Sensors

Popular 3 wire E85 Ethanol content sensor. Used in majority E85 / flex-fuel tuning applications; and ethanol content gauges.Wire harness sold separ...

Easy MAP Sensor adapter wire harness, converts your old GM 3/4 bar plug to go into AEM 5 BAR sensor

Electrical connector plug for GM IAT (Intake Air Temp) sensor. Standard GM 2 wire weatherproof plug used on many ECU systems including standalone E...

PRODUCT DESCRIPTION:Hobbs Switch.Positive boost pressure (PSI) activated switch with adjustable boost level trigger.Commonly used to automatically...

IAT (Intake Air Temp) sensor GM for misc tuning/turbo use. Standard GM 2 wire weatherproof plug used on many ECU systems including standalone ECM's...

Intercooler air temp mounting weld flange (aluminum) for 2013 Focus ST 2.0L. When replacing the stock intercooler, the sensor has to be placed onto...

MAF top for stock sensor mount for 2.0T FSI engine. Custom machined aluminum unit.

3 Bar map sensor for misc tuning use. Compatible with all engine management and tuning devices requiring the use of a "3 bar MAP sensor".Up to 29.7...

Map sensor flange to weld to aluminum charge pipe on Hyundai Coupe 2.0T (2010 to 2012 model years).APPLICATION NOTES:Compatible with Hyundai Genesi...

5 bar MAP sensor for misc tuning/turbo use. 2011 is the year for going over 30 PSI of boost. Make sure your ECU knows you're running that much boos...

O2 sensor, special Wideband, Bosch LSU Compatible. High precision tuning wideband for various tuning and logging devices. Uses the universal "flat"...

Rear 02 sensor mod (spacer), easy bolt-on kit installs inline with the rear 02 sensor on the 02 bung to prevent the CEL due to racepipes. Off road ...

Recessed fitting. Weld bung for O2 sensor. Mild Steel.

Coped / Radiused fitting. Weld bung for O2 sensor. STAINLESS Steel. Radius is perfect for 3" pipe diameter, but anything 2" to 4" works fine and mu...

Recessed fitting. Weld bung for O2 sensor. STAINLESS Steel

45 degree fitting. Stainless weld bung for O2 sensor.

Sensor, Pressure, 0-60 Psi, 1/8" Npt Male Features: Built in connector mates to Delphi Packard Metri-Pack 150 series connector #12065287 (not incl...

150 psi pressure sensor, solid state (1/8 NPTF) Features: Solid state pressure transducer. 1/8" NPT Male QUICK SPECS Type: Sensor Ra...

150 PSI Pressure sensor, 1/8 NPT thread. Fuel pressure expansion for Street and Race dash displays. Features: Solid state pressure transduce...

Sensor, Air Temperature Features: Sensor Body Material - Brass Thread size - 3/8" -18 NPTF Hex Size - 3/4" Built in connector mates to De...

0 to 3.5 bar/ 50 psi boost sensor (1/8 NPTF) Quick Specifications: Type Pressure Sensor Range 0-50 PSIA

500 psi pressure sensor, solid state (1/8 NPTF) Features: Solid state pressure transducer. 1/8" NPT Male QUICK SPECS Type: Sensor Ra...

75 psi pressure sensor, solid state (1/8 NPTF) Features: Solid state pressure transducer. 1/8" NPT Male QUICK SPECS Type: Sensor Ran...

Electric noise filter for Spek-Pro tachometers. Features: Provides over voltage protection circuit for automotive load dump Limits voltage s...

PRESSURE, SPEK-PRO, 0-150 PSI, 3/8"-24 Features: Includes 1/8" NPT sending unit and 3ft. of wiring (red, black, and white)

PRESSURE, SPEK-PRO, 0-30 PSI, 3/8"-24 Features: Includes 1/8" NPT sending unit and 3ft. of wiring (red, black, and white)

Replacement sensor for Spek-Pro 100/120/150 PSI pressure gauges, excluding Boost. 1/8" NPT male thread. Features: Solid state, data acquisit...

Replacement harness for Spek-Pro Voltmeter gauges. Features: Direct replacement harness for Spek Voltmeter gauges 12 pin connector to gauge ...

Replacement 1/8" NPT temperature sensor for Spek-Pro temperature gauges (oil, water, differential, and transmission). Features: Includes 1/8...

Replacement Type-K Thermocouple for all Spek-Pro pyrometers. Features: Includes stainless steel 1/8" NPT weld in fitting Includes double mal...

 Features: Compatible with AutoMeter Racing Digital Tire Pressure Gauges 24 inch air hose with 1/4 NPT fitting and 360 swivel w/ 45 degree air chu...

Gauge requires the 9110 control module. AutoMeter’s new state of the art AirDrive module provides a plug and play solution that wirelessly trans...

Gauge requires the 9110 control module. AutoMeter’s new state of the art AirDrive module provides a plug and play solution that wirelessly trans...

Gauge requires the 9110 control module. AutoMeter’s new state of the art AirDrive module provides a plug and play solution that wirelessly trans...

Gauge requires the 9110 control module. AutoMeter’s new state of the art AirDrive module provides a plug and play solution that wirelessly trans...

AutoMeter Drive Key, Speed Sensor, Replacement For 5292

Replacement sending unit for AutoMeter Marine Temperature gauges. Features: Sensor Body Material - Brass Thread size - 1/8 in. NPTF Includes 3...

Fluid Press. Sensor & Lead, Resistive, 150 PSIG / 10 Bar, 1/8" NPTF (M)

Sensor  Fluid Pressure Sensor 100PSI/7 BAR 1/8in NPTF (M) For 52mm Prof. Stepper Gauge.

Fluid Temp Sensor & Lead, 300 °F / 150 °C, M10 (M)

Fluid Temp. Sensor (1/8 NPTF) and harness for preconfigured Auto Meter Street and Race dash displays. Does not work with MFDL or LCD dash loggers.

Sensor, Oil Pressure, 0-80 PSI, 1/8" NPT Male, For Short Sweep Elec. Features: Sensor Body Materlal - Plated steel Thread size - 1/8 in. N...

These high quality switches from AutoMeter can be paired with Pro-Lite warning lamps to supplement your instrumentation and improve driver visibi...

These high quality switches from AutoMeter can be paired with Pro-Lite warning lamps to supplement your instrumentation and improve driver visibi...