F Brand Collection

A set of 6 ultra-high performance brake lines for the Alfa Romeo MiTo 1.4 QV. These are a direct replacement/upgrade for the OEM brake line set and...

This will NOT work with the OEM intercooler. This product will only work with aftermarket intercoolers with an outlet size of 63-67mm (Cold Side). ...

This intake is designed for LHD vehicles and will NOT fit the RHD version. For the RHD, see here. After the success of our Intake system for the ...

32mm Side pipe as used on the following valves: FMBSPLTR    

This oil catch tank kit is for the Toyota Supra A90 and BMW Z4 with the BMW B58 Engine, developed by our in-house development team. Not only is it ...

With modern day aftermarket ECU tuning pushing powerful engines harder. In certain conditions the vehicle will run the risk of receiving inadequate...

A Pair of Forge Motorsport atmospheric valves for Audi RS4 B9 and RS5 F5. This set comprises a pair of our solenoid operated valves together with a...

This is the scoop/duct used for our intake kit on a Mk5 VW Golf R32 and by popular demand it is now available as it's own part!  It mounts perfec...

We recommend servicing your valve every 3 years, or 20,000 miles, whichever comes sooner This Blow Off, or Dump valve, is for the BMW N13 1.6 Tur...

Developed from our direct involvement within the BTCC and Mini Challenge race series where we have provided race proven and championship winning co...

  The Forge range of carbon fibre products are manufactured to the highest standards utilising the absolute best materials available. However, in...

One pair of Forge Motorsport strut top covers, CNC machined from aluminium billet. These will not only improve the appearance of the strut tops b...

Before fitment, please ensure the spacer fits flat to the back of the wheel. Please also test for clearance after fitment at the wheel arch under f...

For the i30N facelift DCT or manual, there will be one hose that does not fit – this is known as the lower radiator hose. In the image above, this ...

This product is ideally fitted in conjunction with the product FMDV1-GTE (1.2/1.4 TSI Dump valve and fitting kit). If purchased as a stand-alone pr...

A replacement cork gasket should you need one. These are the gaskets that come with our BOV kits and fits between the boost take-off block. If yo...

Red Hose available only This Forge Motorsport dump valve discharge pipe is available in red, blue or black and is the perfect complement to the o...

A set of 4 ultra-high performance brake lines for the Toyota Supra MK5 A90. These are a direct replacement/upgrade for the OEM brake line set and r...

Forge designed these silicone hoses so they can withstand pressures that can be experienced on tuned and remapped engines. They will long outlast t...

If you have a 2022 onwards model, you can find the appropriate valve here As the engine does not have a diverter valve fitted as standard, Forge ...

Hose Clamp Kit for FM225CCHA

A plastic Horseshoe clip used in various Forge boost gauge fitting kits, PCV deletes, and valve kits. This is a genuine VAG part that will fit Au...

A 2 piece hose clamp kit for our Silicone N75 Connection Hose for Audi S3 and TT 1.8T These are 2 high performance hose clips, with a cold-formed...

A 12 piece hose clamp kit for our Fiesta ST 180 Boost Hose Kit These are high performance hose clips, with a cold-formed stamped band thread, smo...

This is a replacement high flow, pleated, synthetic nanofiber filtration air filter (an upgrade compared to the more common, cotton filter) for the...

Crankcase breather hose for VW T5 1.9 This hose connects between the cam cover and inlet pipe, designed to fit vehicles with the AXB, AXC and BRS...

The Forge turbo blankets are designed to isolate the radiant heat produced by the turbocharger. Designed by the Forge development team on the Forge...

THIS WILL ONLY FIT 4" INTAKES - THIS WILL NOT FIT THE STOCK AIRBOX. THIS WILL ONLY FIT THE MK3 I30N With Forge leading the way in aftermarket pro...

We recommend servicing your valve every 3 years, or 20,000 miles, whichever comes sooner This recirculating valve is for the Renault and Nissan T...

We recommend servicing your valve every 3 years, or 20,000 miles, whichever comes sooner This Blow Off, or dump valve, is for the Renault and Nis...

Before fitment, please ensure the spacer fits flat to the back of the wheel. Please also test for clearance after fitment at the wheel arch under f...

In order to ensure that you have the correct hose clamps for your hoses, we have put together a full kit, to ensure a perfect fit. These worm drive...

This Forge intake kit is for the VW Up 1.0 TSI and GTI. Our intake kit includes a bespoke aluminium housing, powder coated black for that OEM look ...

This is a replacement Pipercross filter that fits the FMINDK20 intake. These have been created exclusively for Forge by filtration gurus Pipercro...

A replacement high flow performance air filter for our popular FMINDK14 and FMINDK14-GTE induction kits. The filter will also replace the paper e...

This is a replacement Pipercross filter that fits the FMINDK4 and FMIND16 intake. These have been created exclusively for Forge by filtration gur...

Hyundai i30N and Veloster N short shifter and side shifter set. This part has been developed in conjunction with our work on the BTCC championship ...

The solenoid pictured is just for reference and is not included with this product. Only 1 x wiring connector is supplied.  This wiring harness ha...

A set of five boost/intercooler hoses for the Suzuki Swift Sport 1.4 ZC33S, which replace all of the OEM rubber hoses in the boost system. The kit ...

A set of three coolant hoses for the Suzuki Swift Sport 1.4 ZC33S, which replace three of the OEM rubber hoses in the coolant system. The kit consi...

WARNING:  Installation of a boost solenoid is not for the tuning novice. Any boost controller manual or electronic must be fitted with caution. T...

This hoses replaces the OEM Renault pipe, part number: 16 57 542 63R This reinforced silicone intake hose fits the Renault Megane RS 4 280 & ...

The Forge Motorsport high flow inlet hose for the Peugeot 208 GTI face lift model from late 2016 onwards (208bhp EP6-FDTX Euro 6 Engines) replaces ...

The Forge Motorsport intercooler is a perfect performance enhancing product that fits directly to the OEM mounting points making for an easy instal...

We can build a custom wastegate actuator to your exact specifications! Please see the PDF under the 'Fitting Instructions' tab for more information...

A replacement actuator for Garrett Turbo GTX2867R actuator part number 480009. Forge Motorsport were the first company in the world to desi...

HoseTechnik are proud to present a high-performance 4 piece brake line set for the VW UP. These are a direct replacement/upgrade for the OEM brake ...

Before fitment, please ensure the spacer fits flat to the back of the wheel. Please also test for clearance after fitment at the wheel arch under f...