R Brand Collection

An oil catch can is essential on a performance vehicle to protect the engine from elevated levels of crankcase blow-by oil that accumulate from agg...

Radium Engineering Dynamic Safety Vent (DSV) valves feature advanced tank venting and roll-over protection for fuel cells and gas tanks. The Radium...

This kit is compatible with the EcoBoost powered Ford Raptor and 2015+ F-150 EcoBoost V6 (4WD and 2WD). The Radium Engineering catch ca...

This kit is compatible with all vehicles that use the 5.0L Ford Coyote modular engine including the direct injected 2018+ Mustang GT, 2011-2017 Mus...

2014+ Ford Fiesta ST Catch Can Kit Details:Radium Engineering catch cans feature large 10AN ORB ports, a 4AN ORB drain port, 2-step oil...

An oil catch can is essential on a performance vehicle to protect the engine from elevated levels of crankcase blow-by accumulated from ...

This comprehensive installation kit includes everything needed to install a Radium fuel surge tank (FST-R) in a 2013+ Focus ST and 2015+ Focus RS. ...

An oil catch can is essential on a performance vehicle to protect the engine from elevated levels of crankcase blow-by accumulated from...

The Radium Engineering FHST (fuel hanger surge tank) is the ultimate solution for fuel starvation issues. Fuel slosh is common when driven aggressi...

For those looking to increase the power output of their Porsche 911 Turbo (996), this plug and play (bolt-in) fuel pump replacement solution uses t...

This 5-bolt SAE pattern gasket is used for many fuel cell level senders. The 1/16" thick material is a premium quality variation of FKM Viton.

These are replacement bladders for Radium RA-series fuel cells. Includes-Fuel Cell Bladder-Fuel Cell Foam-FiA Certification-SFI CertificationDoes N...

This is a replacement for the aluminum can that protects the internal fuel bladder. Compatible with Radium RA-series fuel cells.Each replacement fu...

Mandated by the FiA, fuel cell foam is used both as an explosion suppressant as well as baffling. This reticulated foam is manufactured from polyur...

For a complete fuel cell package, run the fuel cell configurator HERE. A weld-in cage will ease fuel cell installation by offering a pre-made, safe...

The accessories listed below are specific to the popular Bosch 0 580 254 044 fuel pump. NOTE: The actual Bosch pump is not sold by Radium Engineeri...

The Radium Engineering retainer kit supports large aftermarket fuel lines under the MKIV (JZA80) Toyota Supra.The retainers are made from...

The Subaru Impreza 2.5i (EJ253) and JDM Ver8/9 (EJ207) STi intake manifolds are great solutions for eliminating the tumble generator val...

RADIUM DOES NOT OFFER A WARRANTY ON ANY FUEL PUMPS! FUEL PUMPS CAN BE RETURNED IN UNUSED CONDITION WITHIN 30 DAYS OF PURCHASE. SEE TERMS...

Radium Engineering catch cans feature large 10AN ORB ports, a 4AN ORB drain port, 2-step oil separation baffling, and an O-ring sealed d...

NPT (National Pipe Thread) fittings seal by the intentional interference created by the tapered threads meshing together. NOTES:1. The 1...

This comprehensive installation kit includes everything needed to install a Radium fuel surge tank with a single 39mm fuel pump in a Porsche (996) ...

The Radium fuel pump hanger permits the use of one or two Walbro F90000274 high-flow fuel pumps and is compatible with the following vehicles:2012+...

Compatible with 2015+ Subaru WRX (FA20DIT engine)This kit replaces the awkward OEM fuel feed tube going from the hard line on the firewall to the e...

20-0231 Hose Separator Clamp, 5-WayAnodized black billet aluminum clamp used for securing -6AN hoses, wire harnesses, etc. Includes all stainless s...

This installation kit was specifically designed for the 2007+ Toyota Tundra with the 3UR-FE engine. There is no drilling or permanent modifications...

This installation kit was specifically designed for the 1999-2007 GM trucks/SUVs with Vortec V8 gasoline engines. There is no drilling or permanent...

The fuel rail ports are tapped for 8AN ORB. 8AN ORB Adapter Fittings can be found HERE.8AN ORB Direct Mount Regulators can be found HERE.8AN ORB Fu...

This installation kit was designed for most GM engines including LS1, LS2, LS3, LS6, LS7, L76, L99. This kit is not compatible with the LS4, LS9, a...

This kit is compatible with the 2015+ Subaru WRX and 2014+ Subaru Forester XT with the FA20F engine (left-hand drive models only). High-powered mod...

This dual catch can kit is compatible with the 2015+ Subaru WRX. However, it is not compatible with the 2018+ Sport Lineartronic (CVT) Transmission...

This Radium Engineering master cylinder brace is compatible with the left hand drive (LHD) 2015+ Subaru WRX, 2015+ Subaru WRX STi, and 2014+ Forest...

Price shown is for a set of two TGV delete spacers (right and left).Compatible with the 2015+ Subaru WRX (FA20 engine).This kit eliminates an emiss...

This kit is designed for use in the USDM 2008-2019 Subaru WRX STi (EJ257 only) and replaces the OEM fuel pressure regulator and damper as...

This Idle Air Control Valve (IACV) Spacer is compatible with the SR20DET engine commonly found in the Nissan Silvia S14/S15 chassis. The OEM 2-bolt...

This kit can be used for fuel cells that use a 24-bolt (6x10) fill plate including FuelSafe, ATL, Jaz, Harmon, Pyrotect, etc. NOTE: Only compatible...

Multiple check valves are commonly used within a fuel cell collector box to protect against fuel slosh. The check valve functions similar to a trap...

The competition catch can extension is an upgrade specifically for customers who have the CCC short version (Radium 20-0072). It includes a O-ringe...

This comprehensive installation kit includes everything needed to install a Radium fuel surge tank with a single 39mm fuel pump in a Mitsubishi Lan...

Vehicle mounting bracket and 2pc clamp for installing a Radium Engineering fuel filter in the Mitsubishi EVO 8-9. Filter and lines are no...

These fuel rails are compatible with the following vehicles that use the General Motors LS9/LSA V8 engines: 2009-2013 Chevrolet Corvette...

These fuel rails are compatible with the following vehicles that use the General Motors LS7 V8 engines: 2006-2013 Chevrolet Corvette Z06...

This Radium Engineering master cylinder brace is compatible with the following left hand drive (LHD) vehicles:93-01 Subaru Impreza (ABS m...

This aluminum ECU bracket replaces the heavy MIG welded steel mount. It permits easier access to the RH side of the engine complimenting...

High-powered modified 4U-GSE and FA20A engines tend to generate excessive blow-by oil and gasses. In these cases, an ordinary small catch can may q...

This kit is designed to adapt a specific Denso fuel level sender (not included) that is found in many vehicles including: Mitsubishi EVO ...

The Radium fuel pump hanger allows the use of 1 or 2 aftermarket high-flow fuel pumps and is compatible with the following models:  93-07 Subaru Im...

A fuel surge tank (FST) is designed to prevent fuel starvation to the engine on vehicles with inadequate fuel tank baffling. The FST fue...