ATP Turbo

Custom machined sleeve to properly block off and disable function of the stock (electric) diverter valve on the 2.0L FSI turbo engine. Eliminates b...

Snap ring, internal type, for HKS blow off valve to HKS style flange.

GT3071R Turbo kit, Volvo C30 T5 engine, 450+ HP capable, Ultra-responsive Garrett dual ball bearing GT3071R, 44mm Tial Wastegate, 3" stainless down...

1.3" Spacer ring (male/female) for TiAL manifold v-band entry (GT28/GT30/GT35). Billet Machined from solid. Mild Steel.

SPACER PLATE, 3/16" BETWEEN BOLT ON GT TURBO AND UP-PIPE. RARELY REQUIRED (USED LESS THAN 1% OF THE TIME) BUT SUPPLIED IN EVERY ATP SUBARU BOLT-ON ...

Special Bolt to Plug the Speed Sensor Port on the Garrett Compressor Housing

Special flanged locknut. 8mm (1.25 pitch) nut. Locking head. Uses 12mm wrench diameter.

Backplate Adapter Ring for Garrett EVO X Compressor Housing; GT3076R Model.

Special transition, formed tube, 3" round to oval, specific version made to work with flapper flange: ATP-FLS-067 and fits together just like shown...

Replacement Kit From Tial: Turbine Housing Clamp and Bolt Kit - For Tial stainless V-band housings for GT28/GT30/GT35. 2 x Half Moon Clamps from T...

Special turbine housing, T25 Inlet, GT28 Style 5 bolt outlet, and cast 44mm flanged External wastegate port. Available for Garrett series GT28, GTX...

Special V-band Clamp from ATP FSI/TSI Stock location kit (manifold to turbo connection)

Special V-band Clamp from ATP FSI/TSI Stock location kit (manifold to turbo connection)

SPECIAL-ACTUATOR-EVOX-STOCKLOC-GT-GTX for factory style comp hsg (w/ 3 bolt inlet)

Garrett GTX2863R dual ball bearing direct drop-in turbo for the Nissan SR20DET with a .64 A/R T25 internal wastegate turbine housing. Quick spoolin...

Garrett GTX2863R dual ball bearing direct drop-in turbo for the Nissan SR20DET with a .86 A/R T25 internal wastegate turbine housing. Quick spoolin...

We call it a 3" downpipe system because we have designed the 3" downpipe assembly with total upgradability in mind. We do this by incorporating the...

New SRT-4 Cast Turbo Manifold. T3 Inlet flange. This new unit supports well over 400 wheel horsepower, and has external wastegate port pre-cast. Ma...

The Benefits of the UPP. It replaces stock convoluted rubber piece with restrictive plastic middle section. it is a 1 piece mandrel bend with no di...

SRT4 / SRT-4 Oil Feed Fitting, Engine Block side to -4 AN MaleScrews into the engine block and allows you to screw the end of any -4 AN steel braid...

ATP turbo kit for the SRT-4, 400HP, Garrett T3/T4 with Tial 38mm wastegate and all hardware shown. Choice of Garrett T3/T4E 57 trim/Stage III or T...

SRT-4 Stage 3 Kit. 450 or 500HP (turbo choice dependent), GT3071R or GT3076R. Dual ball bearing kit, all hardware with new 44mm wastegate. Features...

Stainless steel 3.00" outer diameter, 120 degree mandrel bent elbow. Tight 3" center line radius with 6" legs.

Stainless steel 2.5" diameter, 120 degree mandrel bent elbow. Tight radius with 6" legs.

Stainless steel lower downpipe flange. Can be used with ATP-FIAT-007 to make a new downpipe. Has 2 extra holes for mounting to factory support brac...

Transition 2" to 2.5" (51mm to 63mm) Outer diameter to weld to, Stainless Steel 304, 2" OD to 2.5" OD, Overall Length is 1.2" (32mm).

Transition 2.5 to 3" (63mm to 76mm) for weld to, Stainless Steel 304, 2.5" OD to 3" OD, Overall Length 1"

Stainless Downpipe Weld Flange with protruded lip, V-band- Machined stainless, mates to SPECIAL Garrett GT 3" V-band flanged housing with recess fo...

3" STAINLESS STEEL V-Band turbine housing outlet flange (down-pipe side) for Garrett G Series Small/medium Frame Turbo Models (G25-550, G25-660, G3...

Stainless 4" V-band FLANGE (DOWNPIPE SIDE) for T4 Flanged Turbine Housing on GT42/GTX42 GT45/GTX45

Stainless steel coupler. 2" OD with beaded lips for clamping. AOL is 2-3/4". Use for hose extension or weld and add hose tee.

Stainless coupler, 2.5" OD with beaded lips for clamping. AOL is 2-3/4". Use for hose extension or weld and add hose tee.

1 flange (with 78mm centering ring) and 1 clamp to mate to "GT style 3" v-band discharge on "GT" style turbine housing where the flange has a 3.55"...

Stainless DOWNPIPE SIDE Flange and Clamp set for GT40R, GT4088R, GT4094R, GTX4088R. Flat flange without protruding lip to go with the flange flange...

Flanged and welded stainless dumptube for the 44mm wastegate exit on the EVO8 bolt-on turbo kit but only when it is venting to the atmosphere

Flange, Stainless Steel (304), turbine discharge (turbo exit / downpipe flange) for MCT Mini cooper R56 stock turbo. 2.75" ID opening good for a 3"...

Stainless V-Band Flange for Turbine inlet (manifold side) on TiAL turbine housings. Intended for TiAL turbine housings compatible with Garrett GT55...

Stainless V-band Flange for turbine outlet (down-pipe side) on TiAL turbine housings. Intended for TiAL turbine housings compatible with Garrett GT...

Stainless heat-shield for general use on Scion tC turbo applications. Covers top of turbo exhaust manifold and top of turbine housing to prevent ra...

Heavy Duty Stainless Steel V-Band Clamp and Stainless Steel Manifold flange set. The stainless steel V-Band flange is recommended for welding a tur...

ATP stainless steel v-band turbine inlet flange (exhaust / turbo manifold side). Compatible with Garrett undivided V-Band Inlet and Outlet Ni-Resi...

304 Stainless Steel CNC Machined weld flange for T25, GT25, T28 turbine inlet WITH Tapped holes (M8 x 1.25 threads). 1/2" thick prevents warping wi...

304 Stainless Steel CNC Machined weld flange for T3 turbine inlet WITH Tapped holes. 1/2" thick prevents warping with high heat. Bolt pattern: 3.37...

STAINLESS STEEL, Machined weld flange for T04 turbine inlet. 1/2" thick prevents warping with high heat. Bolt pattern: 3.250" x 2.750". The Flange ...

Stainless steel 1.5" diameter 45 degree elbow. For dump tube use.

Stainless steel 1.5" diameter 90 degree elbow. For dump tube use

Stainless steel 1.75" diameter 45 degree elbow. For dump tube use.

Stainless steel 1.75" diameter 90 degree elbow. For dump tube use.