Forge Motorsport

Fits: Jarama 400GTS Models: 1970 - 1976 4 Line set  Why should I change my to Braided Stainless Steel ones? YOUR SAFETY! Better brake...

Fits: Muira (OEM Standard layout) Models: 1968-1973 4 Line set  Why should I change my to Braided Stainless Steel ones? YOUR SAFETY! ...

Dump / Blow Off Valve Fitting Kit.   In The Box: 1 x 35mm Hose Clamp 1 x 25mm Blanking Plug 1 x Forge Sticker

This actuator is designed for the Audi A4 and Volkswagon Passat 1.8T engines that are longitudinally mounted. ( crankshaft of the engine runs inlin...

A set of 5 Silicone Coolant hoses for the MK5 2 Litre Golf. These hoses are sold as an additional set to our FMKC010 hose kit and are often referre...

Fits: MX5 1.8 Models: 1994 - 2005 4 Line set  Why should I change my to Braided Stainless Steel ones? YOUR SAFETY! Better brake pedal...

We recommend servicing your valve every 3 years, or 20,000 miles, whichever comes sooner With great looks and performance to back them up, the Ma...

Mega Flex Wire Reinforced Silicone Straight 16mm Technical Details Mega Flex straight hoses are 1 metre in length. Available from 13mm diame...

Mega Flex Wire Reinforced Silicone Straight 19mm Technical Details Mega Flex straight hoses are 1 metre in length. Available from 13mm diame...

Mega Flex Wire Reinforced Silicone Straight 25mm Technical Details Mega Flex straight hoses are 1 metre in length. Available from 13mm diame...

Mega Flex Wire Reinforced Silicone Straight 28mm Technical Details Mega Flex straight hoses are 1 metre in length. Available from 13mm diame...

Mega Flex Wire Reinforced Silicone Straight 30mm Technical Details Mega Flex straight hoses are 1 metre in length. Available from 13mm diame...

Mega Flex Wire Reinforced Silicone Straight 32mm Technical Details Mega Flex straight hoses are 1 metre in length. Available from 13mm diame...

Mega Flex Wire Reinforced Silicone Straight 35mm Technical Details Mega Flex straight hoses are 1 metre in length. Available from 13mm diame...

Mega Flex Wire Reinforced Silicone Straight 38mm Technical Details Mega Flex straight hoses are 1 metre in length. Available from 13mm diame...

This product offers a performance increase of up to 20 BHP as well as enhancing the induction noise! The combination of both intake adapter and a...

This is a replacement Pipercross filter that fits the FMINDK20 intake. These have been created exclusively for Forge by filtration gurus Pipercro...

This turbo blanket should be fitted OVER the existing OEM heat shield The Forge Motorsport FMTUBL9 has been designed for the Mercedes A45, GLA, C...

While developing and testing our range of chargecooler radiators of Mercedes Flag ship A45 AMG (Pre-Facelift), we took the time to develop a DSG oi...

Fits: A45 AMG Models: 2013 - 2018 4 Line set Why should I change my to Braided Stainless Steel ones? YOUR SAFETY! Better brake pedal ...

At Autosport 2005, we were proud to release our uprated Intercooler for the BMW Mini Cooper S. After a comprehensive development program involving ...

A silicone intake hose for the R53 model (up to 2007) BMW Mini Cooper S (Supercharged). Available in blue, red, or black   The Forge silico...

Forge Motorsport accept no responsibility for damage caused to the vehicle by incorrect installation or setup of this product As the official and...

A set of 4 ultra-high performance brake lines for the Mini F56 JCW. These are a direct replacement/upgrade for the OEM brake line set and require n...

As the preferred and official supplier of intercoolers to Mini Challenge, we are proud to present our intercooler for the Mini JCW F56 Chassis (201...

Developed from our direct involvement with the Mini Challenge series, Forge is proud to release an oil cooler adapter plate for the BMW Mini B48 en...

This Forge Motorsport high flow intake charge hose fits to the throttle body at the rear of the engine bay and is specifically designed to fit the ...

Forge Motorsport accept no responsibility for damage caused to the vehicle by incorrect installation or setup of this product As the official and...

A replacement polyurethane bush for the Forge Motorsport Mini adjustable rear tie bars.  FMRCAM and FMRCAMF56 Please note that one pair is requ...

Fits: Colt - CZT 1.5 Turbo  Models: 2002 - 2013 4 Line set  Why should I change my to Braided Stainless Steel ones? YOUR SAFETY! Bett...

We recommend servicing your valve every 3 years, or 20,000 miles, whichever comes sooner Made from billet aluminium, this atmospheric diverter va...

We recommend servicing your valve every 3 years, or 20,000 miles, whichever comes sooner Made from billet aluminium, this atmospheric diverter va...

We recommend servicing your valve every 3 years, or 20,000 miles, whichever comes sooner Made from billet aluminium, this recirculating diverter ...

We recommend servicing your valve every 3 years, or 20,000 miles, whichever comes sooner Made from billet aluminium, this atmospheric diverter va...

We recommend servicing your valve every 3 years, or 20,000 miles, whichever comes sooner Made from billet aluminium, this recirculating diverter ...

Fits: GTO (3000 GT) Models: 1990 - 2000 8 Line set  Why should I change my brake lines to Braided Stainless Steel ones? YOUR SAFETY!! ...

These actuators are designed for the Mitsubishi GTO (3000GT) twin turbo engines (priced per pair). Manufactured from Billet aluminium, these Forge ...

Fits: Mitsubishi Lancer Evo 10 Production run: 2007-2016 4 lines set Stainless steel fittings used throughout (not plated mild steel). Wh...

Fits: Mitsubishi Lancer Evo5 Production run: 1998-1999 4 line set Stainless steel fittings used throughout (not plated mild steel) Why sh...

Fits: Mitsubishi Lancer Evo 6 Production run: 1999-2001 4 lines set Stainless steel fittings used throughout (not plated mild steel)  Why...

Fits: Mitsubishi Lancer Evo 7 Production run 2001-2003 4 Line set Stainless steel fitings used throughout (not plated steel) Why should I...

Fits: Mitsubishi lancer Evo 8/9 Production run: 2003-2007 4 line set Stainless steel fittings used throughout (not plated mild steel). Wh...

Fits: Mitsubishi Lancer Evo 9 Models: 2005-2007 4 Line set. Stainless steel fittings used throughout (not plated mild steel). Why should ...

THIS PRODUCT DOES NOT FIT LEFT HAND DRIVE VEHICLES The Forge Motorsport high flow intake hose for the MQB platform 2.0 engines, eliminates the hi...

The Forge silicone hoses in this kit have been designed to include an expensive inner liner of modified silicone known as Fluorosilicone with a h...

PLEASE TAKE CARE TO READ THE FITTING INSTRUCTIONS FULLY BEFORE PUSHING THE INSERT INTO THE BODY OF THE CAP!    This billet aluminium oil cap wi...

Neotech Dump Valve Diaphragm

Fits: 350Z Models: 2003 - 2008 6 Line set  Why should I change my to Braided Stainless Steel ones? YOUR SAFETY! Better brake pedal fe...