Exhaust Flanges, Gaskets & Accessories

2.75" Flex section. Stainless Steel Reinforcement Braided Outside. 4" Length. High Quality unit for downpipe and exhaust use.No Inner Braid for hig...

2.75 inch Stainless V-Band Flange and Clamp Set. Flanges are "male" and "female" stepped lip matching set.To Be used to make a nice V-Band connecti...

Stainless steel lower downpipe flange. Can be used with ATP-FOC-005 to make a new full 3" downpipe. Has the proper bolt spacing to meet with stock ...

Stainless Steel 3.00" diameter, 180 Degree Mandrel Bent Elbow, 4.5" Center Line Radius, with 6" legs

3" Flex section. Stainless Steel Reinforcement Braided Outside. 4" Length. High Quality unit for downpipe and exhaust use.No Inner Braid for higher...

3" Flex section. Stainless Steel Reinforcement Outside Braided. 6" Length. High Quality unit for downpipe and exhaust use.No Inner Braid for higher...

Flex Section, Braided, SS, 3" diam x 8" long

Formed transition tube. 3" round to oval. Works great with ATP-FLS-088 or any othe downpipe application requiring an oval transition in a short dis...

3" Stainless 2 bolt Downpipe flange, Mustang Ecoboost 2.3L Turbo

Modular V-Band - 3.00" High Flow Catalytic Converter - High Flow 3" Stainless cat assembly with 3" Vband TIG welded to both ends. Adapts and bolts ...

3 Flex section. Stainless Steel reinforced Outer Braided. 6.00" Length. High Quality unit for downpipe and exhaust use.No Inner Braid for higher vo...

CNC machined discharge flange. Mild steel. Made fr stock turbo on all Mazdaspeed 3 and Mazdaspeed 6.

CNC mild steel machined discharge flange for stock turbo on FWD/AWD 2.0FSI/TSI Golf/Jetta/A3/S3/TT

Downpipe Flange, Diamond Shaped 4 Bolt Pattern, stainless, 2.5" and 1.75" divorce ports

EGT BUNG, 304 Stainless, 1/8" NPT, for welding onto manifold/header/downpipe for EGT Probe.

Gasket, 3 bolt, 3 inch, Generic To be used with the generic 3", 3 bolt flange - New, all metal.

Flange, Discharge from SRT-4 , CNC Machined, Mild Steel 3/8", Downpipe use, on turbo side after 02 housing, 3" Opening.

Flange, adapter, vacuum source block for 2015+ 2.3L Ecoboost MustangEasy one bolt piggyback installation into MAP sensor at intake manifold and pro...

CNC'd steel external wastegate weld flange. Designed for Turbonetics Deltagate or Tial 38mm external wastegate. Perfect for dump tubes. Mounting ho...

(1)Wastegate weld flange. Designed for Tial 38mm external wastegate (or other compatible gates such as Turbonetics, Turbosmart, etc.). Perfect for ...

Stainless steel inlet/outlet weld flange for Tial 46mm wastegate. Flange only, does not come with the gasket.

T6 undivided turbine inlet flange. Larger rectangular bolt pattern with 4.5" and 2.75" center to center bolt patterns. Bolt pattern is also found o...

4" stainless v-band (actually 4.21" OD Marmon)(106.9mm) downpipe flange for the Borg Warner S SX SX-E S200/S300 series turbos. Includes heavy duty ...

Gasket for turbo cat or race pipe on 1.8T engine found on 1996 to 2005 VW Passat and Audi A4 with stock location turbo with KKK flange.

5 bolt gasket Garrett T25 flanged turbine housings. For Garrett turbos such as GT25R, GT28R, GT28RS, GT2871R, GT3071R-WG, GT3076R-WG.

T25/GT25/T28 Inlet Gasket, Stainless Steel

T3 Turbine inlet gasket, divided

Gasket, T4 ( T04 ) Turbine Outlet (4 Bolt round) - Common on "On Center" Housings

Stainless steel T4 divided turbine inlet gasket.

Steel T04 turbine inlet gasket. Can be used on all T04 turbochargers.

Gasket, T6, Turbine Inlet, Divided

Gasket, T6, Undivided, Turbine Inlet

Flange Adapter Kit, mounts Greddy RS BOV into stock diverter location on FWD 2.0T FSI engine. Includes specially 3D machined mounting adapter and s...

Metal gasket for turbo to up-pipe for 2002-2012 WRX/STI Turbo (all non-twinscroll).

Gasket for oil drain (oil return) flange. Large width drain flange version.** One gasket for each quantity unit **PRODUCT COMPATIBILITY: GT47/GTX4...

Oil drain return flange gasket for Garrett GTW Series turbochargers. Compatible with oil drain flange Product Code: ATP-FLA-042PRODUCT CONTENT: On...

Oil inlet feed flange gasket for Garrett GTW journal bearing turbochargers. Compatible with oil feed flange Product Code: ATP-FLA-041.PRODUCT CONTE...

Set of replacement bolts, washers, gasket for ATP High Flow Manifold stock location 1.8T. Includes turbo to manifold gasket, 3 bolts special length...

Short Transition (Formed) stainless 3.5" OD to 4" OD, overall length 1.25" (32mm) no flange attached for welding to both sides, 89mm to 102mm

Short Transition (Formed) stainless 4" OD to 5" OD, overall length 1.8" (45mm) no flange attached for welding to both sides, 102mm to 127mm

Transition 2.5 to 3" (63mm to 76mm) for weld to, Stainless Steel 304, 2.5" OD to 3" OD, Overall Length 1"

Stainless tube cradle for 3" piping - to be Used with Hanger BracketsStainless sheetmetal with double bend to mate to the OD of a 3" Tube to build ...

CNC Machined 5 bolt (ford style) Welding flange for T3 turbine with External wastegate use. The inner diameter of the circle is 2.5" and has a step...

GReddy Type S/R Modular Weld-On Flange Kit. Includes weld-on steel section and twist on top flange (reusable)

CNC machined discharge for GT25R/GT28R/GT28RS/GT2871R and T25/28, designed with both bolt patterns, with groove for 3.00" oval tube.

Gasket - T25, non-ball bearing turbo, drain flange. Journal bearing T25 flanged turbo requires a special gasket because the bolt spacing on the fla...

Inlet mounting flange and clamp kit for Tial QRJ Blow Off Valve (BOV).Tial Part number: 004809PRODUCT CONTENTS: Aluminum weld flange Threaded V-ba...

Inlet mounting flange and clamp kit for Tial QRJ Blow Off Valve (BOV).Tial Part number: 004809PRODUCT CONTENTS: Stainless weld flange Threaded V-b...