Turbos

Fitting commonly used on compressor housings that are already tapped with 1/8" NPT for boost pressure signal required in order to properly actuate ...

Fitting commonly used on compressor housings that are already tapped with 1/8" NPT for pressure signal. This fitting screws right in to provide a h...

Fitting, Straight 3/8" NPT male to -6 AN, Male to Male.

Custom metric fitting to use Subaru STI stock oil feed source. 12mm female flare to 4AN male. Allows -4 steel braided line to screw into.Applicatio...

Fitting, Swivel, -10 AN Flare, Male to Female, 45 Degree, Converts Straight -10 hose end to 45D while extending the line a bit. Very convenient.

Fitting, Swivel, -10 AN Flare, Male to Female, 90 Degree, Converts Straight -10 hose end to 90D while extending the line a bit. Very convenient.

Fitting, Swivel, -6 AN Flare, Male to Female, 45 Degree, Converts Straight -6 hose end to 45D.

Fitting, Swivel, -6 AN Flare, Male to Female, 90 Degree, Converts Straight -6 hose end to 90D.

BIG (high volume) oil drain flange for all Borg Warner large frame S400 SX SX-E, S500 SX SX-E Turbos. Includes a large -12AN male fitting for a "tr...

Flange, adapter, allows GT2554R, GT2560R, GT28RS, GT2871R turbo to mount to stock Cooper Turbo S exhaust manifold.

2.5 inch and mild steel 2 bolt flange (revision 2.0).4" Center to Center bolt spacing

ATP Turbo Flange Mild Steel Generic 2 Bolt 3"

Oil Feed adapter flange source block for the TSFI engine on all MK6/ MK7 VW 2.0T and Audi A3 2.0T with the o-ring style oil feed fitting at the eng...

Flange, Adapter Fitting, OIL FEED, B58 Engine, MK5 2020 Toyota Supra 3.0T Output is a -4 AN Male. Great for building a custom turbo setup!

5 bolt mild steel downpipe discharge flange for GT2252.

Flange, Discharge GT32 6 Bolt Discharge, 2.5" Opening, Downpipe side, Mild Steel. Works well on both internal(6 ears) and external wastegate(round)...

Flange, Discharge T3/GT 4 Bolt 2.5" Inner Diameter Opening, Downpipe side, Mild SteelUse 2.5" OD tubing in the groove or 3" OD tubing outside the g...

T3 discharge (downpipe)5 bolt stainless flange ("ford style" 5 bolt) for an external wastegate setup. 304 Stainless. 2.5" Opening.

Laser cut Flange, T4 discharge mild steel, 4 bolt round outline flange found on ON-CENER T04 turbos, 3" opening

Flange, downpipe outlet, 4 bolt, for GT1241 Turbo, mild steel

BIG (high volume) OIL DRAIN FLANGE for all Garrett Large Frame GT55 GTX55 Turbos. Includes a large -12AN male fitting for a "true" -12 size full fl...

BIG (high volume) oil drain flange for all Borg Warner large frame S400 SX SX-E, S500 SX SX-E Turbos. Includes a large 3/4" Hose Barb fitting for a...

BIG (high volume) OIL DRAIN FLANGE for all Garrett Large Frame GT55 GTX55 Turbos. Includes a "true" 3/4" Hose Barb for full flow out of the turbo.

Special oil drain flange combo with -12AN return fitting for Borg Warner Flange S400 SX SX-E S200 S300 S200-SXE

Special combo 45 degree tight turn elbow oil drain flange for the GT/GTX, GT25 thru GTX35. 5/8" hose barb.

Special combo 45 degree tight turn elbow oil drain flange for the T3/T4 GT/GTX40-45.

Special oil drain flange combo with -12AN return fitting for T3/T4, GT/GTX 40 thru 45.

Special oil drain flange, 1/4" (6mm) SPACER PLATE return fitting for GT/GTX 28/30/35.

FLANGE, COMPRSR, 3D ALUM, 2" OUTLET, MACHINED WITH 2BOLT PATTERN, has 1/8" NPT port for convenient pressure signal. 2.75" bolt center to bolt cente...

Flange, CNC Machined 304 STAINLESS Steel, 2 bolt, 3" opening.Has a recessed area to sit a 3" tube into and cradle and weld for smoother internal flow.

Flange, CNC Machined 304 STAINLESS Steel, 2 bolt, 3" opening, Machined flange fits, Evo 8 / 9 / X / HGC rear 2 bolt pattern.Has a recessed area to ...

Stainless Flange, Turbine (downpipe side) OUTLET for Tial V-Band IW/G (Internally Gated) Housing on GT30 and GT35 series. Flange OD 4" and Tube OD ...

Steel - V-band Flange Machined for 3" Tube, Use 2 of these with the 3" V-Band Clamp for nice exhaust joint without the need for gasket. Also popula...

Discharge Flange CNC mild steel machined for Stock turbo 3 bolt turbine outlet on 1.8T Audi A4/Passat engine. Has a recessed area for the 3" pipe ...

CNC machined turbine mild steel discharge flange for Garrett GT15 turbo. Designed with opening for 3" oval tube (ATP-FLS-060) sold separately.

Flange, turbine inlet, 3 bolt, for GT1241 Turbo, mild steel

Turbine Inlet Flange, Larger rectangular bolt pattern with 4.5" and 2.75" center to center bolt patterns. Bolt pattern is also found on larger full...

Product Description GT/GTX (30/50) combo flange/flitting, with 3/4" OD hose barb for SRT4 (and other engines with 3/4" hose barb which is larger th...

T3/T4 combo flange/fitting, with 3/4" OD hose barb for SRT4 (and many other engines with bigger than typical 5/8") drain (matches oil drain tubes o...

1 pair (2 pc set), Turbo manifold weld flanges, 304 stainless, for 2020 Toyota Supra 3.0T (B58 engine). These flanges will allow you to build your ...

Standard T3 5-bolt Ford bolt outlet pattern with built in wastegate port flapper and oval opening shape. Same flange used on the Ultimate Internal ...

Ford PowerStroke 6.0L Turbo kit. For 2003.Garrett Ball Bearing Turbo for 2003 Ford F-Series & Excursion Power Stroke DieselKEY FEATURES: Model...

Ford PowerStroke 6.0L Turbo kit. For 2004-2007.Garrett Ball Bearing Turbo for 2004-2007 Ford F-Series & Excursion Power Stroke DieselKEY FEATUR...

Garrett divided V-band inlet & outlet turbine housing in Ni-Resist material; for GT30 and GTX30 series turbochargers. The turbine housing is ....

Garrett divided V-band inlet & outlet turbine housing in Ni-Resist material; for GT30 and GTX30 series turbochargers. The turbine housing is ....

Garrett divided V-band inlet & outlet turbine housing in Ni-Resist material; for GT30 and GTX30 series turbochargers. The turbine housing is 1....

Garrett divided V-band inlet & outlet turbine housing in Ni-Resist material; for GT35 and GTX35 series turbochargers. The turbine housing is ....