FuelTech

Use this kit when building a custom harness while using injectors with Nippon Denso connectors.Kit Includes: Nippon Denso injector connector, (2) t...

This connector kit is used with the PROBIKE B Expansion Harness to utilize extra inputs or outputs.

This connector kit is used with the PRO550 & PRO600 V8 Complete Harness to utilize extra inputs or outputs.

Typically used to monitor fuel, oil, and wastegate pressure.*Not compatible with PRO500/PRO600 or other complete FuelTech engine harnesses. Use PS-...

This connector kit is used with the PRO550 & PRO600 V8 Complete Harness to utilize extra inputs or outputs.

This connector kit is used with the PRO550 & PRO600 V8 Complete Harness to utilize extra inputs or outputs.

This connector kit is used with the PRO600 V8 Complete Harness to utilize extra inputs.

*Color may vary based on stock availability.

Type K Miniature Thermocouple Connector.This thermocouple connectors are 2 pin flat mini size TC connectors designed to connect temperature sensor ...

This adapter harness is used to connect the CAN bus data stream from your FuelTech ECU to the Racepak IQ3S (Street Dash), IQ3D (Drag Dash) or Racep...

The new Universal EFI Interface Module from Racepak streams CAN-based data from aftermarket ECU systems to any Racepak data logger or dash display....

This solid state relay is required when running dual solenoid / big stages of nitrous. One relay required per nitrous stage.Use with FT600 / F550 /...

Automotive relay holder for 4 or 5 pin Mini ISO relays (Regular 40A relays)Perfect relay connector to use with the 40A relay with built in fuse (ht...

High quality sealed relay which is typically used for ECU, injectors, and coils when building your own harness.One relay required per item being wi...

Sealed Fuse Kit includes: (1) Sealed fuse holder w/ dust cap (2) 10-12 GA Terminals (1) 40A Fuse

High quality sealed relay which is typically used for ECU, injectors, and coils when building your own harness.One relay required per item being wi...

Use this Sealed Relay Holder to make installation easier when using a Sealed Relay.

Use this Sealed Relay Holder Kit to make installation easier when using a Sealed Relay. Comes with (2) 10-12 GA / (2) 18-20 GA terminals.

FEATURESThis relay can be used for the following: FT600 / FT550 / FT500 / FT500LITE / FT450 built-in Staging Control FT600 / FT550 / FT500 / FT500L...

Simplify installation of your FTSPARK with our chassis mounting bracket.Available sizes: 1.375", 1.500" and 1.625"

Simplify installation of your FTSPARK with our chassis mounting bracket.Available sizes: 1.375", 1.500" and 1.625"

Monitor crankcase vacuum inside your engine to make sure piston rings are sealing properly in the cylinders. Output: 0.5-4.5V Supply: 5V Range: -15...

Wideband O2 sensor display and conditioner for Bosch LSU 4.2 sensors.

FuelTech's billet vacuum distribution manifold is the perfect solution for running and organizing all of the vacuum lines on your race car. With 7 ...

The VR-HALL converter was designed to read an analog VR signal and transform it to a digital signal (Hall). Recommended when using VR speed sensors...

GM style water temperature sensor. Standard water/coolant sensor for all FuelTech ECUs.Thread size: 3/8" NPT

Standard Oxygen Sensor Bung M18 x 1.5 Thread Material: Stainless steel

USB cable for PowerFT line ECUs: FT600 / FT550 / FT500 / FT500LITE / FT450

This USB/CAN Converter Cable is compatible with the following products: FT400 / FT350 / FT300 / FT250 BoostController 2 GearController Update firmw...

Note: Requires Turbosmart Blackbox Electronic Wastegate Controller The new eWastegates are a direct fit upgrade to all 4th-generation Turbosmart wa...

APPROVED FOR USE IN DRAG RACING FuelTech’s FT PRO Drag Racing Harness is SFI 16.5 certified, exceeding the rigorous standards to ensure driver safe...