Silicone Hose & Clamps

TiAL Stainless steel V-band Clamp for turbine housing inlet (manifold side) flange. Compatible with TiAL turbine housings for Garrett GT55 series a...

Tial Stainless V-band Clamp, Turbine inlet (manifold side) for Tial V-Band Housing on GT/GTX42 and GT/GTX45 Series

Transition Connector of 2" to 2.25" inner diameter x 3.00" Length, Re-inforced 3-4 ply material.

Transition Connector of 2.00" to 2.50" inner diameter x 3.00" Length, Re-inforced 3-4 ply material.

Transition Straight, 2" To 2.75", 3" Length

Transition Connector of 2.00" to 3.00" inner diameter x 3.00" Length, Re-inforced 3-4 ply material.

Transition straight, 2.25" to 2.50", 3"

Transition Connector of 2.25" to 2.75" inner diameter x 3.00 Length, Re-inforced 3-4 ply material.

Transition Connector of 2.25" to 3.00" inner diameter x 3.00" Length, Re-inforced 3-4 ply material.

Transition Connector of 2.50" to 2.75" inner diameter x 3.00" Length, Re-inforced 3-4 ply material.

Transition Connector of 2.50" to 3.00 inner diameter x 3.00" Length, Re-inforced 3-4 ply material.

Transition Connector of 2.75" to 3" inner diameter x 3.00" Length, Re-inforced 3-4 ply material.

Transition Hose 3.00" to 3.25"

Transition Connector of 3" to 3.5" inner diameter x 3." Length, Re-inforced 3-4 ply material.

Transition Connector of 3" to 4" inner diameter x 3.00" Length, Re-inforced 3-4 ply material.

Transition Connector of 3.5" to 4" inner diameter x 3.00" Length, Heavy Duty Re-inforced 4 ply material

Transition Connector of 4" to 5" inner diameter x 3.00" Length, Heavy Duty Re-inforced 4 ply material.

Turbo silicone, multi-layer, wrapped, high temp, high pressure, 90 degree high temp silicone elbow. 3.5" inner diameter. Available in black or blue.

Black Silicone Straight Joiners Ranging in sizes from 2", 2.25", 2.5", 2.75", 3", 4". They are all straights We typically do not hold these in stoc...

BLOX Racing's silicone hose coupler replaces the OEM intercooler hose. BLOX Racing uses 4-layer silicone that is designed to withstand the high tem...

BLOX Racing's 3” turbo inlet hose is designed for high horsepower, big boost applications. BLOX Racing's turbo inlet hose replaces the OEM hose tha...

BLOX Racing's 3” turbo inlet hose is designed as a performance upgrade and replaces the OEM hose that connects the turbo and intake system. BLOX Ra...

Turbine Housing Clamp Kit for EFR with Aluminum BH Additional Information: Weight 3 lbs Dimensions 8 × 8 × 2 in Brand BorgWarner

BorgWarner EFR Turbine Outlet V-Band Clamp

Use where a good quality U-Bolt/ Saddle Clamp is required. T-304 Stainless steel will never rust. 5/16" U-Bolt w/standard nut, uses 9/16" socket....

BORLA® X-Pipe 60548 works perfectly between the factory catalytic converters and BORLA® Axle-Back systems on all C7 Corvettes including Stingray, G...

AccuSeal® clamp design provides 360 degrees of clamping force in a clean, easy to install, one bolt part. Use in applications where the clamping ...

Use where a good quality U-Bolt/ Saddle Clamp is required. T-304 Stainless steel will never rust. 5/16" U-Bolt w/standard nut, uses 9/16" socke...

Use where a good quality U-Bolt/ Saddle Clamp is required. T-304 Stainless steel will never rust. 5/16" U-Bolt w/standard nut, uses 9/16" socket...

Use where a good quality U-Bolt/ Saddle Clamp is required. T-304 Stainless steel will never rust. 5/16" U-Bolt w/standard nut, uses 9/16" socket...

Taken your throttle body coupler off one too many times? Has it seen better days? Why not add a little flair to your engine bay with the new COBB...

The COBB TMIC Coupler replaces the leak-prone factory hose and looks good while doing so! Over time the factory hoses become brittle and crack. T...

High quality, nylon reinforced silicone joiners. Perfect for intakes and intercooler piping. Features: Thickness of wall - 4.5 mm, 3ply reinforced...

High quality, nylon reinforced silicone joiners. Perfect for intakes and intercooler piping. Features: Wall Thickness -4.5 mm, 3ply reinforced Siz...

This performance clamping system is constructed entirely from 6061 aluminum and provide leak-free "modular" connections that are capable of withsta...

EPMAN Quick Release Clamp Performance HD Clamp System Assembly For 2.5",3.0",3.5"OD Throttle Body Turbo Intercooler Pipe  The HD Clamp Assembly pac...

The New EPMAN Performance HD Clamp Assembly is the next step in the evolution of our popular suite of modular, flexible connectors ideal for turbo...

EPMAN universal 90 degree silicone joiners Fitment: Thickness of wall 4 mm, 4 ply reinforced Size tolerance +/-0.5 mm Bursting Pressure 290 PSI W...

Perfect for engine bay dress up and running line for boost gauges, wastegates and other boost lines. Available in 3mm, 5mm and 10mm Features: Len...

No fancy explanation needed here - lots of clamp, easy to use - quality stainless construction!

High quality, nylon-reinforced silicone joiners. Perfect for intakes and intercooler piping. Available in 2.5", 3" and 4" Diameter Features: Wall...

High quality, nylon-reinforced silicone joiners. Perfect for intakes and intercooler piping. Features: Wall Thickness - 4.5 mm, 3ply reinforced Si...

The New EPMAN Performance HD Clamp Assembly is the next step in the evolution of our popular suite of modular, flexible connectors ideal for turbo...

ETS Replacement 3.0" Vband Clamp