Turbo Accessories

Special oil drain flange combo with -12AN return fitting for T3/T4, GT/GTX 40 thru 45.

Fitting, 3/8" (10mm) pushlock barb to 3/8" pushlock barb. Used to join two coolant or fuel lines (pushlock style or regular rubber/silicone hose).

End Plug, -10 AN/JIC male plug to terminate and close off the end of a -10 AN/JIC return line.

Banjo Fitting 14mm (LONG ALUM VERSION) with -6 AN Male Flare. Overall length 3 inches.

V2.0 EVO X OIL DRAIN TUBE ASSEMBLY ATP / GARRETT GT/GTX EVO X KIT , OIL RETURN LINE / DRAIN TUBE, EVO 10

ATP Turbo Straight Swivel Extender, -10 AN/JIC Male/Female Straight Swivel Extender, -10 AN/JIC male/female. Used to extend line by 1" and adds sw...

Special oil drain flange, 1/4" (6mm) SPACER PLATE return fitting for GT/GTX 28/30/35.

BIG (high volume) OIL DRAIN FLANGE for all Garrett Large Frame GT55 GTX55 Turbos. Includes a "true" 3/4" Hose Barb for full flow out of the turbo.

End Cap -10 AN/JIC, Caps off a -10 (#10) male Product Notes ** 1 End Cap sold per unit **

Fitting, Swivel, -10 AN Flare, Male to Female, 45 Degree, Converts Straight -10 hose end to 45D while extending the line a bit. Very convenient.

Fitting, Metric 12mm (1.5 pitch) to -4 AN Flare. Sealing washer included on metric side. 12mm x 1.5.

Oil fitting kit, for testing oil pressure right at the oil inlet hole on GTBB turbos, after the .035" restrictor, good for trouble shooting oil lea...

Fitting, Metric 10mm (1.5 pitch) to -4 AN Flare. Sealing washer included on metric side.

Steel braided Hose (with a 14mm Banjo hose end and a -6AN straight hose end), -6 AN, for use as a coolant line or oil line, 18 inches long. 14mm Ba...

End plug, -6 AN/JIC male plug. Used to terminate and close off the end of a -6 AN/JIC coolant line

Fitting, 1/4" NPT to 6AN Flare, Male to Male, 90 deg Adapter.

Steel braided Hose (with a 90 Degree hose end and a straight hose end), -6 AN, for use as a coolant line or oil line, 12 inches long. -6AN 90 Degre...

Fitting, Swivel, -6 AN Flare, Male to Female, 45 Degree, Converts Straight -6 hose end to 45D.

Adapter fitting, feet assembly for bottom of Bosch 044 pump. Allows pump to be submerged and allows for proper pickup at bottom of tank. Avoids the...

Banjo Only - 14mm Aluminum For coolant connections on GT25R/GT28R/GT30R/GT35R Turbochargers. 14mm banjo to 1/4" NPT - Very flexible when used with ...

Low profile oil inlet (oil feed) -3AN LINE Kit for GT25R through GT35R (or GTX28 through GTX35) series turbochargers. 32" line length with integrat...

Steel braided Hose (with a 90 Degree hose end and a straight hose end), -6 AN, for use as a coolant line or oil line, 18 inches long. -6AN 90 Degre...

Adapter fitting ( AKA threaded bushing / sleeve ) 1/4" NPT male to 1/8" NPT female stepdown.Sometimes the fitting you want to use is only available...

45 Deg 1/8" NPT to -3 AN, Male to Male

Steel braided Hose (with a 14mm Banjo hose end and a -6AN straight hose end), -6 AN, for use as a coolant line or oil line, 24 inches long. 14mm Ba...

Steel braided Hose (with a 90 Degree hose end and a straight hose end), -6 AN, for use as a coolant line or oil line, 10 inches long. -6AN 90 Degre...

Steel braided Hose (with a 90 Degree hose end and a straight hose end), -6 AN, for use as a coolant line or oil line, 8 inches long. -6AN 90 Degree...

Tee Fitting, 3 way flare male size -4 AN/JIC, for teeing in an oil pressure gauge or temp gauge.

Steel braided Hose, -6 AN, for use as coolant line or oil line, 6 inches long. -6AN Straight Hose End and -6AN Straight Hose End.PRODUCT CONTENT: ...

-4AN 3 way tee fitting.Includes two male -4AN fitting ends and one female -4AN fitting end.

Steel braided Hose (with a 90 Degree hose end and a straight hose end), -6 AN, for use as a coolant line or oil line, 24 inches long. -6AN 90 Degre...

1/4" Barb to 1/8" NPT straight female fitting.

End Cap -4 AN/JIC, Caps off a -4 (#4) male. Product Notes ** 1 End Cap sold per unit **

End Cap, -3 AN/JIC, Caps off a -3 (#3) male

Fitting, 1/4" NPT to 6AN Flare, Male to Male, Straight Adapter.

Fitting, 1/4" NPT to 6AN Flare, Male to Male, 45 deg Adapter

Banjo fitting kit including LONG aluminum banjo; for coolant (water) ports on Garrett ball bearing GT25, GT28, GTX28, GTX29, GT30, GTX30, GT35 and ...

Oil Feed Line -4 size - SS Braid 2 Ft. (24 inches) Stainless Steel Braided high temp line with AN/JIC swivel ends precrimped. High Pressure tight.

Rod Extension kit for internal wastegate actuator, (1)coupler, (2) nuts, (1) threaded rod 2" long.

Fitting, Male to Male, Metric 16mm (1.5pitch) x 6AN Flare, With sealing Washer. Provides easy way to connect to steel braided type lines with #6 AN...

Oil Feed Line -4 size - SS Braid 18 inches. Stainless Steel Braided high temp line with AN/JIC swivel ends precrimped. High Pressure tight.

Steel braided Hose, -6 AN, for use as coolant line or oil line, 24 inches long. -6AN Straight Hose End and -6AN Straight Hose End.PRODUCT CONTENT: ...

-4AN stainless steel (high pressure) braided line. Four feet in length and includes pre-crimped -4AN swivel hose ends (1x 90 degree fitting and 1x ...

STEEL Banjo fitting, 14mm hole (for 14mm bolt) with -6 AN male flare.

Quick connect fitting Male 5/16" size to -6 AN male. Allows ease of transition from -6 AN to the newer O-ringed squeeze and release type fitting fo...

(1) Banjo fitting, 10mm to 4AN flare, universal use.

Banjo fitting kit for coolant (water) ports on Garrett ball bearing GT25, GT28, GTX28, GTX29, GT30, GTX30, GT35 and GTX35 series turbochargers. Als...

90 degree 1/8" NPT to -4AN fitting; with male to male end fittings.NOTE: select the checkbox for alternate: 90 degree 1/8" NPT to -3AN fitting; wit...