Easter Sale New Brands Added

3.50" T-Bolt Clamp. For 3.25" pipe connections to compensate for silicone connector.

3.25" T-Bolt Clamp. For 3" pipe connections to compensate for silicone connector.

2.75" T-Bolt Clamp. For 2.5" pipe connections to compensate for silicone connector.

2.50" T-Bolt Clamp. For 2.25" pipe connections to compensate for silicone connector.

2.25" T-Bolt Clamp. For 2" pipe connections to compensate for silicone connector.

2" T-Bolt Clamp. For 2" pipe connections to compensate for silicone connector.

V-band Clamp, Compressor housing to CHRA, GT42

Turbine housing to CHRA V-Band Clamp. Compatible with Garrett GT42, GTX42, GT45, and GTX45 series turbochargers. Compatible with Garrett and TiAL t...

Alternate v-band clamp for the Garrett GTX84RS (aka GTX3584RS) compressor housing with a v-band outlet flange.Matching v-band flange for charge-pip...

Rubber insert sleeve. High temp steps 2.75" OD pipe up to 3" OD. For intake use only. No pressure.

90 degree elbow. 2.0" on both ends. Regular radius. High temp rubber.

90 degree elbow. 2.5" on both ends. Tight radius. High temp rubber.

90 degree elbow. 2.5" on both ends. Regular radius. High temp rubber.

Perf foot, 3/8" re-inforced black rubber hose, high temp, for coolant, fuel, or oil, pushlock type 3/8", compatible with all 3/8" barb and 3/8" pus...

90 Degree regular radius Elbow - 4.0" to 4.0", Hi temp rubber, excellent for turbo inlet use.

90 Degree regular radius Elbow - 3.5" to 3.5", Hi temp rubber, excellent for turbo inlet use.

90 Degree regular radius Elbow - 3.0" to 3", Hi temp rubber, excellent for turbo inlet use.

(1) Bolt, allen head, 8mm x 1.25 pitch/6mm allen head

10mm x 1.5 thread pitch stud standard stud length is 36mm optional "longer length stud" is 57mm

8mm (1.25pitch) Stud, .5 x 1.25 x 2.00 Common 8mm exhaust stud with 1.25 thread pitch. .5 before .25 shank, and 1.25 thread.

Rear of cat (or cat delete) to downpipe on 1.8T engine found on 1996 to 2005 VW Passat and Audi A4 with stock location turbo with KKK flange.

Gasket for turbo to downpipe on 2.0T FSI equipped engine. 2006-2008, Golf/Jetta/GTI/Passat. For stock location turbo/manifold with stock K03. 4 ear...

O-ring for inlet compressor adapter used in part number ATP-FLA-012

O-Ring (4.530 x 0.067) Garrett Part Number 403069-0060 APPLICABLE GARRETT PART NUMBER: 403069-0060

O-Ring between GT42, GT42R, and GT42RS Compressor Outlet V-Band Flanges. V-band Flanges and Clamp Set part #ATP-FLS-055

O-ring, seal, at mounting Flange, Tial BOV, models 50mm, Tial Q, Tial QR

Gasket, 3 bolt, 3 inch, Generic To be used with the generic 3", 3 bolt flange - New, all metal.

Gasket, 2 BOLT, Same bolt pattern as generic 3 Inch Flange and has elongated holes to fit many similar 2 bolt flanges. sturdy metal gasket.

RUBBER O-RING USED ON ADAPTER RING P/N: ATP-FLA-011

O-ring (seal), goes between CHRA and backplate Adapter, all GT25 through GTX35

O-Ring for Bosch Fuel Injectors, Top or Bottom O-Ring

18mm Copper crush Washer (gasket) for oil or coolant seal

16mm Copper crush Washer (gasket) for oil or coolant seal

12mm Copper crush Washer (gasket) for oil or coolant seal

10mm Copper crush Washer (gasket) for oil or coolant seal

7/16 diameter Copper crush Washer (gasket) for OIL FEED PORT GT GTX G SeriesVery common part used on the oil feed port when using a banjo type fitt...

Gasket, Oil inlet/outlet GT12 (aka GT1241) & GT06

Gasket with crush ring seal for Garrett v-band exit (downpipe side flange) on Garrett G-series G25, G30, G35 v-band turbine housing with a 90mm OD ...

Gasket with crush ring seal for Garrett v-band entry (manifold side flange) on GT30/GTX30, GT35/GTX35 v-band turbine housing with a 76mm OD (outer ...

Gasket with crush ring seal for TiAL v-band exit (downpipe side flange) on GT28/GTX28, GT30/GTX30, GT35/GTX35 v-band TiAL turbine housing with a 90...

Gasket with crush ring seal for Garrett v-band exit (downpipe side flange) on GT30/GTX30, GT35/GTX35 v-band turbine housing with a 90mm OD (outer d...

T3 outlet Gasket (for Internally Wastegated T3 turbo that has the 5 bolt to 3 bolt internal wastegate valve bolted up to it). Goes between swingval...

Gasket with crush ring seal for Garrett v-band entry (manifold side flange) on Garrett G-series G25, G30, G35 v-band turbine housing with a 76mm OD...

Gasket with crush ring seal for TiAL v-band entry (manifold side flange) on GT28/GTX28, GT30/GTX30, GT35/GTX35 v-band TiAL turbine housing with a 7...

45 Degree elbow - 4.0" to 4.0". High temp rubber. Excellent for turbo inlet use.

Details: 45 Degree Elbow 3.0" to 3.0" High Temp Rubber Excellent for turbo inlet use.

45 Degree elbow - 3.5" to 3.5". High temp rubber. Excellent for turbo inlet use.