ATP Turbo

Stainless Steel 2.75" diameter, 180 Degree Mandrel Bent Elbow, 4" Center Line Radius, with 6" legs

Stainless Steel 3.00" diameter, 90 degree mandrel bent elbow. Longer 4.5" center line radius with 6" legs wide radius.

WIDE VERSION OF ATP-FLS-088 FOR USE WITH SPECIAL HSG-T25-EWG WITH GT35R. Stainless Stee Discharge Flange, CNC machined, for GT25R/GT28R/28RS and GT...

Stainless steel gasket for Garrett 5 bolt "GT" internally gated turbine housing outlet (down-pipe side).The stainless steel gasket is compatible wi...

Stainless steel gasket for Ultimate Internal Wastegate Module Product Code: ATP-WGT-023.

Stainless steel 304 grade straight rod material. 3/8" diameter. Used for exhaust hanger. Bendable and weldable for use on exhaust systems. Listed p...

Transition 3" to 4" stainless (76mm to 102mm). No flange attached for welding to both sides.

Stainless Steel V-Band Clamp, 4.50" Max diameter, for Garrett Comp V-Band out, Large frame.

Stainless tube cradle for 3" piping - to be Used with Hanger BracketsStainless sheetmetal with double bend to mate to the OD of a 3" Tube to build ...

Stainless steel V-band flange, Mates to stock GT1446 turbo outlet. Uses stock v-band clamp. Grooved for 3" OD Tube.

304 STAINLESS-3" OD (.065" wall) - 6INCHES_LONG or a little longer is OK

Standard flange adapter size 3" V-Band flange (3.75" OD) to 4" pipe transition adapter. One piece compact design and machined from 304 Stainless St...

Compressor housing for Garrett GT4202(Both ball bearing and journal bearing versions) with 102mm 53 trim wheel (compatible turbos GT4202R/GT42RS/GT...

Compressor housing for Garrett GT4294 (Both ball bearing and journal bearing versions) with 94mm 56 trim wheel (compatible turbos GT42R/GT4294R/GT4...

Compressor housing for GT2860RS with 60mm 62 trim wheel, COMPRESSOR HSG .60 A/R, T04B style with 3" inlet and 2" outlet Applicable Garrett P/N's: ...

PRODUCT DESCRIPTION: Compressor housing for GT2871R with 71mm 56 trim wheel, COMPRESSOR HSG .60 A/R, T04B style with 3" inlet and 2" outlet, CAN AL...

Compressor housing for GT3076R 700382-5012 (or CHRA 700177-5007) with 76mm 56 trim wheel, COMPRESSOR HSG .60 A/R, T04E style with 4" inlet and 2" o...

Garrett's new compressor housing for GT3582R with "cast-in" ported shroud (anti-surge) 0.70 A/R with 4" inlet and 2.5" outlet (T04S frame size). Ap...

Standard T04S Frame Compressor housing for GTW3884R-67MM w/4" inlet and cast-in Anti-surge.

Adapter flange for 38mm or deltagate style wastegate. It rotates the wastegate placement 90 degrees, and it comes with countersunk mounting points ...

CNC Machined 5 bolt (ford style) Welding flange for T3 turbine with External wastegate use. The inner diameter of the circle is 2.5" and has a step...

(1)Steel external wastegate blockoff flange. Designed for Turbonetics Deltagate or Tial 35/38mm external wastegate. Perfect for modifying a turbo m...

GReddy Type S/R Modular Weld-On Flange Kit. Includes weld-on steel section and twist on top flange (reusable)

CNC Machined 4 bolt flange for GT/T3 turbine without internal wastegate. Machined with 3" inner diameter for 3" Downpipe use. * This flange is used...

CNC machined discharge for GT25R/GT28R/GT28RS/GT2871R and T25/28, designed with both bolt patterns, with groove for 3.00" oval tube.

HKS SSQ Steel Modular Weld-On Flange Kit. Includes Steel weld- on section and twist on top. Requires welding to mount to steel piping.

Modular Concept Weld-On Lower Section in Steel for Blow off valve

New CNC Machined weld flange for T3 turbine inlet divided WITH Tapped holes. 1/2" thick prevents warping with high heat. Bolt pattern: 3.375" x 1.7...

STEEL Banjo fitting, 14mm hole (for 14mm bolt) with -6 AN male flare.

Banjo fitting kit including SHORT steel banjo; for coolant (water) ports on Garrett ball bearing GT25, GT28, GTX28, GTX29, GT30, GTX30, GT35 and GT...

Steel braided Hose (with a 14mm Banjo hose end and a -6AN straight hose end), -6 AN, for use as a coolant line or oil line, 18 inches long. 14mm Ba...

Steel braided Hose (with a 14mm Banjo hose end and a -6AN straight hose end), -6 AN, for use as a coolant line or oil line, 24 inches long. 14mm Ba...

Steel braided Hose (with a 90 Degree hose end and a straight hose end), -6 AN, for use as a coolant line or oil line, 10 inches long. -6AN 90 Degre...

Steel braided Hose (with a 90 Degree hose end and a straight hose end), -6 AN, for use as a coolant line or oil line, 12 inches long. -6AN 90 Degre...

Steel braided Hose (with a 90 Degree hose end and a straight hose end), -6 AN, for use as a coolant line or oil line, 18 inches long. -6AN 90 Degre...

Steel braided Hose (with a 90 Degree hose end and a straight hose end), -6 AN, for use as a coolant line or oil line, 24 inches long. -6AN 90 Degre...

Steel braided Hose (with a 90 Degree hose end and a straight hose end), -6 AN, for use as a coolant line or oil line, 8 inches long. -6AN 90 Degree...

Steel Braided Hose, -10 AN size, price per foot. Order length will be cut length. Use with these hose ends to make steel braided hose assemblies: A...

Steel Braided Hose, -4 AN size, price per foot. Order length will be cut length. Use with these hose ends to make steel braided hose assemblies: AT...

Steel braided Hose, -6 AN, for use as coolant line or oil line, 12 inches long.HOSE END OPTIONS: -6AN Straight Hose End and -6AN Straight Hose End...

Steel braided Hose, -6 AN, for use as coolant line or oil line, 24 inches long. -6AN Straight Hose End and -6AN Straight Hose End.PRODUCT CONTENT: ...

Steel braided Hose, -6 AN, for use as coolant line or oil line, 6 inches long. -6AN Straight Hose End and -6AN Straight Hose End.PRODUCT CONTENT: ...

Steel Braided Hose, -6 AN size, price per foot. Order length will be cut length. Use with these hose ends to make steel braided hose assemblies: AT...

Steel braided Hose, -6 AN, for use as a coolant line or oil line, 18 inches long. -6AN Straight Hose End and -6AN Straight Hose End.PRODUCT CONTENT...

Oil Return Line -10 - 12" Length with straight end and 45 degree, Stainless Steel Braided Oil Return line 12" Length with -10 Swivel Ends. Straight...

Oil Return Line -10 - 12" Length with straight end and 90 degree, Stainless Steel Braided Oil Return line 12" Length with -10 Swivel Ends. Straight...

Oil Return Line -10 - 12" ST/ST Stainless Steel Braided Oil Return line 12" Length with -10 Swivel Ends. Straight to Straight.

Oil Return Line -10 - 15" ST/90 Stainless Steel Braided Oil Return line 15" Length with -10 Swivel Ends. Straight to 90 ends.