Easter Sale Up To 10% Off Brands

Banjo fitting kit for coolant (water) ports on Garrett ball bearing GT25, GT28, GTX28, GTX29, GT30, GTX30, GT35 and GTX35 series turbochargers. Als...

Weld bung, aluminum, -10 an male flare, has appropriate bore throughout and seat in the back end for weld bead. Perfect for oil drain (at engine bl...

Fitting, Swivel, -10 AN Flare, Male to Female, 45 Degree, Converts Straight -10 hose end to 45D while extending the line a bit. Very convenient.

Union, 2 way male flare, -6 AN/JIC male, use to join two steel braided coolant or other -6 AN lines.Use this part to join two -6 size oil feed line...

Union, 2 way male flare, -10 AN/JIC male, use to join two steel braided oil drain or other -10 AN lines.Use this part to join two -10 size oil feed...

Fitting, Swivel, -6 AN Flare, Male to Female, 45 Degree, Converts Straight -6 hose end to 45D.

Metric 10mm (1.25 pitch) to -4 AN flare fitting. Common thread on Nissan uses this assembly. Sealing washer is included on metric side.

Metric 10mm (1.00 pitch) to -4 AN flare fitting. Common thread on Nissan uses this assembly. Sealing washer is included on metric side.

Metric 10mm (1.50 pitch) to -4 AN flare fitting. Common thread on Nissan uses this assembly. Sealing washer is included on metric side.

Fitting, Metric 10mm (1.5 pitch) to -4 AN Flare. Sealing washer included on metric side.

1/4" inverted flare to 3AN male to male fitting. Unrestricted version of ATP-OIL-021 but for -3 oil feed line input. Appropriate for ball bearing o...

Banjo Bolt for low profile oil feed line on GT and GTX Ball Bearing turbochargers. Optional (not required) 3 crush washers.CRUSH WASHERS ARE NOT IN...

End Cap -4 AN/JIC, Caps off a -4 (#4) male. Product Notes ** 1 End Cap sold per unit **

Tee Fitting, 3 way flare male size -4 AN/JIC, for teeing in an oil pressure gauge or temp gauge.

Adapter -4AN male flare to 1/8" BSP male for oil adapter on British oil fittings to AN/JIC -4 flare.

Rod Extension kit for internal wastegate actuator, (1)coupler, (2) nuts, (1) threaded rod 2" long.

1/2" NPT FEMALE WELD BUNG FOR OIL PAN, SPECIFY STEEL OR ALUMINUM

Steel braided Hose, -6 AN, for use as coolant line or oil line, 24 inches long. -6AN Straight Hose End and -6AN Straight Hose End.PRODUCT CONTENT: ...

Steel braided Hose, -6 AN, for use as coolant line or oil line, 6 inches long. -6AN Straight Hose End and -6AN Straight Hose End.PRODUCT CONTENT: ...

Steel braided Hose, -6 AN, for use as coolant line or oil line, 12 inches long.HOSE END OPTIONS: -6AN Straight Hose End and -6AN Straight Hose End...

Fitting, 1/4" NPT to 6AN Flare, Male to Male, 45 deg Adapter

Fitting, 1/4" NPT to 6AN Flare, Male to Male, Straight Adapter.

Fitting, Male to Male, Metric 16mm (1.5pitch) x 6AN Flare, With sealing Washer. Provides easy way to connect to steel braided type lines with #6 AN...

Banjo Only - 14mm Aluminum For coolant connections on GT25R/GT28R/GT30R/GT35R Turbochargers. 14mm banjo to 1/4" NPT - Very flexible when used with ...

1/4" Barb to 1/8" NPT straight female fitting.

End plug, -6 AN/JIC male plug. Used to terminate and close off the end of a -6 AN/JIC coolant line

End Cap, -3 AN/JIC, Caps off a -3 (#3) male

Steel braided Hose (with a 14mm Banjo hose end and a -6AN straight hose end), -6 AN, for use as a coolant line or oil line, 24 inches long. 14mm Ba...

Steel braided Hose (with a 14mm Banjo hose end and a -6AN straight hose end), -6 AN, for use as a coolant line or oil line, 18 inches long. 14mm Ba...

Steel braided Hose (with a 90 Degree hose end and a straight hose end), -6 AN, for use as a coolant line or oil line, 8 inches long. -6AN 90 Degree...

Steel braided Hose (with a 90 Degree hose end and a straight hose end), -6 AN, for use as a coolant line or oil line, 10 inches long. -6AN 90 Degre...

Steel braided Hose (with a 90 Degree hose end and a straight hose end), -6 AN, for use as a coolant line or oil line, 24 inches long. -6AN 90 Degre...

Steel braided Hose (with a 90 Degree hose end and a straight hose end), -6 AN, for use as a coolant line or oil line, 18 inches long. -6AN 90 Degre...

Steel braided Hose (with a 90 Degree hose end and a straight hose end), -6 AN, for use as a coolant line or oil line, 12 inches long. -6AN 90 Degre...

Steel braided Hose, -6 AN, for use as a coolant line or oil line, 18 inches long. -6AN Straight Hose End and -6AN Straight Hose End.PRODUCT CONTENT...

-4AN 3 way tee fitting.Includes two male -4AN fitting ends and one female -4AN fitting end.

End Cap -10 AN/JIC, Caps off a -10 (#10) male Product Notes ** 1 End Cap sold per unit **

End Cap -6 AN/JIC, Caps off a -6 (#6) male Product Notes ** 1 End Cap sold per unit **

Banjo Bolt, M12 x 1.25 Thread Pitch

STEEL Banjo fitting, 14mm hole (for 14mm bolt) with -6 AN male flare.

Steel Banjo fitting, 12mm hole (for 12mm bolt) with -6 AN male flare.

1/8" NPT Female to -4AN Flare Male Straight Adapter.

Banjo fitting kit including LONG aluminum banjo; for coolant (water) ports on Garrett ball bearing GT25, GT28, GTX28, GTX29, GT30, GTX30, GT35 and ...

Banjo Fitting 14mm (LONG ALUM VERSION) with -6 AN Male Flare. Overall length 3 inches.

Fitting, 1/4" (6mm) pushlock barb to 1/4" pushlock barb. Used to join two coolant or fuel lines (pushlock style or regular rubber/silicone hose).

Fitting, 5/16" (8mm) pushlock barb to 5/16" pushlock barb. Used to join two coolant or fuel lines (pushlock style or regular rubber/silicone hose).

Fitting, 3/8" (10mm) pushlock barb to 3/8" pushlock barb. Used to join two coolant or fuel lines (pushlock style or regular rubber/silicone hose).

Straight 3/8" NPT to -4 AN