Forge Motorsport

Fits: GT-R R35 Models: 2007- 2019 4 Line set  Why should I change my to Braided Stainless Steel ones? YOUR SAFETY! Better brake pedal...

This actuator is designed for the Nissan GTIR. (the version that has a bent actuator rod) Forge Motorsport were one of the first company’s in the...

This actuator is designed for the Nissan GTIR (the version that has a straight actuator rod) Forge Motorsport were one of the first company’s in ...

This actuator is designed for the Nissan S14 (the version that has a bent actuator rod) Forge Motorsport were one of the first company’s in the w...

Fits: R32-GT-R Models: 1989-1994 4 Line set.  Stainless steel fittings used throughout (not plated mild steel). Why should I change my to Braided...

We recommend servicing your valve every 3 years, or 20,000 miles, whichever comes sooner Made from billet aluminium and hand polished in the UK, ...

We recommend servicing your valve every 3 years, or 20,000 miles, whichever comes sooner Made from billet aluminium, this atmospheric diverter va...

We recommend servicing your valve every 3 years, or 20,000 miles, whichever comes sooner Forge Motorsport are pleased to offer a Blow Off Valve (...

Pair of Actuators for Nobel M12M40. Forge Motorsport were one of the first company’s in the world to design and manufacture the billet two-piece ...

This hose and plug kit is designed to enable removal of the noise pipe (engine amplification pipe) on any transverse FSI or TSI vehicle which has t...

Oil Breather Filter with a 28mm inner diameter connection. Please watch our video on how to fit an air filter without damaging it.  

Following on from the success of our billet catch can kit for the Golf Mk5 and Golf Mk6, we are pleased to present another of our kits for the Golf...

Please note, this catch can only fits right hand drive vehicles Highlights: 0.4L capacity* Bespoke fitting kit for Hyundai i20N A drain tap...

This oil catch tank kit is the product of many months of intensive research and development by our in-house development team, and the end result is...

This oil catch tank kit is the product of many months of intensive research and development by our in-house development team, and the end result is...

This oil catch tank kit is the product of many months of intensive research and development by our in-house development team, and the end result is...

This fits vehicles with a Charcoal Filter Installed. Excess crankcase pressure is vented from the crankcase through the PCV system, where it is d...

Excess crankcase pressure is vented from the crankcase through the PCV system, where it is drawn into the intake manifold and returned by the engin...

PLEASE NOTE: This Oil Cooler Kit has been designed for use in conjunction with the Forge Motorsport front mount intercooler (FMINT500). It will not...

  Developed, designed, and influenced from our direct involvement with BTCC and success with the Hyundai i30N, we are proud to release an oil coo...

This will fit both left and right hand drive vehicles Due to the Toyota Yaris GR’s huge popularity as a fast road car, it was only logical that i...

Developed from our direct involvement within the BTCC and Mini Challenge race series where we have provided race proven and championship winning co...

This Oil Cooler kit has been specifically designed to fit the VW T5.1 fitted with the twin turbo diesel engine (180hp). The kit includes a filter...

An all new one way valve has been designed specifically for vehicles that have supercharger or turbo conversions, with 13mm fittings. It is fitted ...

A complete set of brake pad retainers, slider pins and bolts to fit Forge Motorsport 6 Pot caliper

Pair of Actuators for Porsche 993. These pair of replacement actuators, for the Porsche 993 turbo, utilise the latest design to irradicate the fa...

A pair of replacement piston actuators for the Nissan 350Z which can be adjusted to suit the operational requirements by changing the internal spri...

We recommend servicing your valve every 3 years, or 20,000 miles, whichever comes sooner These valves have been specifically designed and enginee...

A pair of replacement actuators for the Nissan GTR R35.These actuators will fit UK, Japanese and US cars. This product is assembled with springs s...

All Forge panel filters are supplied with a very light spray misting of retention oil to stop ingress of particles and dust and deliver outstanding...

Fits: 207  Models: 2006 - 2014 4 Line set Why should I change my to Braided Stainless Steel ones? YOUR SAFETY! Better brake pedal fee...

The Peugeot 208 GTi & Citroen DS3 hardpipes replace the turbo to intercooler and intercooler to throttle body plastic pipes on the top of your ...

A set of 4 ultra-high performance brake lines for the Peugeot 308 GTI 2017 onwards. These are a direct replacement/upgrade for the OEM brake line s...

Fits: RCZ THP156 1.6T Models: 2010 - 2015 4 Line set  Why should I change my to Braided Stainless Steel ones? YOUR SAFETY! Better bra...

*generic photo used Fits: RCZ THP200 1.6T Models: 2010 - 2015 2 line set  Why should I change my to Braided Stainless Steel ones? Y...

WARNING:  Installation of a boost solenoid is not for the tuning novice. Any boost controller manual or electronic must be fitted with caution. T...

The solenoid pictured is just for reference and is not included with this product. Only 1 x wiring connector is supplied.  This wiring harness ha...

Pipercross Carbon Foam Air Filter Canister with 102mm O/D Inlet/Outlets This comes as part of the Following Kits: FMIND5R32- Vw Golf Mk5 R32 In...

This is a replacement carbon canister including Pipercross filter that fits the FMINDGOLR twintake and Fiat FMINDF500 These have been created exc...

We recommend servicing your valve every 3 years, or 20,000 miles, whichever comes sooner Alloy Recirculating Valve available to fit the Impreza 2...

Piston Seal kit for 4 Pot Rear Caliper

A replacement turbo actuator for the Saab 9000 Aero. This actuator uses a piston design for maximum longevity in comparison to the OEM diaphragm un...

A replacement polyurethane bush for the rear control arm or tie bar as fitted to the Audi TT Mk1 4 wheel drive, Audi S3 Mk1  and Skoda Octavia MK1 ...

Fits: 993  Models: 1996 4 Line set Why should I change my to Braided Stainless Steel ones? YOUR SAFETY! Better brake pedal feel – fir...

Fits: 996 Models: 1997 - 2006 4 Line set  Why should I change my to Braided Stainless Steel ones? YOUR SAFETY! Better brake pedal fee...

We recommend servicing your valve every 3 years, or 20,000 miles, whichever comes sooner A Pair of Porsche 991/911 Recirculating Valves. These ...

Fits: 991 Model: 2011 - 2016 4 Line set Why should I change my to Braided Stainless Steel ones? YOUR SAFETY! Better brake pedal feel ...

Product fitment will take approximately 1 hour at our Gloucester, UK HQ by one of our highly skilled technicians. We will be in contact after you p...