Radium Engineering

The Radium Engineering FHST (fuel hanger surge tank) is the ultimate solution for fuel starvation issues. Fuel slosh is common when driven aggressi...

OVERVIEWThe Radium Engineering fuel hanger completely replaces the factory in-tank fuel pump unit in the R35 GT-R and permits up to three 39mm diam...

These 35 micron inlet filter baskets are compatible with many fuel injectors. They are NOT directly compatible with the popular Bosch EV14 injector...

This kit is designed to adapt a specific Denso fuel level sender (not included) that is found in many vehicles including: Mitsubishi EVO ...

20-0461 Fuel Level Switch, 1/8 NPT This 1/8" NPT fuel level switch should be installed inside the container, as shown below. When fuel l...

The Radium Engineering fuel line retaining kit supports up to 2 aftermarket fuel lines under the Nissan R35 GT-R.The retainers permit hos...

The Radium Engineering fuel line retaining kit supports large aftermarket fuel lines under the 2008-2014 Subaru Impreza, WRX, and STi.The...

The factory uses plastic retainers for securing the OEM feed and EVAP lines. These fuel lines run from the back to the front of the vehicle. This R...

This high-accuracy fuel pressure gauge is suitable for all fueling applications. It features an acrylic lens with a silicone filled dial that reads...

This product is not recommended for fuel pumps with more than 255 LPH (at 3 Bar) rated flow.This universal Radium Fuel Pressure Regulator (FPR) is ...

The Fuel Pressure Regulator Damper-Rotating Assembly (FPRD-RA) is the ultimate solution for consolidating critical fuel system components into a hi...

The Fuel Pressure Regulator-Damper (FPR-D) is the ultimate solution for consolidating critical fuel system components into a high-flow package. It ...

In some cases, mounting a fuel pressure gauge or pressure transducer directly to the fuel rail is not possible due to confined space around the fue...

The opening and closing of fuel injectors creates pressure pulses in the fuel rail which can lead to unstable fuel pressure. In order to achieve a ...

This OEM quality damper features a 3/8" NPT male thread with impregnated pipe thread paste.The opening and closing of the injectors creates pulses ...

This Radium Engineering kit completely replaces the OEM fuel pulse damper (below) found on the JZA80 Supra 2JZ-GTE engine. It also replac...

These fuel pump access covers are a direct replacement for the factory steel plates. They simply shield and protect the fuel pump module.Mazda FD3S...

The Radium Engineering anodized billet aluminum adapter allows -6AN hose and fittings to be used with the OEM Toyota/Lotus fuel pump housing outlet...

17-0037Specifications:Length: 8" (end to end)PTFE Wires: 14 AWGCompatible with the following fuel pumps:  Walbro GSS341 255LPH Walbro GSS342 255LP...

The Radium fuel pump hanger allows the use of 1 or 2 aftermarket high-flow fuel pumps and is compatible with the following models:  93-07 Subaru Im...

The Radium fuel pump hanger permits the use of one or two Walbro F90000274 high-flow fuel pumps and is compatible with the following vehicles:2012+...

20-0940 Fuel Hanger Toyota Chaser/Mark II/CrestaThe Radium Engineering Fuel Pump Hanger is a drop-in aftermarket fuel pump solution for supplying t...

The Radium Engineering fuel pump hanger permits the use of 1, 2, or 3 aftermarket pumps in the stock MK4 Toyota Supra (JZA80) fuel tank....

This Radium Engineering fuel hanger replaces the stock fuel pump assembly. No cutting or modifying of the vehicle's sheet metal or fuel tank is req...

LATE MODEL NISSAN FUEL PUMP HANGERThis product is compatible with the following vehicles:Nissan S14 Silvia (All models/trims/RHD/LHD)Nissan S14 200...

COMPATIBILITY2011+ Ford Mustang, All (S197/S550)2011+ Shelby GT/GTS/GT350 (S197/S550)2020+ Shelby GT500 (S550)13-14 Shelby GT500 (S197)OVERVIEWThe ...

VEHICLE COMPATIBILITY89-05 Mazda MX-5 Miata OVERVIEWThis fuel hanger completely replaces the factory in-tank fuel pump module and allows 1 or 2 af...

FUEL PUMP HANGERCOMPATIBILITY94-01 Acura Integra (All models/trims/RHD/LHD)92-00 Honda Civic (All models/trims/RHD/LHD)OVERVIEWThis Radium Engineer...

COMPATIBILITY08-14 Subaru Impreza (all)08-14 Subaru Forester (all)05-09 Subaru Legacy (all)05-09 Subaru Outback (all)15-21 Subaru STi14-18 Subaru F...

Both filters are compatible with gasoline and alternative fuels such as methanol, ethanol, E85, etc. 14-0143 FUEL PUMP INLET FILTER SOCK, 11MM ID T...

For those looking to increase the power output of their Porsche 911 Turbo (996), this plug and play (bolt-in) fuel pump replacement solution uses t...

20-0884 COMPATIBILITYE46 BMW M3E36 BMW M3 (OBDII Only)E36 BMW 3-Series (OBDII Only) 20-0894 COMPATIBILITYE46 BMW 323iE46 BMW 325iE46 BMW 328iE46 BM...

For those looking to increase the power output of their Porsche 911 Turbo (996), this plug and play (bolt-in) fuel pump replacement solution uses t...

This 6AN male adapter is used to integrate a high flow check valve on the outlet of many fuel pumps. The valve out flows the integrated c...

These adapters are used to convert the hose-barbed outlet of many fuel pumps to -6AN male. The two billet aluminium adapter halves are secured toge...

The fuel rail ports are tapped for 8AN ORB. Appropriate fittings must be selected based on the specific application. Ample space around the fuel ra...

Appropriate fittings must be selected based on the specific application. Ample space around the fuel rail port(s) is necessary for larger accessori...

This fuel rail features three 8AN ORB ports, two located at the ends and one in the middle. It also features one 1/8NPT port. 8AN ORB Adapter Fitti...

The fuel rail ports are tapped for 8AN ORB. 8AN ORB Adapter Fittings can be found HERE.8AN ORB Direct Mount Regulators can be found HERE.8AN ORB Fu...

PORTS AND FITTINGSThe fuel rail ports are tapped for 8AN ORB. Appropriate fittings must be selected based on the specific application. Ample space ...

PORTS AND FITTINGSThe fuel rail ports are tapped for 8AN ORB. Appropriate fittings must be selected based on the specific application. Ample space ...

The fuel rail ports are tapped for 8AN ORB. 8AN ORB Adapter Fittings can be found HERE.8AN ORB Direct Mount Regulators can be found HERE...

The Radium fuel rail for the 6-cylinder Toyota 2JZ-GE (Non-Turbo) engine is manufactured with a large 8AN ORB internal bore supporting all horsepow...

PORTS AND FITTINGSThe fuel rail ports are tapped for 8AN ORB. Appropriate fittings must be selected based on the specific application. Ample space ...

Ports And Fittings The end ports of this fuel rail are tapped for 8AN ORB. A center port for the factory fuel pulse damper is also included. 8AN O...

The Subaru Impreza 2.5i (EJ253) and JDM Ver8/9 (EJ207) STi intake manifolds are great solutions for eliminating the tumble generator val...

PORTS AND FITTINGS The fuel rail ports are tapped for 8AN ORB and 1/8 NPT. 8AN ORB Adapter Fittings can be found HERE.8AN ORB Direct Mount Regulato...

OVERVIEWCOMPATIBILITY Honda D15B Honda D15Z Honda D16A Honda D16B Honda D16Y Honda D16Z Honda SOHC ZC Honda DOHC ZC Fitment with aftermarket intake...