Easter Sale New Brands Added

Garrett Undivided V-band inlet & outlet turbine housing in Ni-Resist material; for GT30 and GTX30 series turbochargers. The turbine housing is...

Garrett Undivided V-band inlet & outlet turbine housing in Ni-Resist material; for GT30 and GTX30 series turbochargers. The turbine housing...

Garrett Undivided V-band inlet & outlet turbine housing in Ni-Resist material; for GT30 and GTX30 series turbochargers. The turbine housing is...

Garrett divided V-band inlet & outlet turbine housing in Ni-Resist material; for GT30 and GTX30 series turbochargers. The turbine housing is ....

Garrett divided V-band inlet & outlet turbine housing in Ni-Resist material; for GT30 and GTX30 series turbochargers. The turbine housing is ....

Garrett divided V-band inlet & outlet turbine housing in Ni-Resist material; for GT30 and GTX30 series turbochargers. The turbine housing is 1....

Garrett V-band Entry & Ni-Resist Turbine housing or GTX reverse rotation GTX30 models. The turbine housing is 1.01 A/R and 3 inch V-Band outlet...

Housing, Tial, V-band inlet and outlet, GT30/GTX30, .63 A/R

Garrett turbine housing. V-Band entry (same as Tial inlet) GT28, 5-bolt exit. Externally wastgated (Tial V44mm). 72 A/R. Fits GT/GTX28RS/GT2871R/GT...

.82 A/R T3 Divided (Twin-Scroll) turbine housing for 60mm turbine wheel Garrett GT30R, GTX30R, and GEN2 GTX30 series models. Alternate fitment opti...

Garrett GT28/GTX28 T3 undivided .82 A/R turbine housing with welded 3" GT v-band (81mm center ring) 90mm OD flange.

Garrett GT28/GTX28 T3 undivided .63 A/R turbine housing with welded 3" GT v-band (81mm center ring) 90mm OD flange.

T3 .48 A/R Turbine Housing GT28 / GTX28 3" GT V-Band Exit w/81mm Lip at the downpipe flange.Fits turbine wheel found on GT28RS, GT2876R (GT25/40R) ...

Add-on service operation to ATP-HSG-041.Converts the the smaller "T31 V-band" outlet (3.1" OD)flange to the 3" GTVB outlet flange (3.55" / 92mm OD)...

TiAl Stainless turbine housing with T3 Inlet Open (undivided), GT 3" V-Band Outlet w/90mm (3.55”) OD and 81mm centering ring groove, .63 A/R turbin...

Housing, Tial, V-band inlet and outlet, GT30/GTX30, GT3071R/GTX3071R, GT3076R/GTX3076R, GT3082R, .82 A/R

Housing, Tial, V-band inlet and outlet, GT30/GTX30, 1.06A/R

Turbine Housing, K26 flanged in and out for Audi 5 Cylinder K24/K26 direct replacement, 4 bolt outlet GT28, .82 A/R, Fits GT28RS, GT2871R, and GT28...

Turbine Housing, K26 flanged in and out for Audi 5 Cylinder K24/K26 direct replacement, 4 bolt outlet GT28 .63 A/R, Fits GT28RS, GT2871R, GT2876R, ...

Housing, Tial, V-band inlet and outlet, GT28/GTX28, .86 A/R

Housing, Tial, V-band , GT28/GTX28, .64 A/R

T31 (T3) turbine housing with 4 bolt outlet. Fits turbine wheel found on GT28RS, GT2876R (GT25/40R) and all GT2871R turbos. Turbine housing A/R is ...

Garrett T25 inlet and 5 bolt GT28 style outlet turbine housing. Internally gated.Available for Garrett series GT25, GT28, GTX28, GTX29, and GT30R-W...

(1) Banjo fitting, 10mm to 4AN flare, universal use.

-3AN (Flare) Female to -4AN (Flare) Male. Used to convert -3AN Male to -4AN Male.

(1) -4AN (Flare) Female to -3AN (Flare) Male. Used to convert a -4AN Male to -3AN Male.

Fitting, Swivel, #4AN Flare, Male to Female, 90 Degree, Converts Straight #4 hose end to 90D. Good for getting around tight spots and if you're stu...

Union 2 way male flare. -4AN/JIC male. Use this part to join two -4 size oil feed lines into one long line.

Steel braided Oil Feed Line(12mm Banjo & Straight Ends) -4 AN for oil supply,2 foot long /24" inches.

Steel braided Oil Feed Line (12mm Banjo & Straight Ends), -4 AN, for oil supply, 18" length.

Steel braided Oil Feed Line (12mm Banjo & Straight Ends), -4 AN, for oil supply,1 foot long (12" length).

Oil Feed Line -4 size - SS Braid 20 inches. Stainless Steel Braided high temp line with AN/JIC swivel ends precrimped. High Pressure tight.

Special combo 45 degree tight turn elbow oil drain flange for the T3/T4 GT/GTX40-45.

Double Banjo Fitting, 14 mm Banjo to dual 6AN. Simplifies dual feed install jobs and prevents having to use messy tees.

Double Banjo Fitting, 12 mm Banjo to dual 4AN. Simplifies dual feed install jobs and prevents having to use messy tees.

Double Banjo Fitting, 10 mm Banjo to dual 4AN. Simplifies dual feed install jobs and prevents having to use messy tees.

Double Banjo Fitting, 10 mm Banjo to dual 3AN. Simplifies dual feed install jobs and prevents having to use messy tees.

-03 Oil Feed Line, Braided Steel Line With female (flare/JIC/AN) swivel ends (one straight and one 90 end), -3 size, 16 INCHES long.

Oil feed line kit (-4AN braided steel line and hose end fittings) for VW VR6.PRODUCT CONTENTS: (1 unit) 5 foot oil feed line (-4AN steel braided) ...

Price based on 150mm length - contact us for pricing on other lengths Custom #4 (-4AN) steel braided line including hose ends.Select a specific li...

-03 Oil Feed Line, Braided Steel Line With female (flare/JIC/AN) swivel ends (one straight and one 90 end), -3 size, 48 INCHES long.

-03 Oil Feed Line, Braided Steel Line With female (flare/JIC/AN) swivel ends (one straight and one 90 end), -3 size, 36 INCHES long.

-03 Oil Feed Line, Braided Steel Line With female (flare/JIC/AN) swivel ends (one straight and one 90 end), -3 size, 24 INCHES long.

-03 Oil Feed Line, Braided Steel Line With female (flare/JIC/AN) swivel ends (one straight and one 90 end), -3 size, 18 INCHES long.

-03 Oil Feed Line, Braided Steel Line With female (flare/JIC/AN) swivel ends (one straight and one 90 end), -3 size, 12 INCHES long.

-3AN stainless steel (high pressure) braided line. Five feet in length and includes pre-crimped -3AN swivel hose ends (1x 90 degree fitting and 1x ...

-3AN stainless steel (high pressure) braided line. Four feet in length and includes pre-crimped -3AN swivel hose ends (1x 90 degree fitting and 1x ...

-3AN stainless steel (high pressure) braided line. Three feet in length and includes pre-crimped -3AN swivel hose ends (1x 90 degree fitting and 1x...