Sensors

Used to freeze the stock MAP / MAF signal when it reaches a certain value, preventing the sensor from sending a value that is out of range for the ...

Hall Effect Cam Sync Sensor w/ LED.This sensor is used with our BBC 1" Raised Cam Sync mounting bracket.

Hall effect variant of the common 3/4-16" thread crank sensor for flying magnet crank triggers.DOES NOT work with toothed ferrous metal trigger whe...

Use this kit when building a custom harness while using injectors with Nippon Denso connectors.Kit Includes: Nippon Denso injector connector, (2) t...

Nylon hose for MAP Sensor 4mm ID for vacuum/pressure hose Available in 10ft or 20ft To use with any FuelTech ECU or FuelTech BoostController

Monitor crankcase vacuum inside your engine to make sure piston rings are sealing properly in the cylinders. Output: 0.5-4.5V Supply: 5V Range: -15...

Pressure Sensor/Pan Vacuum Sensor Plug Kit

This connector kit is used with the PRO550 & PRO600 V8 Complete Harness to utilize extra inputs or outputs.

This connector kit is used with the PRO550 & PRO600 V8 Complete Harness to utilize extra inputs or outputs.

This connector kit is used with the PRO550 & PRO600 V8 Complete Harness to utilize extra inputs or outputs.

This connector kit is used with the PRO600 V8 Complete Harness to utilize extra inputs.

This connector kit is used with the PROBIKE B Expansion Harness to utilize extra inputs or outputs.

TECHNICAL DESCRIPTION Output: 1-5V Supply: 12V Range: 0-10 bar Thread size: 1/8" NPT Connector Pinout: 1 - Signal 2 - Ground 3 - 12V

Typically used to monitor fuel, oil, and wastegate pressure.*Not compatible with PRO500/PRO600 or other complete FuelTech engine harnesses. Use PS-...

Typically used to monitor fuel, oil, and wastegate pressure. Note: Generic pictures used.  

FuelTech's billet remote pressure sensor mounting block is the perfect solution to mount your pressure sensors in one common place, Each port is in...

Thermocouple Exposed TipThe new FuelTech Thermocouple with Exposed Tip offers faster and more accurate temperature reading for exhaust gases.The ex...

Thermocouple Exposed TipThe new FuelTech Thermocouple with Exposed Tip offers faster and more accurate temperature reading for exhaust gases.The ex...

Thermocouple Exposed TipThe new FuelTech Thermocouple with Exposed Tip offers faster and more accurate temperature reading for exhaust gases.The ex...

Thermocouple Exposed TipThe new FuelTech Thermocouple with Exposed Tip offers faster and more accurate temperature reading for exhaust gases.The ex...

Thermocouple Exposed TipThe new FuelTech Thermocouple with Exposed Tip offers faster and more accurate temperature reading for exhaust gases.The ex...

Thermocouple Exposed TipThe new FuelTech Thermocouple with Exposed Tip offers faster and more accurate temperature reading for exhaust gases.The ex...

Fits most aftermarket throttle bodies that accept a "Ford" style throttle position sensor. It is Fitted with a 3 way GM metri-pack style connector....

*Color may vary based on stock availability.

Obtain vital data in order to determine whether the turbo is operating within its compressor map and at its highest efficiency. By inputting blade ...

Type K Miniature Thermocouple Connector.This thermocouple connectors are 2 pin flat mini size TC connectors designed to connect temperature sensor ...

Note: Requires Turbosmart Blackbox Electronic Wastegate Controller The new eWastegates are a direct fit upgrade to all 4th-generation Turbosmart wa...

FuelTech's billet vacuum distribution manifold is the perfect solution for running and organizing all of the vacuum lines on your race car. With 7 ...

The VR-HALL converter was designed to read an analog VR signal and transform it to a digital signal (Hall). Recommended when using VR speed sensors...

GM style water temperature sensor. Standard water/coolant sensor for all FuelTech ECUs.Thread size: 3/8" NPT

Standard Oxygen Sensor Bung M18 x 1.5 Thread Material: Stainless steel

GFB’s EGT (Exhaust Gas Temperature) Plugin kit is a direct plugin to our existing 3006 D-Force Electronic Boost Controller, adding critical exhaust...

Want to run E85 and pump gas, or anything in between? This sensor is a MUST HAVE! This Ethanol Content Sensor measures the ratio of ethanol to petr...

GReddy FR-S / BRZ Upper Water Temperature Adapter

GReddy Oil and Water Temp Sensor