F Brand Collection

This pair of Forge turbo blankets are designed for the N54 BMW (1M, 135i, 335i) and designed to isolate the radiant heat produced by the turbocharg...

The Forge turbo blankets are designed to isolate the radiant heat produced by the turbocharger. Designed by the Forge development team on the Forge...

K03/K04 Forge Turbo Blanket - This blanket fits a multitude of applications - Please check the listing below The Forge turbo blanket is designed ...

THIS WILL ONLY FIT 4" INTAKES - THIS WILL NOT FIT THE STOCK AIRBOX. THIS WILL ONLY FIT THE MK3 I30N With Forge leading the way in aftermarket pro...

We recommend servicing your valve every 3 years, or 20,000 miles, whichever comes sooner This recirculating valve is for the Renault and Nissan T...

We recommend servicing your valve every 3 years, or 20,000 miles, whichever comes sooner This Blow Off, or dump valve, is for the Renault and Nis...

Inlet temperatures lowered by 20°C (68°F) An increase of over 100% extra capacity Triple pass water flow meaning maximum cooling efficiency....

Before fitment, please ensure the spacer fits flat to the back of the wheel. Please also test for clearance after fitment at the wheel arch under f...

Inlet temperatures to be lowered by 20°C (68°F) Increase of over 50% extra capacity Fabricated in the UK Guaranteed for life Forge has a...

In order to ensure that you have the correct hose clamps for your hoses, we have put together a full kit, to ensure a perfect fit. These worm drive...

This Forge intake kit is for the VW Up 1.0 TSI and GTI. Our intake kit includes a bespoke aluminium housing, powder coated black for that OEM look ...

This is a replacement Pipercross filter that fits the FMINDK20 intake. These have been created exclusively for Forge by filtration gurus Pipercro...

A replacement high flow performance air filter for our popular FMINDK14 and FMINDK14-GTE induction kits. The filter will also replace the paper e...

This is a replacement Pipercross filter that fits the FMINDK4 and FMIND16 intake. These have been created exclusively for Forge by filtration gur...

Hyundai i30N and Veloster N short shifter and side shifter set. This part has been developed in conjunction with our work on the BTCC championship ...

The solenoid pictured is just for reference and is not included with this product. Only 1 x wiring connector is supplied.  This wiring harness ha...

A set of five boost/intercooler hoses for the Suzuki Swift Sport 1.4 ZC33S, which replace all of the OEM rubber hoses in the boost system. The kit ...

A set of three coolant hoses for the Suzuki Swift Sport 1.4 ZC33S, which replace three of the OEM rubber hoses in the coolant system. The kit consi...

WARNING:  Installation of a boost solenoid is not for the tuning novice. Any boost controller manual or electronic must be fitted with caution. T...

This hoses replaces the OEM Renault pipe, part number: 16 57 542 63R This reinforced silicone intake hose fits the Renault Megane RS 4 280 & ...

The Forge Motorsport high flow inlet hose for the Peugeot 208 GTI face lift model from late 2016 onwards (208bhp EP6-FDTX Euro 6 Engines) replaces ...

While developing and testing our range of chargecooler radiators of Mercedes Flag ship A45 AMG (Pre-Facelift), we took the time to develop a DSG oi...

The Forge Motorsport intercooler is a perfect performance enhancing product that fits directly to the OEM mounting points making for an easy instal...

We can build a custom wastegate actuator to your exact specifications! Please see the PDF under the 'Fitting Instructions' tab for more information...

A replacement actuator for Garrett Turbo GTX2867R actuator part number 480009. Forge Motorsport were the first company in the world to desi...

HoseTechnik are proud to present a high-performance 4 piece brake line set for the VW UP. These are a direct replacement/upgrade for the OEM brake ...

Before fitment, please ensure the spacer fits flat to the back of the wheel. Please also test for clearance after fitment at the wheel arch under f...

Developed from our direct involvement with the Mini Challenge series, Forge is proud to release an oil cooler adapter plate for the BMW Mini B48 en...

A replacement pleated or foam filter for the FMINDMK7 induction kit. As some of our customers prefer a pleated filter, you now have the choice to...

These Hyundai i30N braided brake lines are the perfect upgrade for anyone looking to enhance the braking pedal feel even further.  This part has ...

With modern day aftermarket ECU tuning pushing powerful engines harder, in certain conditions the vehicle will run the risk of receiving inadequate...

Hosetechnik are proud to release a high-performance 4 piece brake line set for the BMW i8 Hybrid sports car. These are a direct replacement/upgrade...

This valve kit allows the fitment of a fast response blow off valve on the VAG 1.0 TSI/GTI engine, including the VW UP. As the e...

The Forge Motorsport high flow turbo elbow for the RHD and LHD RS3 8V Facelift and TTRS 8S eliminates the highly restrictive Aluminium inlet pipe, ...

Make someone feel special by giving them the gift of this Forge Motorsport Wooden Merchandise Box. This high quality package is the perfect present...

Secondary air flow filter for the Golf Mk7 with Secondary Air Injection (SAI) Some VW Golf Mk7’s have a secondary air intake pipe connected to th...

This oil catch tank kit is for the Audi TTRS 8S and Audi RS3 2017-on, developed by our in-house development team. Not only is it beautifully design...

The Forge Motorsport FMTUBL5 has been designed for the Fiat 500, 595, and 695 turbo (this will not fit those fitted with IHI turbo). This turbo bla...

A set of Silicone Turbo Hoses for the Mini/Clubman/Countryman Cooper S 2007 onwards (N18 engine). The standard hoses can be restrictive and more so...

This part has been developed in conjunction with our work on the BTCC championship winning Hyundai i30N's - read more here Our uprated valve for ...

Introducing the Fiat 500/595/695 Inlet Hose, a high-performance silicone intake hose specifically designed for the T-JET engine equipped with Garre...

Replacement Filter on Spinning for FMIND5R32 Please watch our video on how to fit an air filter without damaging it.

This front mounting intercooler kit has been designed as an upgrade for the Audi S4 B9 and fits the Audi A4 B9. Offering a huge 128% increase in ...

PLEASE NOTE: This Oil Cooler Kit has been designed for use in conjunction with the Forge Motorsport front mount intercooler (FMINT500). It will not...

Extended wheel bolts are not supplied. Before fitment, please ensure the spacer fits flat to the back of the wheel. Please also test for clearanc...

The Forge Motorsport FMTUBL4 has been specifically designed for the Mini R56 stock turbo charger, and also fits the Peugeot 207/208 GTI. This turbo...

Piston Seal kit for 4 Pot Rear Caliper

A set of marine quality stainless steel hose clamps for the installation of our silicone coolant hose kit for the FMKTTTRS.