Forced Induction

Oil Return Line -10 - 12" Length with straight end and 90 degree, Stainless Steel Braided Oil Return line 12" Length with -10 Swivel Ends. Straight...

Oil Return Line -10 - 12" Length with straight end and 45 degree, Stainless Steel Braided Oil Return line 12" Length with -10 Swivel Ends. Straight...

Oil Return Line -10 - 12" ST/ST Stainless Steel Braided Oil Return line 12" Length with -10 Swivel Ends. Straight to Straight.

O-ring for compressor housing to backplate on GT4088R GT4094R or GT3788R and GTX

Oil fitting kit, for testing oil pressure right at the oil inlet hole on GTBB turbos, after the .035" restrictor, good for trouble shooting oil lea...

Adapter fitting ( AKA threaded bushing / sleeve ) 1/4" NPT male to 1/8" NPT female stepdown.Sometimes the fitting you want to use is only available...

Quick connect fitting Male 5/16" size to -6 AN male. Allows ease of transition from -6 AN to the newer O-ringed squeeze and release type fitting fo...

Quick connect fitting Male 3/8" size to -6 AN male. Allows ease of transition from -6 AN to the newer O-ringed squeeze and release type fitting fou...

Adapter fitting, feet assembly for bottom of Bosch 044 pump. Allows pump to be submerged and allows for proper pickup at bottom of tank. Avoids the...

Aluminum, Banjo Fitting 12mm Hole With -6AN Male Flare. Perfect high volume fuel fitting for devices such as Bosch 044 pump

Fitting, 1/4" NPT to 6AN Flare, Male to Male, 90 deg Adapter.

Fitting, Metric 12mm (1.5 pitch) to -4 AN Flare. Sealing washer included on metric side. 12mm x 1.5.

Aluminum Banjo Fitting, 14mm hole (for 14mm bolt) with -6 AN male flare

Banjo fitting kit for coolant (water) ports on Garrett ball bearing GT25, GT28, GTX28, GTX29, GT30, GTX30, GT35 and GTX35 series turbochargers. Als...

Weld bung, aluminum, -10 an male flare, has appropriate bore throughout and seat in the back end for weld bead. Perfect for oil drain (at engine bl...

Fitting, Swivel, -10 AN Flare, Male to Female, 45 Degree, Converts Straight -10 hose end to 45D while extending the line a bit. Very convenient.

Fitting, Swivel, -6 AN Flare, Male to Female, 45 Degree, Converts Straight -6 hose end to 45D.

Fitting, Metric 10mm (1.5 pitch) to -4 AN Flare. Sealing washer included on metric side.

1/4" inverted flare to 3AN male to male fitting. Unrestricted version of ATP-OIL-021 but for -3 oil feed line input. Appropriate for ball bearing o...

Banjo Bolt for low profile oil feed line on GT and GTX Ball Bearing turbochargers. Optional (not required) 3 crush washers.CRUSH WASHERS ARE NOT IN...

End Cap -4 AN/JIC, Caps off a -4 (#4) male. Product Notes ** 1 End Cap sold per unit **

Tee Fitting, 3 way flare male size -4 AN/JIC, for teeing in an oil pressure gauge or temp gauge.

Adapter -4AN male flare to 1/8" BSP male for oil adapter on British oil fittings to AN/JIC -4 flare.

Rod Extension kit for internal wastegate actuator, (1)coupler, (2) nuts, (1) threaded rod 2" long.

1/2" NPT FEMALE WELD BUNG FOR OIL PAN, SPECIFY STEEL OR ALUMINUM

Steel braided Hose, -6 AN, for use as coolant line or oil line, 24 inches long. -6AN Straight Hose End and -6AN Straight Hose End.PRODUCT CONTENT: ...

Steel braided Hose, -6 AN, for use as coolant line or oil line, 6 inches long. -6AN Straight Hose End and -6AN Straight Hose End.PRODUCT CONTENT: ...

Steel braided Hose, -6 AN, for use as coolant line or oil line, 12 inches long.HOSE END OPTIONS: -6AN Straight Hose End and -6AN Straight Hose End...

Fitting, 1/4" NPT to 6AN Flare, Male to Male, 45 deg Adapter

Fitting, 1/4" NPT to 6AN Flare, Male to Male, Straight Adapter.

Fitting, Male to Male, Metric 16mm (1.5pitch) x 6AN Flare, With sealing Washer. Provides easy way to connect to steel braided type lines with #6 AN...

Banjo Only - 14mm Aluminum For coolant connections on GT25R/GT28R/GT30R/GT35R Turbochargers. 14mm banjo to 1/4" NPT - Very flexible when used with ...

1/4" Barb to 1/8" NPT straight female fitting.

End plug, -6 AN/JIC male plug. Used to terminate and close off the end of a -6 AN/JIC coolant line

End Cap, -3 AN/JIC, Caps off a -3 (#3) male

Steel braided Hose (with a 14mm Banjo hose end and a -6AN straight hose end), -6 AN, for use as a coolant line or oil line, 24 inches long. 14mm Ba...

Steel braided Hose (with a 14mm Banjo hose end and a -6AN straight hose end), -6 AN, for use as a coolant line or oil line, 18 inches long. 14mm Ba...

Steel braided Hose (with a 90 Degree hose end and a straight hose end), -6 AN, for use as a coolant line or oil line, 8 inches long. -6AN 90 Degree...

Steel braided Hose (with a 90 Degree hose end and a straight hose end), -6 AN, for use as a coolant line or oil line, 10 inches long. -6AN 90 Degre...

Steel braided Hose (with a 90 Degree hose end and a straight hose end), -6 AN, for use as a coolant line or oil line, 24 inches long. -6AN 90 Degre...

Steel braided Hose (with a 90 Degree hose end and a straight hose end), -6 AN, for use as a coolant line or oil line, 18 inches long. -6AN 90 Degre...

Steel braided Hose (with a 90 Degree hose end and a straight hose end), -6 AN, for use as a coolant line or oil line, 12 inches long. -6AN 90 Degre...

Steel braided Hose, -6 AN, for use as a coolant line or oil line, 18 inches long. -6AN Straight Hose End and -6AN Straight Hose End.PRODUCT CONTENT...

-4AN 3 way tee fitting.Includes two male -4AN fitting ends and one female -4AN fitting end.

End Cap -10 AN/JIC, Caps off a -10 (#10) male Product Notes ** 1 End Cap sold per unit **

End Cap -6 AN/JIC, Caps off a -6 (#6) male Product Notes ** 1 End Cap sold per unit **

Banjo Bolt, M12 x 1.25 Thread Pitch

STEEL Banjo fitting, 14mm hole (for 14mm bolt) with -6 AN male flare.