Specials

The Radium Engineering retainer kit supports large aftermarket fuel lines under the MKIV (JZA80) Toyota Supra.The retainers are made from...

The Subaru Impreza 2.5i (EJ253) and JDM Ver8/9 (EJ207) STi intake manifolds are great solutions for eliminating the tumble generator val...

RADIUM DOES NOT OFFER A WARRANTY ON ANY FUEL PUMPS! FUEL PUMPS CAN BE RETURNED IN UNUSED CONDITION WITHIN 30 DAYS OF PURCHASE. SEE TERMS...

Radium Engineering catch cans feature large 10AN ORB ports, a 4AN ORB drain port, 2-step oil separation baffling, and an O-ring sealed d...

NPT (National Pipe Thread) fittings seal by the intentional interference created by the tapered threads meshing together. NOTES:1. The 1...

Dress up your engine bay with this high quality, billet aluminum VTEC solenoid cover.  These show quality VTEC solenoid covers are available in sma...

This comprehensive installation kit includes everything needed to install a Radium fuel surge tank with a single 39mm fuel pump in a Porsche (996) ...

These kits are for the Ford Mustang GT, EcoBoost, V6, Shelby GT350, and Shelby GT500. It is designed to replace the plastic coolant tank found at t...

The fuel rail ports are tapped for 8AN ORB. Appropriate fittings must be selected based on the specific application. Ample space around the fuel ra...

The Radium fuel pump hanger permits the use of one or two Walbro F90000274 high-flow fuel pumps and is compatible with the following vehicles:2012+...

The fuel rail ports are tapped for 8AN ORB. 8AN ORB Adapter Fittings can be found HERE.8AN ORB Direct Mount Regulators can be found HERE.8AN ORB Fu...

Compatible with 2015+ Subaru WRX (FA20DIT engine)This kit replaces the awkward OEM fuel feed tube going from the hard line on the firewall to the e...

The Radium Engineering universal fuel filter is a perfect match for any application needing high flow and industry-leading filtration.  Radium Engi...

The fuel rail ports are tapped for 8AN ORB. 8AN ORB Adapter Fittings can be found HERE.8AN ORB Direct Mount Regulators can be found HERE.8AN ORB Fu...

20-0231 Hose Separator Clamp, 5-WayAnodized black billet aluminum clamp used for securing -6AN hoses, wire harnesses, etc. Includes all stainless s...

This installation kit was specifically designed for the 2007+ Toyota Tundra with the 3UR-FE engine. There is no drilling or permanent modifications...

This Adjustable Pressure Switch offers a solution for triggering staged fuel pump(s) based on positive boost pressure. This normally open (N.O.) sw...

Ports And Fittings The fuel rail ports are tapped for 8AN ORB. 8AN ORB Adapter Fittings can be found HERE. 8AN ORB Direct Mount Regulators can be ...

This installation kit was specifically designed for the 1999-2007 GM trucks/SUVs with Vortec V8 gasoline engines. There is no drilling or permanent...

The fuel rail ports are tapped for 8AN ORB. 8AN ORB Adapter Fittings can be found HERE.8AN ORB Direct Mount Regulators can be found HERE.8AN ORB Fu...

Compatibility MITSUBISHI EVO 8 with 5-Speed and 6-Speed transmissions MITSUBISHI EVO 9 with 5-Speed and 6-Speed transmissions MITSUBISHI EVO 10 wi...

This installation kit was designed for most GM engines including LS1, LS2, LS3, LS6, LS7, L76, L99. This kit is not compatible with the LS4, LS9, a...

This kit is compatible with the 2015+ Subaru WRX and 2014+ Subaru Forester XT with the FA20F engine (left-hand drive models only). High-powered mod...

This dual catch can kit is compatible with the 2015+ Subaru WRX. However, it is not compatible with the 2018+ Sport Lineartronic (CVT) Transmission...

This Radium Engineering master cylinder brace is compatible with the left hand drive (LHD) 2015+ Subaru WRX, 2015+ Subaru WRX STi, and 2014+ Forest...

Price shown is for a set of two TGV delete spacers (right and left).Compatible with the 2015+ Subaru WRX (FA20 engine).This kit eliminates an emiss...

This kit is designed for use in the USDM 2008-2019 Subaru WRX STi (EJ257 only) and replaces the OEM fuel pressure regulator and damper as...

A high powered modified engine tends to generate excessive blow-by oil and gasses. In these cases, an ordinary small catch can may quickly fill wit...

This fuel rail features three 8AN ORB ports, two located at the ends and one in the middle. It also features one 1/8NPT port. 8AN ORB Adapter Fitti...

The fuel rail ports are tapped for 8AN ORB. 8AN ORB Adapter Fittings can be found HERE.8AN ORB Direct Mount Regulators can be found HERE.8AN ORB Fu...

This kit is designed to mount the Fuel Cell Surge Tank's lift pump to the bottom of a deep fuel cell. The standard FCST lift pump brackets are desi...

This aluminum CNC machined fitting allows flexibility when plumbing a coolant or fuel system using multiple pumps or fuel rails. It features two -6...

The Radium Engineering Jet Pump is an effective device for drawing fuel from one side of a fuel tank to the other. Fuel flowing through the venturi...

The opening and closing of fuel injectors creates pressure pulses in the fuel rail which can lead to unstable fuel pressure. In order to achieve a ...

This Idle Air Control Valve (IACV) Spacer is compatible with the SR20DET engine commonly found in the Nissan Silvia S14/S15 chassis. The OEM 2-bolt...

This kit can be used for fuel cells that use a 24-bolt (6x10) fill plate including FuelSafe, ATL, Jaz, Harmon, Pyrotect, etc. NOTE: Only compatible...

Multiple check valves are commonly used within a fuel cell collector box to protect against fuel slosh. The check valve functions similar to a trap...

The competition catch can extension is an upgrade specifically for customers who have the CCC short version (Radium 20-0072). It includes a O-ringe...

FCST DIRECT MOUNT FUEL FILLERSThe direct mount fuel fillers listed below are specific to the following FCSTs ONLY: 20-014X-XX, 20-049X-XX, 20-069X-...

Manufactured with a large internal bore, the fuel rail can support all necessary engine power requirements. They are CNC machined from 6...

An oil catch can is essential on a performance vehicle to protect the engine from elevated levels of crankcase blow-by accumulated from aggressive ...

20-0087The 20-0087 O-ring Service Kit is compatible with both new and old style "standard" (4" OD) fuel surge tanks (FST and FST-R). Includes: Sma...

The Radium Engineering fuel rails have been confirmed to be compatible with the VQ35DE, VQ35HR, and VQ37VHR engine. However, there are o...

These are the same machined aluminum injector seats used in Radium fuel rails for Mazda/Eunos Cosmo and RX-7 rotary engines. They are re...

This kit can be used to remotely drain any of the Radium Engineering catch cans without the need to unscrew the canister body. Anodized 4AN ORB Ba...