Easter Sale Exhaust

Replacement Bolt and Nut for TiAL wastegate V-band clamp. V-band clamp not included.PRODUCT CONTENTS: (1 Unit) Bolt (1 Unit) Nut

Clamp, Tial 60mm / Tial V60 Outlet

Clamp, Tial 60mm / Tial V60 Inlet

Alternate Stainless V-band Clamp, Turbine (downpipe side) OUTLET for Tial V-Band Housing on GT/GTX42 and GT/GTX45.

V-band clamp GT55 GTX55 (all versions)connect Turbine housing to CHRA

V-band clamp GT47 GTX47 GTX50 (all versions) connect Turbine housing to CHRA

V-band clamp, GT55 GTX55 (all versions) to connect compressor housing to CHRA

V-band clamp, GT50 GTX50 (all versions) to connect compressor housing to CHRA.

V-band clamp, GT45 GTX45 (all versions) to connect compressor housing to CHRA to CHRA

V-band clamp, GT47 GTX47 (all versions) to connect compressor housing to CHRA

Stainless steel V-Band turbine housing inlet flange (exhaust / turbo manifold side) for Garrett G Series Small Frame Models (G25-550, G25-660, G30-...

V-Band Clamp, Tial BOV, models 50mm, Tial Q, Tial QR

Tial 44mm / Tial MVR Wastegate Outlet Clamp

Tial 44mm / Tial MVR Wastegate Inlet Clamp

Tial V-banded 38mm MVS (V38) Wastegate Outlet Clamp

Tial V-banded 38mm MVS (V38) Wastegate Inlet Clamp

TiAL Stainless steel V-band Clamp for turbine housing outlet (down-pipe side) flange. Compatible with TiAL turbine housings for Garrett GT55 series...

Tial Stainless V-band Clamp, Turbine (downpipe side) OUTLET for Tial V-Band Housing on GT/GTX42 and GT/GTX45

Tial Stainless V-band Clamp, Turbine (downpipe side) OUTLET for Tial V-Band Housing on GT/GTX28, GT/GTX30 and GT/GTX35 series. Tial code VC355

Tial Stainless V-band Clamp, Turbine inlet (manifold side) for Tial V-Band Housing on GT/GTX28, GT/GTX30 and GT/GTX35 series. Tial code VC300

Gasket for turbo to downpipe on 2.0T FSI equipped engine. 2006-2008, Golf/Jetta/GTI/Passat. For stock location turbo/manifold with stock K03. 4 ear...

O-Ring between GT42, GT42R, and GT42RS Compressor Outlet V-Band Flanges. V-band Flanges and Clamp Set part #ATP-FLS-055

Prefabbed 4" starter downpipe/up-pipe for the 4.21" Marmon outlet on the Borg Warner S200 S300 SX SX-E series turbos. 100% 304 Stainless Steel and ...

Prefabbed 4" starter downpipe/up-pipe for the v-band outlet on the G25 G30 G35 series turbos. 100% 304 Stainless Steel and TIG welded construction....

Specify Your length dump tube built to order (between 4" to 14" tube length) Straight, Universal stainless dumptube flanged for MVS (V-Band 38mm) w...

Specify Your length dump tube built to order (between 4" to 14" tube length) Straight, Universal stainless dumptube flanged for MVR (V-Band 44mm) w...

Universal stainless dumptube flanged for MVR (V-Banded 44mm) wastegate outlet. 90 degree bend out of flange with 5" leg.

Universal stainless dumptube flanged for MVR (V-Band 44mm) wastegate outlet. 45 degree bend out of flange with 5" leg.

Low profile version of the ATP-FLS-131 - MVS 44mm wastegate elbow. 100% 304 stainless. Flanged for Tial V-Banded Tial 44mm or MV-R wastegate. Allow...

Modular V-Band Pipe - 3.00" 90 Degree (Long Leg) - 90 Degree Stainless mandrel bent module with Vband flanges on both ends. 3" Leg and 6" leg, 3" C...

Universal stainless dumptube flanged for MVS (V-Band 38mm) wastegate outlet. 45 degree bend out of flange with 5" leg.

Universal stainless dumptube flanged for MVS (V-Banded 38mm) wastegate outlet. 90 degree bend out of flange with 6" leg.

MVS 38mm wastegate elbow. 100% 304 stainless. Flanged for Tial V-Banded 38 (MVS) wastegate. Built from heavy duty stainless flanges and thick-wall ...

Wastegate actuator with adjustable rod end and welded angle bracket. Bracket mounts behind the compressor housing. Wastegate actuator is 12 to 14 P...

Heavy duty stainless steel V-Band clamp for turbo discharge setups with industry standard 5" v-band (actual outer ring is slight larger) like GT47/...

Stainless v-band clamp for the G42 v-band turbine entry/inlet flange. Works in conjunction with flange ATP-FLS-379. **Not the same for G42 T4 Divid...

Stainless 4" v-band downpipe flange, mates to G42 v-band turbine housing exit/out V1.00. 4" groove for 4" piping.

Stainless v-band clamp for the G42 v-band turbine exit/out downpipe flange. Works in conjunction with flange ATP-FLS-380. **Not the same for the G4...

Stainless v-band downpipe flange. Mates to G42 T4 turbine housing exit/out. Has 4" groove for 4" piping.

Stainless Clampfor downpipe flange.Mates to G42 T4 turbine housing exit/out. Works in conjunction with flange P/N: ATP-FLS-378.

Gasket for Tial 46mm Wastegate Inlet or Outlet

External wastegate gasket to be used with Tial F38 - 38mm wastegates (also Turbonetics Deltagate or old Tial 35mm wastegate)

Replacement Wastegate Actuator (approx. 18 psi base pressure), for Evo X kit GTX3576R running the Garrett 4" inlet comp housing. This fitment is di...

Front and rear downpipe set for ATP-VEVO-005 kit

EVO8-DOWNPIPE-SET-VENT-TO-ATMOSPHERECompatible with ATP EVO 8 Stage 3 Stealth Kit for Mitsubishi Lancer Evolution (Product Codes: ATP-VEVO-004, ATP...

Rear downpipe section only for the Evo 8/9 kit.

+2008 EVO X (4B11T) CAST Divided Turbo Manifold for T3 and T4 flanged turbochargers. Compatible with Garrett GT30, GTX30, GT35, GTX45, GTW series, ...

3" stainless mid-pipe for 2008 and up Mitsubishi Evolution x (10), mandrel bent and V-Band flanged, connects directly to back of cat on EVO X and ...