ATP Turbo

Screw Clamp Worm Gear Hose Clamp for 5/8" tube with a 5/8" hose (such as oil drain)

500HP - GT3076R-WG Stock location turbo and manifold combo. Fits all 2.0T FSI models from 2006 to 2010 including TSI engines. Both Longitudinal and...

500HP - GTX2971R Stock location turbo and manifold combo. Fits all 2.0T FSI models from 2006 to 2010 including TSI engines. Both Longitudinal and T...

500HP Garrett high density/high efficiency bar and plate intercooler with Garrett cast endtanks. 29" wide, 8" tall, 3" thickness. 2.25" inlet and o...

525HP - GTX2976R Stock location turbo and manifold combo. Fits all 2.0T FSI models from 2006 to 2010 including TSI engines. Both Longitudinal and T...

3 foot (1 Yard) stick of 6" (Inner Diameter) Silicone Hose. High quality, 4 layer, hand wrapped turbo silicone. Equivalent to the length of (12) pi...

600HP Garrett high density/high efficiency bar and plate intercooler with ATP cast end tanks. 24" Wide (including endtanks, excluding hose clamp ar...

Bolt-on, stock location GTX2971R 64 AR internally wastegated turbo kit for the Ford Focus ST 2.0L Ecoboost. Stock Location, Direct Bolt-on Interna...

7/16 diameter Copper crush Washer (gasket) for OIL FEED PORT GT GTX G SeriesVery common part used on the oil feed port when using a banjo type fitt...

Hose Size: 7/8" (.875") (22mm) (Inner Diameter) Silicone Hose. High quality, 4 layer, hand wrapped turbo silicone. Length for each piece is 36" (3-...

750cc Injector Set of 4, High Impedence, Standard Bosch Style, RC Engineering

Bolt-on, stock location GTX2971R 86 AR internally wastegated turbo kit for the Ford Focus ST 2.0L Ecoboost. Stock Location, Direct Bolt-on Inte...

8mm (1.25pitch) Nut, Locking Head Common 8mm exhaust Nut with 1.25 thread pitch and locking. 12mm wrench head (nice and compact)

8mm (1.25pitch) Stud, .5 x 1.25 x 2.00 Common 8mm exhaust stud with 1.25 thread pitch. .5 before .25 shank, and 1.25 thread.

8mm Extreme Nord Lock Style Washer - Steel, M8 (also for 5/16" size bolts)Nord Lock type washers allow for more traction between the nut (or head o...

90 Degree high temp (3 ply - reinforced) silicone elbow. 1.0O" inner diameter

90 Degree high temp (3 ply - reinforced) silicone elbow. 1.25" inner diameter.

90 Degree high temp (3 ply - reinforced) silicone elbow. 1.5" inner diameter.

90 Degree 1/2" NPT to -10 AN, Male to Male

90 degree 1/8" NPT to -4AN fitting; with male to male end fittings.NOTE: select the checkbox for alternate: 90 degree 1/8" NPT to -3AN fitting; wit...

90 Degree 2" ID to 2.25" ID transition elbow. High temp wrapped 4 ply silicone for high pressure turbo applications. Note: Use t-bolt clamp that is...

90 Degree 2" ID to 2.5" ID transition elbow. High temp wrapped 4 ply silicone for high pressure turbo applications. Note: Use t-bolt clamp that is ...

90 Degree 2" ID to 2.75" ID transition elbow. High temp wrapped 4 ply silicone for high pressure turbo applications. Note: Use t-bolt clamp that is...

90 Degree 2" ID to 3" ID transition elbow. High temp wrapped 4 ply silicone for high pressure turbo applications. Note: Use t-bolt clamp that is 1/...

90 Degree 2.5" ID to 2.75" ID transition elbow. High temp wrapped 4 ply silicone for high pressure turbo applications. Note: Use t-bolt clamp that ...

90 Degree 2.5" ID to 3" ID transition elbow. High temp wrapped 4 ply silicone for high pressure turbo applications. Note: Use t-bolt clamp that is ...

90 Degree 2.75" ID to 3" ID transition elbow. High temp wrapped 4 ply silicone for high pressure turbo applications. Note: Use t-bolt clamp that is...

90 Degree high temp (3 ply - reinforced) silicone elbow. 3/4" inner diameter.

Product Description Stainless Steel 5" diameter, 90 degree mandrel bent elbow, tight 5" center line radius, 304 stainless steel.

90 degree elbow. 2.0" on both ends. Regular radius. High temp rubber.

90 degree elbow. 2.5" on both ends. Regular radius. High temp rubber.

90 degree elbow. 2.5" on both ends. Tight radius. High temp rubber.

90 degree 304 stainless steel 1" (OD) mandrel bent elbow with long legs.

90 Degree molded tight turn elbow. 3.0" to 3.0" high temp rubber. Excellent for turbo inlet use. Good for 90 degree turbo inlet tight spots and ver...

90 Degree regular radius Elbow - 3.0" to 3", Hi temp rubber, excellent for turbo inlet use.

90 Degree regular radius Elbow - 3.5" to 3.5", Hi temp rubber, excellent for turbo inlet use.

90 Degree regular radius Elbow - 4.0" to 4.0", Hi temp rubber, excellent for turbo inlet use.

90 degree transition elbow from 3" ID one leg to 3.5" ID on the other. This is on a nice tight radius turn to save space while flowing well. High t...

90 degree transition elbow from 3.5" ID one leg to 4" ID on the other. This is on a nice tight radius turn to save space while flowing well. High t...

90 Degree Transition Elbow - 2.5" to 3" - Hi Temp Rubber. This product is not silicone, but will work very well for the inlet side of the turbo.

90 Degree Transition Elbow - 3.0" to 4" - Hi Temp Rubber. This product is not silicone, but will work very well for the inlet side of the turbo.

90 Degree Transition Elbow - 3.5" to 4" - Hi Temp Rubber. This product is not silicone, but will work very well for the inlet side of the turbo.

90 degree transition elbow from 3" ID one leg to 4" ID on the other. High temp wrapped 4 ply silicone for high pressure turbo applications.

Universal stainless dumptube flanged for MVR (V-Banded 44mm) wastegate outlet. 90 degree bend out of flange with 5" leg.

Universal stainless dumptube flanged for MVS (V-Banded 38mm) wastegate outlet. 90 degree bend out of flange with 6" leg.

900HP front mounted intercooler and mounting hardware for Mustang GT (2005+) twin turbo application. Charge pipes sold separately.

900HP Garrett high density/high efficiency bar and plate intercooler with ATP cast end tanks. 36" Wide - 12" Tall - 3.5" Thickness. 3.0" inlet and ...

Tial or Garrett 90mm OD V-Band flange (w/78mm centering ring) to 4" pipe transition adapter. One piece compact design and machined from 304 Stainle...