Exhaust Systems

This S-Type Climber Cat-Back™ system (140809) is designed with high ground clearance in mind. It features a brushed T-304 stainless steel turndown ...

For those who have purchased our Axle-Back system or GM Performance Avle-Back and are looking to upgrade with an X-Pipe, here you go. X-Pipes unlea...

EXCEPT Convertible. Recommended only for vehicles with substantial engine upgrades that require a 3" exhaust. System contains a merge X-Pipe for...

BORLA® proudly presents their exhaust systems for the Jeep Gladiator. These Cat-Back™ systems are specifically tuned for flow and sound on the G...

This ATAK® Climber Cat-Back™ system (140810) is designed with high ground clearance in mind. It features a brushed T-304 stainless steel turndow...

EXCEPT Convertible. Recommended only for vehicles with substantial engine upgrades that require a 3" exhaust. System contains a merge X-Pipe for in...

The BORLA Universal Hot Rod Kit includes all the BORLA parts you need to fabricate a custom stainless steel performance exhaust. Perfect for custom...

These over axle pipes are recommended to be used with the BORLA® Axle-Back system and X-Pipe to complete a Cat-Back™ system. Built from premium ...

BORLA® proudly presents their exhaust systems for the Jeep Gladiator. These Cat-Back systems are specifically tuned for flow and sound on the Gladi...

The 140807 Cat-Back system is specifically designed to fit the Mustang GT convertible that is NOT equipped with Active Valve Performance Exhaust. S...

The 140836 Borla® Cat-Back™ system was designed for use on the "High Altitude" and "Summit" Grand Cherokee models equipped with the 3.6L V6 engine....

System contains a merge X-Pipe for increased performance and improved sound. Features bright chrome on T-304 stainless steel tips. BORLA® Cat-Ba...

This performance X-Pipe and Connection Pipe create power while adding a great sound. They will fit vehicles with and without NPP. BORLA® Cat-Bac...

System contains a merge X-Pipe for increased performance and improved sound. Features bright chrome on T-304 stainless steel tips. BORLA® Cat-Back™...

This performance X-Pipe creates power while adding a great sound to the C5 / C5 Z06 Corvette systems. In testing, customers and racers alike notice...

Long Tube Headers:Formed Collectors:4-to-1 formed collectors decrease turbulence and increases exhaust velocity. The result is increased horsepower...

Performance Gains:This system produced gains of up to +13 HP and +14 lbs. x Ft. TQ., as measured on our in-house dyno. 1-5/8" - 3-1/2" 304 Stainl...

Long Tube Headers: Formed Collectors:4-to-1 formed collectors decrease turbulence and increases exhaust velocity. The result is increased horsepowe...

aFe POWER Y-pipe w/ Cat for the 2011-2014 Ford F-150 "Coyote" V8-5.0L. The Y-pipe is made from 409 stainless steel for long life and is mandrel ben...

HeaderFormed Collectors:4-to-1 formed collectors decrease turbulence and increase exhaust velocity. The result is increased horsepower, torque and ...

True Merge Collector:Eliminates dead space that can cause turbulence and hinder flow that formed collectors are prone to produce. Leak-Free Seal:Hi...

True Merge Collector:Eliminates dead space that can cause turbulence and hinder flow that formed collectors are prone to produce. Leak-Free Seal:Hi...

True Merge Collector:Eliminates dead space that can cause turbulence and hinder flow that formed collectors are prone to produce. Leak-Free Seal:Hi...

2-1/4" - 2-1/2" 409 Stainless Steel Construction:This system is constructed of 2-1/4" - 2-1/2" mandrel-bent 409 stainless steel tubing for maximum ...

Larger exhaust tubing means more airflow and dyno-proven power for your Dodge Charger/Challenger 5.7L. Replace the small, restrictive exhaust conne...

2-1/2" 304 Stainless Steel Construction:This system is constructed of 2-1/2" brushed finished 304 stainless steel tubing for maximum strength and d...

Test Results:Added an astounding +32 HP and +44 lbs. x ft. of TQ as verified by our in-house dyno Long Tube Headers:Formed Collectors:4-to-1 formed...

Retains Factory Sensors Mounting Locations:Retains factory sensors for a hassle free installation. These performance connection pipes also include ...

3" - 3-1/2" 409 Stainless Steel Construction:This system is constructed of 3" - 3-1/2" mandrel-bent 409 stainless steel tubing for maximum strength...

aFe POWER Twisted Steel Y-pipe w/ Cat for the Ford F-150 EcoBoost with V6-2.7L twin turbo engine. This performance Y-pipe is constructed out of 3 I...

Tri-Y Design:Paired opposite firing cylinders with specifically tuned primary lengths maximizes scavenging and increases torque throughout the p...

Got lift? This Twisted Steel loop relocation down pipe replaces the factory loop to accommodate most long-arm lift kits without interference. 2" ma...

Dual High-Flow Catalytic Converters:This system utilizes a 200 CPSI (cell per square inch) metallic high flow catalytic converters for maximum flow...

1-3/4" - 3-1/2" 409 Stainless Steel Construction:This system is constructed of 1-3/4" - 3-1/2" mandrel-bent 409 stainless steel tubing for maximum ...

Performance Gains:In-house dyno testing produced gains of up to +29 HP and +33 lbs. x ft. torque. High Flow Catalytic Converters:This system featur...

True Merge Collector:Eliminates dead space that can cause turbulence and hinder flow that formed collectors are prone to produce. Leak-Free Seal:Hi...

aFe is proud to introduce an all new Twisted Steel Connection Pipes for the 2014-2019 Chevrolet Corvette (C7) with V8-6.2L engine. Designed to re...

Long Tube Headers:Formed Collectors:4-to-1 formed collectors decrease turbulence and increases exhaust velocity. The result is increased horsepower...

304 Stainless Steel Tubing:High grade stainless tubing with a uniform brushed finish provides a beautiful look and high resistance to corrosion M...

Mandrel-Bent 304 Stainless Steel Tubing:Mandrel-bent 3" into 3-1/2" 304 stainless steel tubing for improved flow and longevity. True Merge Collec...

3 " 304 Stainless Steel Construction:This system is constructed of 3" mandrel-bent 304 stainless steel tubing for maximum strength and durability...

Performance Gains:This system produced gains of up to +11 HP and +17 lbs. x Ft. TQ., as measured on our in-house dyno. 3" 409 Stainless Steel Const...

aFe is proud to introduce an all new Twisted Steel Exhaust Loop Relocation Pipe for the 2012-2018 Jeep Wrangler (JK) 2/4-Door with the V6-3.6L engi...

aFe POWER Twisted Steel Long Tube Headers and Y-Pipe Combo are built to produce power. These full length headers and y-pipe combo offer up to +20 H...

High Flow Catalytic Converters:Dual 400 CPSI catalytic converters are used for maximum flow. Massive Y-pipe:The unique 3-piece y-pipe is designed...

Massive Y-pipe:The massive y-pipe is designed using a merge collector that utilizes a 2-1/2 IN to 3 IN transition for optimum flow while removing t...

This Twisted Steel Y-Pipe includes dual high flow catalytic converters allowing your HEMI to breathe, unleashing more power and sound. It utilizes ...

Tri-Y Design:Paired opposite firing cylinders with equal, specifically tuned primary lengths maximizes scavenging and increases torque throughout t...