Adrenalinr Resonators Twin Oval
Buy now pay later,no extra cost!
Payments from $70.90 with
Note: All Mufflers & Resonators are made to order. They cannot be returned.
Using 2 baffles these make a great inline resonator where space is limited and you would like to keep up the flow rate.
These stainless resonators are one of the most effective high performance mid mufflers available on the NZ market. We have sold so many of these resonators for race, drift, hill climb, street and rotary vehicles with astounding results in both performance and noise reduction.
Because of the large body size these resonators carry a lot of packing material, reducing noise levels further.
3 Stage Sound Absorption
These resonators are made in-house completely from T304 grade stainless steel here in NZ so quality is assured.
Fitted to these mufflers are our patented spiral louvre baffles which disrupt and disperse soundwaves before they reach the Db meter. This results in a lower Db reading all while increasing the flow through the spiral scavenging effect.
They utilize our 3 stage sound absorbtion methodology which consists of wrapping the baffle in exhaust grade stainless steel wool, ceramic matting and a layer of tightly woven needlemat fibreglass blanket.
- The stainless wool breaks up soundwaves and creates a barrier preventing the packing from breaking up and exiting the rear of the vehicle prolonging the life of each and every muffler.
- The ceramic matting absorbs noise and heat preventing the fibreglass turning back to glass.
- The fibreglass woven matting acts as the final noise insulator which results in quieter, deeper notes singing from the rear of your vehicle.
As we all know not every vehicle is the same so we offer a range of sizes to suit your application.
The longer the resonator means increased sound absorbtion for louder vehicles. If your chassis hits the ground and you don’t have the room then we can offer shorter resonators to fit what little gaps you may have.
If you have a custom build requirement just give us a call and we will work with you to find an agreed resolution.
Features:
- These units utilize our louvre baffle technology for increased noise reduction!
- Body size is Oval 8X5"
- Body Lengths are 350mm, 400mm, 450mm, 500mm
- Inlet sizes are 2" 2.25" 2.5" 3" (slip over fit)
- These utilize our 3 stage sound absorption technology made completely from stainless steel here in NZ!
- Prices from 350mm - $349, 400mm - $389, 450mm - $419, 500mm - $449
