Sensors

Sirius Unify: combines the Sirius Vision and Sirius Meter to form the most innovative, next generation metering system.  By unifying and overlaying...

*sold individually*HKS Air Temp Sensor M6 For VPC Everything you need to modify your VPC, including: Air Temperature Sensor for VPC Sensor harness...

Perfect for those building an intake from scratch and needing a bung for the air temp sensor to install into. Suits the sensor found on almost all...

A crucial piece to the k-swap puzzle and often not included in engine swaps or if piecing together a swap from a few different places.

Honda genuine crank sensor - K Series engine.

Honda genuine crank sensor for the K24 engine, don't settle for cheap branded knock off sensors! BUY HONDA GENUINE ONLY!

Honda genuine replacement radiator fan switch.  

H22a Euro R IACV (Idle Valve) Genuine honda so you know its good!

Probably the easiest thing to break on a Honda motor.  Whip it off, new one on. Done deal. Check Below For Corresponding Chassis and Engine. 30530-...

Genuine Honda Map sensor O-Ring

Thread: M12 x 1.5Hex: 19.0mmReplaces: Original White & Black Caps 37870-PJ7-003 37870-PK2-005

This useful fitting allows you to insert a factory B/D coolant temp sensor into the upper section of the K-Series coolant system. This is require...

This sensor is a must have for any k-swap. It reads the coolant's temperature and sends a signal to the gauge cluster in the EF/EG/EK/DC chassis. I...

This sensor is designed to switch the radiator fan on when the coolant gets above safe operating temperature. Easily inserted into any Hybrid Racin...

Every TRU-3.0 MAF housing has been machined from 6061-T6 to tolerances of +/-.001 and includes a factory style air straightener for the most accur...

A Motorsport specification throttle position sensor (TPS). AMP econoseal connector. Supplied with fitting screws, clamp and cover plate (vital for ...

K-Tuned 4 BAR MAP Sensors are designed to accurately read the increased manifold pressures on turbo or supercharger setups and will reliably suppor...

K-Tuned 4 BAR MAP Sensors are designed to accurately read the increased manifold pressures on turbo or supercharger setups and will reliably suppor...

K-Tuned 4 BAR MAP Sensors are designed to accurately read the increased manifold pressures on turbo or supercharger setups and will reliably suppor...

With the popularity of our b-series style throttle bodies we have gotten many requests to offer a sensor. Our b-series sensor is designed to work w...

This simple one wire sensor is needed on all K-swapped EF, EG, EK and DC2 chassis. It allows the coolant temperature reading to be properly disp...

K-Tuned Purge port plug is a simple and clean design to eliminate Purge ports on OEM and aftermarket throttle bodies. K-Tuned's billet plug is mad...

Removing the IACV from the throttlebody for cleaning used to be a real pain because it is held in place from the factory with tamper proof bolts.  ...

Application: K-Series and OBD2 D/B-Series Temp Sensors The intake temp sensor adapter is a great option for boosted cars where the rubber grommet j...

Applications: K-Series Engines OBD2 B-Series Temp Sensors Features: Made with 6061 aluminum Bung Thread Pitch - 3/8NPT Notes: This can ...

Application: All K-Series except new K24Z-Series Many K-Series cars come with a very brittle and easily broken knock sensor. If you have worked on...

Application Designed to work with K24 Knock Sensor Note: Knock Sensor not included This knock sensor plug is designed to work with the K24 knoc...

Applications: All 2002 - 2011 K Series Engines with BLACK K-Series Knock Sensors Note: Excludes K24Z - Series Does not fit - Newer Models 2...

Designing a custom intake for newer model Honda with electronic throttle body and MAF (Mass Air Flow Sensor) you will need one of these adapter to ...

K-Tuned MAP port plug is a simple and clean design to eliminate extra unused MAP ports found on K-series intake manifolds. When making changes to ...

Application:1/8 BSPT Thread. Notes: You must use Hondabond or Teflon tape on all threads on the adapter. The oil pressure sensor adapter is must h...

Applications: Universal MAP Sensor 1/8 NPT Inlet Standard B-Series connector (See Below for details) Notes: Available in 1.7 Bar (Stock) , 4 BA...

Applications: Universal MAP Sensor 1/8 NPT Inlet Standard K-Series connector (See Below for details) Notes: Available in 1.7 Bar (Stock) , 4 BA...

Applications: K-Tuned Race MAP Sensor Notes: This will only work with K-Tuned Stainless Steel Race Map Sensor This does NOT come with a MAP Sens...

If aren't using the OEM fan switch on your K-Tuned Swivel Neck T-stat, you will need this plug to block off the open port. Note: Swivel Neck Housi...

72mm and 80mm import style throttle bodies will use round TPS adapter. Old 90mm import style throttle bodies will use the square TPS adapter. New 9...

Applications:  K20A/A2 and Z1 throttle body or K20A3 throttle body only from the Honda EP3.  It also fits several aftermarket throttle bodies. ...

V-Tec plug is used to remove V-Tec Pressure Switch when running V-Tec killer cam setups. Application:  V-TEC killer cams

The Kraftwerks Performance O2 Sensor Bypass eliminates the factory narrow-band O2 sensor that is used for minor low speed closed-loop adjustments. ...

The Mishimoto water hose temperature sensor adapter allows you to place the water temperature sensor directly within the radiator hose. By placing ...

The Mishimoto water temperature sensor adapter allows you to place the water temperature sensor directly within the radiator hose. By placing the s...