Intake

Applications: All cable driven K-series throttle bodies with IACV motor Instructions: CLICK HERE K-Tuned has now developed a very useful part ...

K-Tuned kits will allow you to build an intake system that will perfectly match your setup. They are available in both Short Ram or Cold Air config...

Applications:  88-05 Civic EF, EG, EK, EP. EM 90-01 Integra DA, DC2 02-06 RSX DC5 Note:* Works on Type S or Aftermarket or JDM Brackets (Throttle w...

Applications: 1988 - 2005 Honda Civic EF, EG, EK, EP. EM 1990 - 2001 Acura Integra DA, DC2 2002 - 2006 Acura RSX DC5 Features: Available in 3 ...

Finally a good intake system for your K-Series swapped car, this intake is designed to fit engines that are using the original intake manifold. Unl...

The K-Tuned Ram Air Intake is the best K-swap intake in the industry.   If you want maximum power output, look no further. This race-inspired, ag...

Application: Universal with 2.5", 3", or 3.5" piping Features: Offered 2.5", 3.0" and 3.5" diameters Notes: 5.25" overall height 6" filter...

Designing a custom intake for newer model Honda with electronic throttle body and MAF (Mass Air Flow Sensor) you will need one of these adapter to ...

K-Tuned MAP port plug is a simple and clean design to eliminate extra unused MAP ports found on K-series intake manifolds. When making changes to ...

Applications: 70mm Throttle bodies with an RSX/PRB bolt pattern Adapts to RBC / RSX Intake Manifold Features: Adapts the RBC/RRC manifold flange...

For our K-Tuned Intake Manifold project we partnered up with a long time friend and owner of Magnus Motorsports to design a performance intake mani...

Interchangeable inlets for K-Tuned Throttle Bodies. Easily swap out the standard barb fitting to a V-Band or Vanjen fitting in 3". NO MORE WELDING ...

Interchangeable inlets for K-Tuned Throttle Bodies. Easily swap out the standard barb fitting to a V-Band or Vanjen fitting in 3" or 3.5" NO MORE W...

Applications: NEW 2019 Style K-Tuned 90mm Throttle Bodies KTD-TB9-K10 KTD-TB9-B10 Interchangeable inlets for K-Tuned Throttle Bodies. Easily swa...

The K-Tuned velocity coupler is made from reinforced 4-ply silicone. This unique part completely removes the step commonly found at the throttle...

Big bore domestic throttle bodies have been making their way onto import engines for several years now and it is no secret that getting some of ...

Use this valve cover breather filter to keep warm, oil saturated crankcase vapours from re-entering your engine through the intake pipe.  Allowing ...

The K-Tuned V-Stack combo features a Dry Filter that can be washed and re-oiled. The combo includes: V-Stack (3" or 3.5") V-Stack Filter, Silicone ...

The Honda ZDX throttle body is a great upgrade for DBW (Drive By Wire) cars looking to increase airflow. It offers OEM reliability at an affordable...

The factory Polaris RZR® throttle body boot is known to rip due to the soft rubber with internal metal plate molded into the rubber. The factory pa...

3" ID Round Filter Notes: Direct Replacement For Jeep Kits 12-15 civic kits S2000 Kits BRZ kits

The Universal Kraftwerks Performance High-Velocity Intake Kit reduces heat soak and maximizes airflow and velocity on any induction system.  T...

The Universal Kraftwerks Performance High-Velocity Intake Kit reduces heat soak and maximizes airflow and velocity on any induction system.  T...

The Universal Kraftwerks Performance High-Velocity Intake Kit reduces heat soak and maximizes airflow and velocity on any induction system.  The ki...

The Universal Kraftwerks Performance High-Velocity Intake Kit reduces heat soak and maximizes airflow and velocity on any induction system.  T...

The Rosko Racing H22 Euro-R idle air control valve adapter plate was designed so that you can use a USDM 2 wire H22 IACV on your Euro-R intake mani...

The Rosko Racing H22 Euro-R IACV relocation kit kit is for relocating and adapting a USDM two wire H series Idle Air Control Valve on a H22 Euro-R ...

The Rosko Racing H series Idle Air Control Valve mounting plate can be used in building your own custom IACV relocation kit for intake manifolds th...

The Rosko Racing IACV relocation kit is specifically designed for the Skunk2 intake manifold. The manifold side plate mounts to the rear of a Skunk...

Mishimoto has developed a performance air intake engineered specifically for the 2001–2006 BMW E46 330i. This E46 intake is safe to use with the st...

Mishimoto has developed a performance air intake engineered specifically for the 1999–2005 BMW E46 323i/325i/328i. This intake is safe to use with ...

Restore and renew your dirty Mishimoto Performance Air Filter! The Mishimoto Air Filter Re-Oil Kit includes everything you need to fully service yo...

Smooth out your intake with the Mishimoto 350Z induction hose kit. 5-ply silicone construction makes it more durable than the stock rubber hose, an...

Add some additional style and efficiency to your existing Mishimoto Performance Air Intake! This powdercoated, black airbox will divert more cold o...

Mishimoto is proud to release a direct-fit silicone boot kit for your Nissan Titan XD. With Duracore™ technology, this boot kit is the perfect upgr...

Mishimoto has developed a line of Heat Resistant Silicone Ducting, available in four sizes to fit a variety of vehicles and uses. Mishimoto Heat Re...

Mishimoto has developed a line of Heat Resistant Silicone Ducting, available in four sizes to fit a variety of vehicles and uses. Mishimoto Heat Re...

Mishimoto has developed a line of Heat Resistant Silicone Ducting, available in four sizes to fit a variety of vehicles and uses. Mishimoto Heat Re...

Mishimoto's silicone induction hose for the Honda S2000 is constructed from a combination of high-grade silicone and heat-resistant fibers, making ...

Provide your performance vehicle with superior air filtration and optimal airflow with a Mishimoto Performance Air Filter! Mishimoto oiled air filt...

Our engineers have put a lot of R&D hours into the Mishimoto Performance Intake for the 2016+ Chevy Camaro 2.0T. We went through several design...

Give your Fiesta ST the airflow it deserves. The Mishimoto Fiesta ST intake cranks the power up by 6 whp and 10 wtq while running on the stock tune...

Give your Fiesta ST the airflow it deserves. The Mishimoto Fiesta ST intake cranks the power up by 6 whp and 10 wtq while running on the stock tune...

Ford has finally manufactured a Focus wielding the “RS” badge, and we couldn’t be happier. We wanted to improve and upgrade a lot of things on this...

Do want power, styling, and durability? The Mishimoto Focus ST intake has them all. With dyno proven maximum gains of 6 whp and 5 wtq, this Focus S...

We know performance is important to your EcoBoost Mustang, which is why Mishimoto is proud to introduce a line of direct-fit and highly-efficient 2...

Give your 2018+ Honda Accord 2.0T the attitude it deserves with the Mishimoto Performance Air Intake. Honda might have left behind the V6 with the ...

Our performance air intake for the 2016+ Honda Civic 1.5L Turbo is finally here! This intake was engineered specifically for the new turbocharged C...