Radium Engineering

20-0231 Hose Separator Clamp, 5-WayAnodized black billet aluminum clamp used for securing -6AN hoses, wire harnesses, etc. Includes all stainless s...

This gasket is compatible with the Idle Air Control Valve (IACV) found on the Nissan S14/S15 SR20DET and SR20VE engine. This CNC knife cut gasket i...

This Idle Air Control Valve (IACV) Spacer is compatible with the SR20DET engine commonly found in the Nissan Silvia S14/S15 chassis. The OEM 2-bolt...

These are the same machined aluminum injector seats used in Radium fuel rails for Mazda/Eunos Cosmo and RX-7 rotary engines. They are re...

These are the same machined aluminum injector seats used in Radium fuel rail kits. They are required when converting an OEM side feed injector to a...

These are the same machined aluminum injector seats used in Radium fuel rail kits for Subarus. They are required when converting an OEM side feed i...

These are the same machined aluminum injector seats used in Radium fuel rails. They are required when converting an aftermarket injector...

6AN, 8AN, 10AN Tee Adapter Fitting: -AN Male to -AN Female with 1/8 NPT Female threads. This is commonly used to install a sensor or a gauge inline...

These banjo fittings have the ability to rotate 360 degrees, even after installation. They are an excellent option for 90-degree connections and ar...

These machined 6061 aluminum adapter fittings will convert the OEM hard line flare fitting to a -6AN male connection for many Japanese vehicles. T...

This Radium Engineering master cylinder brace is compatible with the left hand drive (LHD) 2015+ Subaru WRX, 2015+ Subaru WRX STi, and 2014+ Forest...

This Radium Engineering master cylinder brace is compatible with the following left hand drive (LHD) vehicles:93-01 Subaru Impreza (ABS m...

COMPATIBILITY12-21 Toyota 86 (LHD ONLY)12-20 Subaru BRZ (LHD ONLY)12-16 Scion FR-S (LHD ONLY)INTRODUCTIONThe Radium Engineering brake master cylind...

For use with the Radium Engineeing Evo X fuel pump hanger. This small part plugs the hole for the fuel tank pressure sensor. In some parts of the w...

This kit is designed to make the removal of the 2005+ Lotus Elise rear clamshell quick and easy. The contents of this kit when combined with a few ...

RADIUM DOES NOT OFFER A WARRANTY ON ANY FUEL PUMPS! FUEL PUMPS CAN BE RETURNED IN UNUSED CONDITION WITHIN 30 DAYS OF PURCHASE. SEE TERMS AND CONDIT...

The Multi Port Regulator (MPR) is the ultimate solution for simple or complex high-flow fuel systems. It's unique port configuration makes it ideal...

The Multi-Port Regulator-Rotating Assembly (MPR-RA) is a great solution for both simple and complex high-flow fuel systems. Its unique port configu...

The following are billet aluminum clamps that replace the plastic retainers that secure the OEM hard lines underneath Nissan vehicles.20-0626 FUEL ...

NPT (National Pipe Thread) fittings seal by the intentional interference created by the tapered threads meshing together. NOTES:1. The 1...

The Radium Engineering PCV Baffle Plate mounts to the engine block and replaces the factory plastic PCV plate and valve. Compared to the OEM unit, ...

This specially machined aluminum fitting replaces the stock PCV valve on top of the Toyota 4U-GSE and Subaru FA20 engine blocks. These engines are ...

This kit is compatible with many vehicles including the the following: 2013+ Ford Focus ST EcoBoost2016+ Ford Focus RS EcoBoost2015+ For...

The Radium Engineering Port Injection Kit (PIK) installs between the intake manifold and the cylinder head and permits the use of port i...

20-0865 OVERVIEWVEHICLE COMPATIBILITY06-15 Audi R8 Type42 (all GEN-1 V10 trims)08-13 Lamborghini Gallardo LP550-2 (all trims)08-13 Lamborghini Gall...

PTFE is the ultimate hose material. It has outstanding resistance to chemicals including alcohol fuels such as methanol, ethanol, E85 and leaded fu...

Reuseable black aluminum Push-Lok hose ends. Can be used with Radium PCV/Fuel hose. 6AN is for 3/8" hose 8AN is for 1/2" hose 10AN is for 5/8" hos...

Dump cans are used in motorsports when quick refueling pit stops are essential. Depending on the configurations below, these dump cans can fill up ...

OVERVIEWThis kit permits all previous Radium Engineering adjustable fuel pressure regulators to be converted to an RA-Series FPR. This will add all...

This kit was designed to replace the factory Lotus Exige steel body shim spacers (shown below) with a permanently secured lightweight alternative. ...

What is a remote mounted fuel filler? A remote mounted fuel filler is NOT located directly on the fuel tank or fuel cell, but rather somewhere else...

What is a remote mounted fuel filler?A remote mounted fuel filler is NOT located directly on the fuel tank or fuel cell, but rather somewhere else ...

Stainless steel replacement orifice for many Radium Engineering products including MPR, DMR, FPR-D, FST-R, and a few fuel pump hangers. It has a sm...

These are replacement bladders for Radium RA-series fuel cells. Includes-Fuel Cell Bladder-Fuel Cell Foam-FiA Certification-SFI CertificationDoes N...

This is a replacement for the aluminum can that protects the internal fuel bladder. Compatible with Radium RA-series fuel cells.Each replacement fu...

These kits are specifically designed for the 00-05 Honda S2000, LHD (left hand drive) chassis. It is NOT compatible with any RHD (right hand drive)...

This installation kit was specifically designed for the 00-09 RHD and 06-09 LHD Honda S2000. It is not compatible with 00-05 Honda S2000 LHD models...

This fuel level sensor uses the standard SAE 5-bolt mounting pattern, extensively used with the Radium Fuel Cell Surge Tank.Full stainless steel se...

These adapter fittings are available in 5/16", 3/8", and 1/2" sizes. They push-on and secure to most modern USA, European, Japanese, etc. fuel inje...

The 5-ply silicone couplers are fiber reinforced for strength and come in different sizes. Ideal for air intake systems and turbo intercooler pipin...

This kit is specifically for the 2013+ Ford Focus ST. It is designed to replace the OEM sound symposer system which plumbs engine sounds...

This mount kit is designed to be used with the Radium Spare Tire Well Fuel Cell. It provides a simple fuel cell mounting solution in the...

This bracket kit provides a simple fuel cell mounting solution in the spare tire well area.The kit is compatible with the Radium RA-Series Spare Ti...

Flex fuel sensors measure ethanol content. They can be used in the FPR return line. But for improved accuracy and faster response times, the sensor...

The Radium transmission filter was designed specifically for the GR6 transmission found in the 2007+ Nissan R35 GT-R. Unlike the OEM filter, the el...

The Radium Engineering adjustable strut tower brace was designed to secure the front strut towers together laterally and increase chassis stiffness...

These fuel tubing kits are commonly used for plumbing in-tank submerged fuel pumps. The flexible convoluted tubing is manufactured from ...

Radium Engineering low profile swivel fittings simply press-in. No drilling or welding required. Nissan KA24DE shown below.Nissan S14/S15 SR20DET s...