Turbos

New CNC Machined weld flange for T3 turbine inlet WITH Tapped holes. 1/2" thick prevents warping with high heat. Bolt pattern: 3.375" x 1.75"Tapped...

Machined weld flange for T04 turbine inlet. 1/2" thick prevents warping with high heat. Bolt pattern: 3.250" x 2.750". The Flange has an inner diam...

This product has been replaced by P/N: ATP-VVW-255 which you can purchase outright and no core is required to be sent in from you. Mild turbo kit (...

Mustang GT (2005 and newer) Garrett. Turbo GT Tuner Twin Turbo Kit for the 4.6L V8 engine. 600 to 800 HP capable (depending on turbo choice).Kit co...

New Ball Bearing Garrett GTX-4202R Turbocharger (GTX-R Series) - NO TURBINE HOUSINGApplicable Garrett P/N's:800269-5002S451888-0044

T4 Divided Inlet and 4" V-band Outlet Turbine Housing Introducing the Garrett GTX4202R from the GTX-R series. The GTX4202R is a more efficient and...

Product Description: New Ball Bearing Garrett GTX-4294R Turbocharger (GTX-R Series) - NO TURBINE HOUSING Applicable Garrett Part Numbers: 800269-5...

PRODUCT SPECIFICATIONS: Compressor Wheel Inducer: 70.3mm Compressor Wheel Exducer: 94mm Compressor Wheel Trim: 56 Compressor Housing: 60 A/R Turbin...

The latest ball bearing GTX-R series of the GT45 range is here on time for the race season. This is an even more efficient and more potent version ...

New Drag Race GTX4202R with special 49 trimmed (71.8mm inducer and 102.3 mm exducer) with NO TURBINE HOUSING. This turbo is built meet class requir...

A 400+ HP capable GT3071R-WG for the Volvo C30 / MKII Focus ST225, NSL (Near Stock Location) Internally wastegated V-band Turbo and Manifold.The Ga...

GT2871R Bolt-on turbo kit for the 1995 to 2003 SAAB 900 and 9-3 Turbo models with 2.0T engine. Turbo kit uses stock exhaust manifold and comes with...

GT28RS Bolt-on turbo kit for the 1995 to 2003 SAAB 900 and 9-3 Turbo models with 2.0T engine. Turbo kit uses stock exhaust manifold and comes with ...

O-Ring (4.530 x 0.067) Garrett Part Number 403069-0060 APPLICABLE GARRETT PART NUMBER: 403069-0060

O-ring (seal), goes between CHRA and backplate Adapter, all GT25 through GTX35

PRODUCT DESCRIPTION:O-ring (Seal), goes between Backplate and Comp Housing, T04E Frame GT/GTX. Standard on GT3076R, GT3071R, GTX3071R, GTX3076R, an...

O-Ring for Bosch Fuel Injectors, Top or Bottom O-Ring

O-ring for inlet compressor adapter used in part number ATP-FLA-012

O-ring, seal, at mounting Flange, Tial BOV, models 50mm, Tial Q, Tial QR

OEM Nissan Silvia S15 SR20DET ball Bearing T28 Turbo, Nissan P/N: 14411-91F00. 310 HP capable. Excellent responding turbo for 4 cylinder applicatio...

All coolant and oil fittings that come with our Fiesta ST stock location kit.

Fitting allows regular 5/8" hose for oil drain line. 1/2" NPT Male to 5/8" Single Barb (equiv to -10). To be used with ATP-FLA-009 or ATP-FLA-010 d...

Oil return (oil drain) flange NOW with large 3/4" NPT thread port for maximum flow out of the turbo. Designed for large width drain flange models b...

Sold Individually Gasket, for Drain Flange, GT25R, GT28R, GT28RS, GT30R, GT35R, Also oil feed flange T3

LONG VERSION of the oil return (oil drain) flange with integrated -10 AN/JIC male flare. 2 inches overall length. One piece design for easy install...

Oil Drain (Return) Flange Kit, -10AN, Borg Warner EFR Series 6258 6758, 7163 ,7670, 8374, 9180, 7064

Oil Drain (Return) Flange Kit, 5/8"BARB, Borg Warner EFR Series 6258 6758, 7163 ,7670, 8374, 9180, 7064.

Oil return (oil drain) flange with integrated -10 AN/JIC male flare. One piece design for easy installation. Made from billet T6061 aircraft alumin...

Oil return (oil drain) flange with integrated 5/8" slip-on barb fitting (same inner diameter as -10 AN/JIC flare). Made from billet T6061 aircraft ...

V2.0 EVO X OIL DRAIN TUBE ASSEMBLY ATP / GARRETT GT/GTX EVO X KIT , OIL RETURN LINE / DRAIN TUBE, EVO 10

Oil drain tube. CNC aluminum with integrated flanged LONG straight tube (no angle) machined from billet aluminum. T3, T4, T3/T4, GT40R, GT42R

Oil drain tube. CNC machined aluminum with integrated flange T3/T4 - 5 degree tilt. Machined from billet aluminum. Easy to install.

Oil pan drain fitting for MKIV (and other) VW Audi engines that are originally normally aspirated. Allows engine to use the stock oil pan's oil dra...

Drain flange adapter kit allows original T3 or T4 flanged oil drain line to be used when switching to GT BB turbo. Flange, Gaskets and Bolts inclu...

GT25R, GT28R, GT30R, GT35R oil drain tube. CNC aluminum with integrated flange. Straight tube (no angle). Machined from billet aluminum. Easy to in...

Fiat 500 Abarth Oil Feed adapter, Stock location, Stock oil feed port, remove stock line , screw this fitting into the stock feed port and accept s...

0.065 inch restricted port oil feed flange with integrated -4 AN/JIC male flare. INSTALLATION COMPONENTS: (one unit) Oil inlet feed flange gasket ...

Oil feed flange with integrated -3 AN/JIC male flare. Low profile one piece design for easy installation. Intended for compatible turbochargers wit...

Oil feed flange with integrated -4 AN/JIC male flare. Low profile one piece design for easy installation. Intended for compatible turbochargers wit...

UNDRILLED VERSION of the oil feed flange with integrated -4 AN/JIC male flare. Low profile one piece design for easy installation. Intended for use...

-03 Oil Feed Line, Braided Steel Line With female (flare/JIC/AN) swivel ends (one straight and one 90 end), -3 size, 12 INCHES long.

-03 Oil Feed Line, Braided Steel Line With female (flare/JIC/AN) swivel ends (one straight and one 90 end), -3 size, 18 INCHES long.

-03 Oil Feed Line, Braided Steel Line With female (flare/JIC/AN) swivel ends (one straight and one 90 end), -3 size, 24 INCHES long.

-3AN stainless steel (high pressure) braided line. Three feet in length and includes pre-crimped -3AN swivel hose ends (1x 90 degree fitting and 1x...

-3AN stainless steel (high pressure) braided line. Four feet in length and includes pre-crimped -3AN swivel hose ends (1x 90 degree fitting and 1x ...

-3AN stainless steel (high pressure) braided line. Five feet in length and includes pre-crimped -3AN swivel hose ends (1x 90 degree fitting and 1x ...

-03 Oil Feed Line, Braided Steel Line With female (flare/JIC/AN) swivel ends (one straight and one 90 end), -3 size, 16 INCHES long.

PRODUCT DESCRIPTION:4AN stainless steel (high pressure) braided line. Three feet in length and includes pre-crimped -4AN swivel hose ends (1x 90 d...