Turbo Accessories

-4AN stainless steel (high pressure) braided line. Five feet in length and includes pre-crimped -4AN swivel hose ends (1x 90 degree fitting and 1x ...

Replacement Kit From Tial: Turbine Housing Clamp and Bolt Kit - For Tial stainless V-band housings for GT28/GT30/GT35. 2 x Half Moon Clamps from T...

Steel braided oil feed line kit for Scion tC Turbo with fittings and tees. Specify Ball Bearing or Non-Ball Bearing, T25 or T3 flanged turbo being ...

Oil pan drain fitting for MKIV (and other) VW Audi engines that are originally normally aspirated. Allows engine to use the stock oil pan's oil dra...

ATP Turbo Straight Swivel Extender -6 AN/JIC Male/Female Straight Swivel Extender, -6 AN/JIC male/female. Used to extend line by 1" and adds swive...

Straight 3/8" NPT to -4 AN

BIG (high volume) oil drain flange for all Garrett large frame GT55/ GTX55 turbos. Has a huge 3/4" NPT female for screwing in a "true" 3/4" hose ba...

Fitting, 5/16" (8mm) pushlock barb to 5/16" pushlock barb. Used to join two coolant or fuel lines (pushlock style or regular rubber/silicone hose).

End Cap -6 AN/JIC, Caps off a -6 (#6) male Product Notes ** 1 End Cap sold per unit **

Steel braided Hose, -6 AN, for use as a coolant line or oil line, 18 inches long. -6AN Straight Hose End and -6AN Straight Hose End.PRODUCT CONTENT...

GT25R, GT28R, GT30R, GT35R oil drain tube. CNC aluminum with integrated flange. Straight tube (no angle). Machined from billet aluminum. Easy to in...

Fitting, 45 degree, 1/2" NPT male to 5/8" single slip on barb. Common to attach directly to oil drain flange for use with slip on 5/8" drain hose w...

Special oil drain flange combo with -12AN return fitting for T3/T4, GT/GTX 40 thru 45.

Fitting, 3/8" (10mm) pushlock barb to 3/8" pushlock barb. Used to join two coolant or fuel lines (pushlock style or regular rubber/silicone hose).

End Plug, -10 AN/JIC male plug to terminate and close off the end of a -10 AN/JIC return line.

Banjo Fitting 14mm (LONG ALUM VERSION) with -6 AN Male Flare. Overall length 3 inches.

V2.0 EVO X OIL DRAIN TUBE ASSEMBLY ATP / GARRETT GT/GTX EVO X KIT , OIL RETURN LINE / DRAIN TUBE, EVO 10

ATP Turbo Straight Swivel Extender, -10 AN/JIC Male/Female Straight Swivel Extender, -10 AN/JIC male/female. Used to extend line by 1" and adds sw...

Special oil drain flange, 1/4" (6mm) SPACER PLATE return fitting for GT/GTX 28/30/35.

BIG (high volume) OIL DRAIN FLANGE for all Garrett Large Frame GT55 GTX55 Turbos. Includes a "true" 3/4" Hose Barb for full flow out of the turbo.

End Cap -10 AN/JIC, Caps off a -10 (#10) male Product Notes ** 1 End Cap sold per unit **

Fitting, Swivel, -10 AN Flare, Male to Female, 45 Degree, Converts Straight -10 hose end to 45D while extending the line a bit. Very convenient.

Fitting, Metric 12mm (1.5 pitch) to -4 AN Flare. Sealing washer included on metric side. 12mm x 1.5.

Oil fitting kit, for testing oil pressure right at the oil inlet hole on GTBB turbos, after the .035" restrictor, good for trouble shooting oil lea...

Fitting, Metric 10mm (1.5 pitch) to -4 AN Flare. Sealing washer included on metric side.

Steel braided Hose (with a 14mm Banjo hose end and a -6AN straight hose end), -6 AN, for use as a coolant line or oil line, 18 inches long. 14mm Ba...

End plug, -6 AN/JIC male plug. Used to terminate and close off the end of a -6 AN/JIC coolant line

Fitting, 1/4" NPT to 6AN Flare, Male to Male, 90 deg Adapter.

Steel braided Hose (with a 90 Degree hose end and a straight hose end), -6 AN, for use as a coolant line or oil line, 12 inches long. -6AN 90 Degre...

Fitting, Swivel, -6 AN Flare, Male to Female, 45 Degree, Converts Straight -6 hose end to 45D.

Adapter fitting, feet assembly for bottom of Bosch 044 pump. Allows pump to be submerged and allows for proper pickup at bottom of tank. Avoids the...

Banjo Only - 14mm Aluminum For coolant connections on GT25R/GT28R/GT30R/GT35R Turbochargers. 14mm banjo to 1/4" NPT - Very flexible when used with ...

Low profile oil inlet (oil feed) -3AN LINE Kit for GT25R through GT35R (or GTX28 through GTX35) series turbochargers. 32" line length with integrat...

Steel braided Hose (with a 90 Degree hose end and a straight hose end), -6 AN, for use as a coolant line or oil line, 18 inches long. -6AN 90 Degre...

Adapter fitting ( AKA threaded bushing / sleeve ) 1/4" NPT male to 1/8" NPT female stepdown.Sometimes the fitting you want to use is only available...

45 Deg 1/8" NPT to -3 AN, Male to Male

Steel braided Hose (with a 14mm Banjo hose end and a -6AN straight hose end), -6 AN, for use as a coolant line or oil line, 24 inches long. 14mm Ba...

Steel braided Hose (with a 90 Degree hose end and a straight hose end), -6 AN, for use as a coolant line or oil line, 10 inches long. -6AN 90 Degre...

Steel braided Hose (with a 90 Degree hose end and a straight hose end), -6 AN, for use as a coolant line or oil line, 8 inches long. -6AN 90 Degree...

Tee Fitting, 3 way flare male size -4 AN/JIC, for teeing in an oil pressure gauge or temp gauge.

Steel braided Hose, -6 AN, for use as coolant line or oil line, 6 inches long. -6AN Straight Hose End and -6AN Straight Hose End.PRODUCT CONTENT: ...

-4AN 3 way tee fitting.Includes two male -4AN fitting ends and one female -4AN fitting end.

Steel braided Hose (with a 90 Degree hose end and a straight hose end), -6 AN, for use as a coolant line or oil line, 24 inches long. -6AN 90 Degre...

1/4" Barb to 1/8" NPT straight female fitting.

End Cap -4 AN/JIC, Caps off a -4 (#4) male. Product Notes ** 1 End Cap sold per unit **

End Cap, -3 AN/JIC, Caps off a -3 (#3) male

Fitting, 1/4" NPT to 6AN Flare, Male to Male, Straight Adapter.

Fitting, 1/4" NPT to 6AN Flare, Male to Male, 45 deg Adapter