Easter Sale New Brands Added

90 Degree Transition Elbow - 3.0" to 4" - Hi Temp Rubber. This product is not silicone, but will work very well for the inlet side of the turbo.

3" Flex section. Stainless Steel Reinforcement Outside Braided. 6" Length. High Quality unit for downpipe and exhaust use.No Inner Braid for higher...

2.25" Flex section. Stainless Steel Braided. 6.00" Length. Hi Quality unit for downpipe and exhaust use.

Prefabbed 4" starter downpipe/up-pipe for the v-band outlet on the G25 G30 G35 series turbos. 100% 304 Stainless Steel and TIG welded construction....

Universal stainless dumptube flanged for MVR (V-Banded 44mm) wastegate outlet. 90 degree bend out of flange with 5" leg.

Universal stainless dumptube flanged for MVR (V-Band 44mm) wastegate outlet. 45 degree bend out of flange with 5" leg.

(1)Cast Aluminum Elbow with nice tight radius but high flow path. 3" OD great for welding onto turbo compressor or intercooler inlet/outlet where s...

Transition Connector of 3" to 3.5" inner diameter x 3." Length, Re-inforced 3-4 ply material.

Transition Connector of 2.00" to 3.00" inner diameter x 3.00" Length, Re-inforced 3-4 ply material.

Transition Connector of 2.00" to 2.50" inner diameter x 3.00" Length, Re-inforced 3-4 ply material.

304 Grade Stainless Steel 2.50" Diameter. Price for (1) 2-foot section

135 Degree Turbo Silicone Elbow, 2" ID. High temp wrapped 4 ply silicone for high pressure turbo applications. Choose from black, blue, or red colors.

90 Degree Silicone Elbow 2.00" inner Diameter. Re-inforced 3 or 4 Ply Material.

MVS 38mm wastegate elbow. 100% 304 stainless. Flanged for Tial V-Banded 38 (MVS) wastegate. Built from heavy duty stainless flanges and thick-wall ...

Electrical connector plug for GM IAT (Intake Air Temp) sensor. Standard GM 2 wire weatherproof plug used on many ECU systems including standalone E...

-3 (-3AN) Size oil inlet restrictor fitting (0.035" orifice / hole size) for Garrett GT and GTX Ball Bearing Turbochargers. Output is -3AN male fla...

T3 Turbine inlet gasket, divided

Set of replacement bolts, washers, gasket for ATP High Flow Manifold stock location 1.8T. Includes turbo to manifold gasket, 3 bolts special length...

EVO8 Oil Feed adapter, Cyl Head to -4 Male AN Flair. Adapter goes from proprietary Metric thread on cylinder head to -4 AN Male. Allows any of our ...

OEM Nissan Silvia S15 SR20DET ball Bearing T28 Turbo, Nissan P/N: 14411-91F00. 310 HP capable. Excellent responding turbo for 4 cylinder applicatio...

10mm Extreme Nord Lock Style Washer - Steel, M10 (also for 3/8" size bolts)Nord Lock type washers allow for more traction between the nut (or head ...

High flow compressor 3" inlet elbow for Evo 8/9 (Evo 4-9) turbo. Light but rigid aluminum, replaces stock restrictive rubber hose. Compatible with...

Blow off Valve adapter, to easily mount the HKS SSQ BOV to Mazdaspeed 3/6 stock location Top Mounted Intercooler. MPS Blow off valve adapter

V-band module for Mazdaspeed stock turbo. Bolts to stock turbo and converts to standard 3" Vband flange. Nice formed stainless transition for smoot...

Mazdaspeed externally wastegated turbine housing for Garrett GT and GTX series turbochargers; and flanged for TiAL MVS wastegate. The turbine housi...

Oil feed line assembly for GT or GTX on the Mazdaspeed 3/6 Turbo Engine. Steel braided oil feed line kit with fitting/restrictor for the GT/GTX tur...

PRODUCT DESCRIPTION:Hobbs Switch.Positive boost pressure (PSI) activated switch with adjustable boost level trigger.Commonly used to automatically...

Oil Feed Line -4 size - SS Braid 1 Ft. (12 inches) Stainless Steel Braided high temp line with AN/JIC swivel ends precrimped. High Pressure tight.

Fitting, Male to Male, Metric 14mm (1.5pitch) x 6AN Flare, With sealing Washer. Provides easy way to connect to steel braided type lines with #6 AN...

Subaru WRX STI RHD (right hand drive chassis) External Wastegate Adapter for ATP Turbo stock location upgrade Garrett turbochargers. Compatible wi...

Garrett mechanical boost gauge kit. Measures vacuum (in HG) and boost pressure (in PSI); operating range from 30 HG vacuum to 30PSI of boost pressu...

304 Grade Stainless Steel 3.00" outer diameter, 90 Degree Mandrel Bent Elbow, Tight 3" Center Line Radius, with 5" legs. 304 Grade SS.

18mm Banjo Fitting Kit, Banjo to -6 AN flare male, M18 x 1.5, Long Nose AN61 Unit Includes:QTY 1 - 18mm Banjo Fitting - 18mm to -6 AN MaleQTY 1 - 1...

Steel T3 turbine inlet gasket. Can be used on T3 or T3/T4 turbochargers. Stainless Steel

PRODUCT DESCRIPTION:4AN stainless steel (high pressure) braided line. Three feet in length and includes pre-crimped -4AN swivel hose ends (1x 90 d...

Heavy duty stainless steel V-Band clamp for 3.00" Garrett GT V-band outlet (down-pipe) flanged turbine housings. Constructed from stainless steel m...

Banjo fitting kit including SHORT steel banjo; for coolant (water) ports on Garrett ball bearing GT25, GT28, GTX28, GTX29, GT30, GTX30, GT35 and GT...

'-4 (-4AN) Size oil inlet restrictor fitting (0.035" orifice / hole size) for Garrett GT and GTX Ball Bearing Turbochargers. Output is -4AN male fl...

Set includes: (2) 3" V-Band Flanges (MILD STEEL) (3.75 OD Flanges / Grooved for 3" Tube)(1) Heavy Duty V-Band Clamp (stainless)Please refer to prod...

OEM NEW CHRA for Garrett manufactured factory stock BMW turbochargers for 2010 to 2013 BMW X5M/ X6M with the S63 engine. 1 CHRA is required to repl...

Billet machined plug kit with silicone hose and clamps. Plugs 1 of the diverter return ports on the inlet pipe. Need two of these for two turbos on...

5" V-band Stainless DOWNPIPE SIDE Flange and Clamp SET for T6 Turbine Housing GT47/GTX47 GTX50 GTX55

Set includes:(2) 3" V-Band Flanges (STAINLESS STEEL) (3.75 OD Flanges / Grooved for 3" Tube)(1) Heavy Duty V-Band Clamp (stainless)

Aluminum Weld Flange for Tial BOV, models 50mm, Tial Q, Tial QR. Flange only. Does not include clamp.

3.0 Inch V-Band Flange for MK7 Golf GTI 2.0T Down-pipe. Made from stainless steel.Compatible with the stock turbocharger outlet flange, stock V-ban...

Please note regarding the finish: ONLY POWDER COATED BLACK FINISH IS CURRENTLY AVAILABLE **ATP 3" Inlet pipe Eliminator2 (E2)Series, works on all t...

Stainless 3" downpipe weld flange with a protruded lip and 81mm diameter centering ring.Designed for all Garrett turbine housings with a "GT" 3 Inc...

450HP 98-05 VW 1.8T GTX2971R Eliminator Hardware Kit. Fits all Quattro 1.8T S3/TT, does not fit FWD Models.This unit is uniquely built to drop righ...