Ban...

Housing, Tial, V-band inlet and outlet, GT30/GTX30, 1.06A/R

Housing, Tial, V-band inlet and outlet, GT42/GTX42, 1.16A/R

Housing, Tial, V-band inlet and outlet, G42/GTX42, 1.02A/R

Housing, Tial, V-band inlet and outlet, GT42/GTX42, 1.30A/R

Housing, Tial, V-band , GT28/GTX28, .64 A/R

Marmon (Beveled V-Band style turbine outlet flange) (for 5" piping) for the Garrett T6 divided turbine housing for the Garrett GT42 and GT45 series...

Heavy duty stainless steel Marmon (non-V-Band) clamp for beveled (Marmon) style non-v-band turbine outlet flange of the Garrett T6 divided turbine ...

O-Ring between GT42, GT42R, and GT42RS Compressor Outlet V-Band Flanges. V-band Flanges and Clamp Set part #ATP-FLS-055

MILD Steel - V-band Flange Machined for 2.5" Tube, Use 2 of these with the 2.5" V-Band Clamp for nice exhaust joint without the need for gasket. CN...

STAINLESS Steel - V-band Flange Machined for 2.5" Tube, Use 2 of these with the 2.5" V-Band Clamp for nice exhaust joint without the need for gaske...

1.3" Spacer ring (male/female) for TiAL manifold v-band entry (GT28/GT30/GT35). Billet Machined from solid. Mild Steel.

Special V-band Clamp from ATP FSI/TSI Stock location kit (manifold to turbo connection)

Stainless 4" V-band FLANGE (DOWNPIPE SIDE) for T4 Flanged Turbine Housing on GT42/GTX42 GT45/GTX45

1 flange (with 78mm centering ring) and 1 clamp to mate to "GT style 3" v-band discharge on "GT" style turbine housing where the flange has a 3.55"...

Stainless DOWNPIPE SIDE Flange and Clamp set for GT40R, GT4088R, GT4094R, GTX4088R. Flat flange without protruding lip to go with the flange flange...

Stainless V-Band Flange for Turbine inlet (manifold side) on TiAL turbine housings. Intended for TiAL turbine housings compatible with Garrett GT55...

Stainless V-band Flange for turbine outlet (down-pipe side) on TiAL turbine housings. Intended for TiAL turbine housings compatible with Garrett GT...

Heavy Duty Stainless Steel V-Band Clamp and Stainless Steel Manifold flange set. The stainless steel V-Band flange is recommended for welding a tur...

Stainless Steel V-Band Clamp, 4.50" Max diameter, for Garrett Comp V-Band out, Large frame.

Stainless steel V-band flange, Mates to stock GT1446 turbo outlet. Uses stock v-band clamp. Grooved for 3" OD Tube.

Standard flange adapter size 3" V-Band flange (3.75" OD) to 4" pipe transition adapter. One piece compact design and machined from 304 Stainless St...

T4 turbine housing with divided or undivided entry; and machined 3" V-band or welded on 3" V-band outlet. Fits P-trim turbine wheel found on T04S,...

Tial Stainless V-band Clamp, Turbine inlet (manifold side) for Tial V-Band Housing on GT/GTX28, GT/GTX30 and GT/GTX35 series. Tial code VC300

TiAL Stainless steel V-band Clamp for turbine housing outlet (down-pipe side) flange. Compatible with TiAL turbine housings for Garrett GT55 series...

Tial Stainless V-band Clamp, Turbine (downpipe side) OUTLET for Tial V-Band Housing on GT/GTX42 and GT/GTX45

Tial Stainless V-band Clamp, Turbine (downpipe side) OUTLET for Tial V-Band Housing on GT/GTX28, GT/GTX30 and GT/GTX35 series. Tial code VC355

3" LIGHTWEIGHT TITANIUM V-Band turbine housing outlet flange (down-pipe side) for Garrett G Series Small/medium Frame Turbo Models (G25-550, G25-66...

The V-Band Adapter for the GT25/28High Flowing 3.00" V-Band discharge module is now available for the GT25R, GT28R, GT28RS, GT2871R, GT3071R-WG, GT...

V-Band Adapter Module, Smaller 3 bolt T3 2.5" to 3" V-Band. TIG weld and mild steel construction. Allows easy transition to industry standard 3" V-...