Radium Submersible PTFE Fuel Tubing
Buy now pay later,no extra cost!
Payments from $4.11 with

This product is currently out of stock. Enter your details delow and the Speed Science team will be in touch.
Payments from $4.11 with

These fuel tubing kits are commonly used for plumbing in-tank submerged fuel pumps. The flexible convoluted tubing is manufactured from PTFE and is therefore resistant to all fuel types including alcohol blends such as E85 and suitable for EFI fuel pressure.
These tubes have been tested at Radium Engineering.
Working Pressure: 300psi
Burst Pressure: 450psi

There are 2 inner diameter sizes available including 5/16" (8mm) and 3/8" (9.5mm). When installing, use a heat gun or run hot water over the ends first to loosen the material. This allows the tubing to fit snugly over the pump's outlet. Next, torque the reuseable stainless steel SAE J1508 clamps to 13.3 in-lbs. These clamps provide a 360 degree seal with rolled edges to protect the tubing.
Use RADIUM P/N: 20-0175 and 20-0375 for the following.
-Walbro GSS341 255LPH Fuel Pump
-Walbro GSS342 255LPH Fuel Pump
-AEM 50-1000 Gas Fuel Pump
-AEM 50-1200 E85 Fuel Pump
-AEM 50-1220 E85 Fuel Pump
-Aeromotive 340R 11141 Fuel Pump
-Aeromotive 340R 11142 Fuel Pump
-Deatschwerks 9-301-1000 Fuel Pump
Use RADIUM P/N: 20-0195 and 20-0395 for the following.
-Walbro F9000262 Gas Fuel Pump
-Walbro F9000267 E85 Fuel Pump
-Walbro F9000273 Gas Fuel Pump
-Walbro F9000274 E85 Fuel Pump
-Walbro F9000285 E85 Fuel Pump
-PTFE Convoluted Tubing
-Stainless Steel EFI Tube Clamps (x2)
If you car is running too cold or too hot, chances are this is the culprit. Genuine is best - spend a little extra and sleep at night :) Images are...
View full details
Note: This is a DIY kit and will require you to customise the fitment, this is not a direct bolt-in kit. Turbo Intercooler Pipe Kit with Silicone H...
View full details
EPMAN heat tape is a metalized, polyamide polymer laminated glass cloth, with a high temperature pressure sensitive adhesive for use in extreme tem...
View full details
EPMAN Slim Electric Radiator Fan – 12″ Need to make more room, want a cleaner look or your factory fan has given up? These EPMAN electric slim fans...
View full details
A must have for any engine bay with wiring or vacuum lines running close to heat sources such as turbos, exhaust manifolds or down pipes. Designe...
View full details