Mazda MS3 Gen 1

ATP 3 Inch Billet MAF Housing - MS3/6 (all Denso) MAF housing used to create custom intake setups, 3.0-inch outer diameter (2 and 7/8 inner diamete...

Blow off Valve adapter, to easily mount the Greddy Type S, Type RS, or Type R to Mazdaspeed 3 or6 stock location Top Mounted Intercooler. For atmo...

Blow off Valve adapter, to easily mount the HKS SSQ BOV to Mazdaspeed 3/6 stock location Top Mounted Intercooler. MPS Blow off valve adapter

The S1 is the easiest turbocharger swap you can do.  It’s a direct bolt in, capable of 40 lbs/min of air flow.  Rated to 340whp with supporting mod...

BNR S2 Turbo Upgrade – MS3/6 BNR S2 Turbo Upgrade - MS3/6 The S2 has the same inlet diameter as stock (2.25”).   Only things you will need to modif...

The most popular turbo upgrade for the Mazdaspeed/MPS platform hands down! The BNR S3 version 2 turbocharger has a 2.36” inlet and works with almos...

BNR S5 Turbo Upgrade – MS3/6   BNR S5 Turbo Upgrade - MS3/6 The BNR S5 is the highest HP, stock flanged turbocharger available for the speeds! The ...

The stock Manifold Absolute Pressure sensor (MAP) is only a 2.5 BAR. It tops out around 23-24psi and accuracy becomes decreased around 22-23psi. To...

Cobb 06-13 Mazda Mazdaspeed3 Turbo Blanket

COBB 07-09 MazdaSpeed3 Cat-Back Exhaust Replacement hardware Kit (Gasket and bolts)

The COBB Tuning Gen1 MAZDASPEED3 Cat-Back is constructed purely from 304 Stainless Steel. The system starts with a stock donut-style flange that mo...

An extensive amount of engineering time was poured into developing our GESi Catted 3" Downpipe to produce the best all around option on the mark...

To help reduce excessive exhaust movement that can lead to the occasional rattle or rubbing, we offer highly durable Urethane exhaust hangers which...

COBB High Flow Filters are designed to permit very high flow rates, minimize restriction, maximize filtration and provide a long life filter. It u...

The new FMIC for MAZDASPEED3 has been revised to give more clearance for the frame rails, bumper beam and oil lines allowing for easier installatio...

The Gen1 Mazdaspeed3 Airbox is designed to be used along with the Mazdaspeed3 SF Intake System. The Gen1 Mazdaspeed Airbox will protect the intake ...

The COBB Rear Motor Mount is the best way to minimize engine movement, improve traction, and reduce wheel hop without major impact to NVH. Typical ...

The C.A.R.B certified COBB Tuning SF Intake intake system utilizes several unique features in an effort to maintain optimal flow for performance w...