K Brand Collection

THE V2 TENSIONER DOES NOT USE A SPECIAL WRENCH! THE ORIGINAL AND STILL BEST ON THE MARKET! 100% CNC Machined Billet Aluminum and Stainless Steel 3...

Application: All K-Series except new K24Z-Series Many K-Series cars come with a very brittle and easily broken knock sensor. If you have worked on...

K-Tuned White 3M Vinyl Sticker . It measures approximate 13" x 1".  We've ran the numbers and 0.74hp/inch is what can be expected from the K-Tuned...

The B-Tuned Slave Cylinder is a great upgrade for those wanting to replace leaking, worn out, or just ugly OEM units. The B-Series slave cylinder i...

Applications:  88-05 Civic EF, EG, EK, EP. EM 90-01 Integra DA, DC2 02-06 RSX DC5 Note:* Works on Type S or Aftermarket or JDM Brackets (Throttle w...

Kaizenspeed Balance Shaft Eliminator Kit - H/F Series The KAIZENSPEED Balance Shaft Eliminator Kit includes all the necessary parts to cleanly elim...

The K-Tuned Slave Cylinder is a great upgrade for those wanting to replace leaking or worn out OEM units. Many new K-Series cars (05-06 RSX, 06+ Ci...

Application: 2004-08 CL7 and CL9. DOES NOT FIT DC5/EP3 etc RHD Vehicles only. Many of the newer k-series have a known issue with their factory clut...

Use this valve cover breather filter to keep warm, oil saturated crankcase vapours from re-entering your engine through the intake pipe.  Allowing ...

This listing is for (1) full connecting rod bearing set only. To view our complete engine bearing packages, click HERE! As race engines evolve, an...

The K24 Intake Manifold Adapter is a simple and easy way to install K20 style manifold on K24 heads. The recirculation fitting on K24s is typicall...

King Bearings Thrust Washers  As race engines have continued to evolve and become more powerful, the need for thrust washers that could withstand t...

As race engines evolve, and become more and more powerful, the need for engine bearings that can withstand the increasingly higher load capacity o...

It's rare to find any dress-up parts for the H22 engines.  It was a nice little surprise then, when we came across this piece from HS Tuned. Buy i...

Application:1/8 BSPT Thread. Notes: You must use Hondabond or Teflon tape on all threads on the adapter. The oil pressure sensor adapter is must h...

K-Tuned Upper Coolant Housing With Filler - K24/K20Z3 Applications:  K20Z3  K24 heads  K20A (RBC Head - CL7  Features:  -16OR (O-Ring) Outlet and...

K-Tuned reservoir socks are made from Terry Cotton and feature the signature K-Tuned logo embroidered on the front. Reservoir socks are designed t...

K-Tuned Billet Oil Cap is not just specific to K-Series engines but will fit all Honda motors.  The K-Tuned Billet Oil Cap combines simple yet cla...

As race engines evolve, and become more and more powerful, the need for engine bearings that can withstand the increasingly higher load capacity o...

As race engines evolve, and become more and more powerful, the need for engine bearings that can withstand the increasingly higher load capacity on...

K-Tuned AC & PS Eliminator Pulley Kit - K20/K24   Applications: Fits all K20 and K24 enginesNote:* This kit deletes both A/C and P/S, there is ...

This listing is for Crankshaft Main Bearings only. As race engines evolve, and become more and more powerful, the need for engine bearings that can...

Applications: All K-series engines The K-Tuned Idle Air Assist Delete Kit will help clean up the overall look of any K-series engine by removing ...

K-Tuned MAP port plug is a simple and clean design to eliminate extra unused MAP ports found on K-series intake manifolds. When making changes to ...

Applications:  RHD Vehicles ONLY - EG, DC2, EK, EP3, DC5, CL7, CL9, FD2, FN2 - B & K Series  Length: 1155mm    Fittings: 90 and 180 degree  O...

Applications:  K20 RBC K20Z3 K24 heads Feature: -16OR (O-Ring) Outlet and a -12OR (O-Ring) Filler InletHere is the K-Tuned Upper Coolant Housing...

Application: K-Series and OBD2 D/B-Series Temp Sensors The intake temp sensor adapter is a great option for boosted cars where the rubber grommet j...

Get all of King's great bearing design and R&D in an economical package for those wanting to freshen up their motor to OEM specs. Set Includes...

  Applications:  K20Z3 K20 RBC K24 heads  Note: * Excludes K24A1, K24Z and K24Y Series * Designed to provide greater clearance for sidewinder tu...

The K-Tuned Turndown Muffler is constructed entirely of 100% T304 stainless steel, including internals. The straight through design with a perforat...

Applications: EG, DC2, EK (EKK2 mounts only) Check out our K-Tuned pre-fit silicone heater hose kit. If you plan to keep your heater core, these 4...

On K-swapped cars without heater cores and top mounted shifters, most people seem to pass the shifter cables somewhere through the firewall. Somet...

Get all of King's great bearing design and R&D in an economical package for those wanting to freshen up their motor to OEM specs. King bearing...

This simple one wire sensor is needed on all K-swapped EF, EG, EK and DC2 chassis. It allows the coolant temperature reading to be properly disp...

K-Tuned Fuel Pressure Gauges are liquid filled to prevents failure due to the vibration and constant movement of the engine. The liquid-filled (sh...

The K-Tuned All-In-One Adjustable VSS Converter was designed to merge all of our original VSS units into one simple and easy to use programmable s...

As race engines evolve and become more and more powerful, the need for engine bearings that can withstand the increasingly higher load capacity ...

Our ground wire kit includes two 11" long ground wires. These are great upgrade for old corroded and worn grounds. You want to run one from transmi...

The K-Tuned 30 micron Inline fuel filter can be used universally. Can be disassembled for cleaning which is recommended every year depending on ho...

Get all of King's great bearing design and R&D in an economical package for those wanting to freshen up their motor to OEM specs. King bearing...

*Now includes both -16 & 32mm fittings We have revamped the design  of our popular Swivel Neck Thermostat Housing to use an OEM style thermost...

K-Tuned High Pressure Rad Caps were designed specifically to end the confusion over which cap is used with our upper coolant neck filler option...

The K-Tuned multi-port fuel rail is by far the best looking rail on the market. Using positive customer feedback and the demand to expand our fuel ...

Applications:  EG, EK, DC2 with CL7/9 Transmissions OEM Accord/TSX Shifter  K-Tuned Billet Accord/TSX Shifter Brought back from customer deman...

The Walk Blocker acts as an extra guide on the timing tensioner pulley to prevent the timing belt from walking off the cam gears. *Compatible with...