Forced Induction

Fitting, Straight 3/8" NPT male to -6 AN, Male to Male.

Male to male, metric 14mm (1.5 pitch) x -4 AN flare fitting. Includes sealing washer.

14mm Banjo/straight, 12" long steel braided hose, -6 AN For use as a coolant or oil line. Fitting Solution: Easy conversion back to hose barb: AT...

14mm Banjo/straight, 8" long steel braided hose, -6 AN. For use as a coolant or oil line. Fitting Solution: Easy conversion back to hose barb: ...

Straight/straight, 36" steel braided hose, -6 AN, for use as a coolant or oil line.

14 mm hole steel long nose banjo fitting (for 14mm bolt) with -6 AN male flare.

14 mm steel longnose banjo kit. Qty. (1), banjo fitting 14mm hole (for 14mm bolt) with -6 AN male flare Qty. (1), banjo bolt (14mm x 1.5 pitch) Qt...

ATP Turbo Plug-14mm

Machined oil supply fitting for 2009 and up 2.0T (TSI) engine block.Comes with: Machined adapter with o-ring seal to block -3 AN adapter attached ...

(1) Aluminum Plug, 1/8" NPT for oil or fuel port.

Straight 1/8" NPT to -3 AN, Male to Male.

Straight 1/4" NPT to -4 AN, Male to Male.

Straight 1/8" NPT to -4 AN, Male to Male.

Straight 1/2" NPT to -10 AN, Male to Male.

Fitting, Swivel, -10 AN Flare, Male to Female, 90 Degree, Converts Straight -10 hose end to 90D while extending the line a bit. Very convenient.

Custom #6 (-6AN) steel braided line including hose ends.Select a specific line length; and choose either a straight, 45 degree, or 90 degree fittin...

Oil Return Line -10AN (#10 SIZE) - 28" Length with straight end and 45 degree, Stainless Steel Braided Oil Return line 28" Length with -10 Swivel E...

Oil Return Line -10 - 18" ST/ST Stainless Steel Braided Oil Return line 18" Length with -10 Swivel Ends. Straight to Straight.

Oil Return Line -10 - 16" ST/ST Stainless Steel Braided Oil Return line 16" Length with -10 Swivel Ends. Straight to Straight.

Oil Return Line -10 - 15" ST/90 Stainless Steel Braided Oil Return line 15" Length with -10 Swivel Ends. Straight to 90 ends.

Oil Return Line -10 - 12" Length with straight end and 90 degree, Stainless Steel Braided Oil Return line 12" Length with -10 Swivel Ends. Straight...

Oil Return Line -10 - 12" Length with straight end and 45 degree, Stainless Steel Braided Oil Return line 12" Length with -10 Swivel Ends. Straight...

Oil Return Line -10 - 12" ST/ST Stainless Steel Braided Oil Return line 12" Length with -10 Swivel Ends. Straight to Straight.

O-ring for compressor housing to backplate on GT4088R GT4094R or GT3788R and GTX

Oil fitting kit, for testing oil pressure right at the oil inlet hole on GTBB turbos, after the .035" restrictor, good for trouble shooting oil lea...

Adapter fitting ( AKA threaded bushing / sleeve ) 1/4" NPT male to 1/8" NPT female stepdown.Sometimes the fitting you want to use is only available...

Quick connect fitting Male 5/16" size to -6 AN male. Allows ease of transition from -6 AN to the newer O-ringed squeeze and release type fitting fo...

Quick connect fitting Male 3/8" size to -6 AN male. Allows ease of transition from -6 AN to the newer O-ringed squeeze and release type fitting fou...

Adapter fitting, feet assembly for bottom of Bosch 044 pump. Allows pump to be submerged and allows for proper pickup at bottom of tank. Avoids the...

Aluminum, Banjo Fitting 12mm Hole With -6AN Male Flare. Perfect high volume fuel fitting for devices such as Bosch 044 pump

Fitting, 1/4" NPT to 6AN Flare, Male to Male, 90 deg Adapter.

Fitting, Metric 12mm (1.5 pitch) to -4 AN Flare. Sealing washer included on metric side. 12mm x 1.5.

Aluminum Banjo Fitting, 14mm hole (for 14mm bolt) with -6 AN male flare

Banjo fitting kit for coolant (water) ports on Garrett ball bearing GT25, GT28, GTX28, GTX29, GT30, GTX30, GT35 and GTX35 series turbochargers. Als...

Weld bung, aluminum, -10 an male flare, has appropriate bore throughout and seat in the back end for weld bead. Perfect for oil drain (at engine bl...

Fitting, Swivel, -10 AN Flare, Male to Female, 45 Degree, Converts Straight -10 hose end to 45D while extending the line a bit. Very convenient.

Fitting, Swivel, -6 AN Flare, Male to Female, 45 Degree, Converts Straight -6 hose end to 45D.

Fitting, Metric 10mm (1.5 pitch) to -4 AN Flare. Sealing washer included on metric side.

1/4" inverted flare to 3AN male to male fitting. Unrestricted version of ATP-OIL-021 but for -3 oil feed line input. Appropriate for ball bearing o...

Banjo Bolt for low profile oil feed line on GT and GTX Ball Bearing turbochargers. Optional (not required) 3 crush washers.CRUSH WASHERS ARE NOT IN...

End Cap -4 AN/JIC, Caps off a -4 (#4) male. Product Notes ** 1 End Cap sold per unit **

Tee Fitting, 3 way flare male size -4 AN/JIC, for teeing in an oil pressure gauge or temp gauge.

Adapter -4AN male flare to 1/8" BSP male for oil adapter on British oil fittings to AN/JIC -4 flare.

Rod Extension kit for internal wastegate actuator, (1)coupler, (2) nuts, (1) threaded rod 2" long.

1/2" NPT FEMALE WELD BUNG FOR OIL PAN, SPECIFY STEEL OR ALUMINUM

Steel braided Hose, -6 AN, for use as coolant line or oil line, 24 inches long. -6AN Straight Hose End and -6AN Straight Hose End.PRODUCT CONTENT: ...

Steel braided Hose, -6 AN, for use as coolant line or oil line, 6 inches long. -6AN Straight Hose End and -6AN Straight Hose End.PRODUCT CONTENT: ...

Steel braided Hose, -6 AN, for use as coolant line or oil line, 12 inches long.HOSE END OPTIONS: -6AN Straight Hose End and -6AN Straight Hose End...