ATP Turbo

Ported shroud compressor housing for T3/T4E 60 trim with ported shroud (anti-surge machining) 0.60 A/R with 4" inlet and 2" outlet (T04E frame size).

PUSHLOCK Black anodized -10 AN 45 DEGREE hose end, for use with pushlock type hoses.

PUSHLOCK Black anodized -10 AN 90 DEGREE hose end, for use with pushlock type hoses.

PUSHLOCK Black anodized -10 AN STRAIGHT hose end, for use with pushlock type hoses.

PUSHLOCK Black anodized -6 AN 45 DEGREE hose end, for use with pushlock type hoses.

PUSHLOCK Black anodized -6 AN 90 DEGREE hose end, for use with pushlock type hoses.

PUSHLOCK Black anodized -6 AN STRAIGHT hose end, for use with pushlock type hoses.

Quick connect fitting Male 3/8" size to -6 AN male. Allows ease of transition from -6 AN to the newer O-ringed squeeze and release type fitting fou...

Quick connect fitting Male 5/16" size to -6 AN male. Allows ease of transition from -6 AN to the newer O-ringed squeeze and release type fitting fo...

Rear 02 sensor mod (spacer), easy bolt-on kit installs inline with the rear 02 sensor on the 02 bung to prevent the CEL due to racepipes. Off road ...

Coolant (rear) line assembly for a Garrett GT or GTX series upgrade turbo on the Evo X (and Evo 8 / Evo 9). An excellent rear coolant line solution...

Rear of cat (or cat delete) to downpipe on 1.8T engine found on 1996 to 2005 VW Passat and Audi A4 with stock location turbo with KKK flange.

Rear downpipe section only for the Evo 8/9 kit.

Recessed fitting. Weld bung for O2 sensor. Mild Steel.

Fitting, -6AN (flare) female to -4AN (flare) male. Used to convert a -6AN male to -4AN male

Relocation Adapter for stock (electric) diverter Valve 2.0T FSI/TSI. Allows the stock (or other) electric diverter valve to be mounted off the stoc...

Replacement Wastegate Actuator (approx. 18 psi base pressure), for Evo X kit GTX3576R running the Garrett 4" inlet comp housing. This fitment is di...

SPECIAL RESTRICTED - Banjo Bolt for low profile oil feed line on GT and GTX Ball Bearing turbochargers. Optional (not required) 3 crush washers.CRU...

RESTRICTED* Low profile oil feed *LONG NOSE* Banjo Fitting Kit for Garrett GT25R to GT35R; and GTX28 to GTX35 series turbochargers.Includes one LON...

Retaining Clip to retain rod end eyelet to the swingvalve on turbine housing. 6.5mm eyelet diameter for 6mm pin diameter on the crankarmApplicable ...

95mm Retaining Clip Holds Chra To Compressor Housing On All Bearing Turbos Between GT2554R To GT3582R. Applicable Garrett P/N's: 400589-0375

Rod Extension kit for internal wastegate actuator, (1)coupler, (2) nuts, (1) threaded rod 2" long.

Rubber insert sleeve. High temp steps 2.50" OD pipe up to 3" OD. For intake use only. No pressure.

Rubber insert sleeve. High temp steps 2.75" OD pipe up to 3" OD. For intake use only. No pressure.

RUBBER O-RING USED ON ADAPTER RING P/N: ATP-FLA-011

Supercharger delete kit for the 2.0L SS Cobalt or Saturn Redline. All CNC machined hardware to remove the supercharger and mount t-body, map sensor...

Stage 3, 350HP or 400HP (turbo choice dependent), GT28RS or GT2876R, dual ball bearing kit. All hardware with internally wastegated setup.

Stage 3, 450HP or 500HP (turbo choice dependent), GT3071R or GT3076R, dual ball bearing kit. All hardware with new 38mm wastegate. Features 3" Garr...

Separate Elbow from ATP FMIC Kit with sensor mount welded

Set of replacement bolts, washers, gasket for ATP High Flow Manifold stock location 1.8T. Includes turbo to manifold gasket, 3 bolts special length...

SFI Certified - Garrett GEN2 GTX5533R (88mm) dual ball bearing turbocharger (turbine housing sold separately). Designed for race classes limited to...

Short Straight, Universal stainless dumptube flanged for MVR (V-Band 44mm) wastegate outlet. Straight out of flange with short leg.

Short Straight, Universal stainless dumptube flanged for MVS (V-Band 38mm) wastegate outlet. Straight out of flange with short 4" leg.

SHORT VERSION! No cutting or trimming before welding!Short Transition (Formed) stainless 3" OD to 3.5" OD, overall length 1.2" (30mm) no flange att...

Short Transition (Formed) stainless 3" OD to 4" OD, overall length 1.8" (45mm) no flange attached for welding to both sides, 76mm to 102mm

Short Transition (Formed) stainless 3.5" OD to 4" OD, overall length 1.25" (32mm) no flange attached for welding to both sides, 89mm to 102mm

Short Transition (Formed) stainless 4" OD to 5" OD, overall length 1.8" (45mm) no flange attached for welding to both sides, 102mm to 127mm

Upper and lower silicone intercooler hoses for the 2005.5 through 2008 B7 Audi A4 with 2.0T FSI engine. Replaces stock rubber hoses. Part 1 replace...

Black 45 degree transition elbow, 3" ID on one leg and 4" ID on the other. High temperature wrapped 4 ply silicone for high pressure turbo applicat...

Turbo silicone, multi-layer, wrapped, high tem, high pressure, 90 degree elbow. 2.25" ID (57.15mm) inner diameter. Has a 1" (25mm) nipple on the si...

Download Garrett 2015+ BMW M3 - M4 (F80 M3 | F82/F83 M4) Intercooler Spec SheetSILVER Intercooler Upgrade Kit, Garrett PN 888883-6001, BMW M3/M4 (F...

MILD Steel - V-band Flange Machined for 2.5" Tube, Use 2 of these with the 2.5" V-Band Clamp for nice exhaust joint without the need for gasket. CN...

STAINLESS Steel - V-band Flange Machined for 2.5" Tube, Use 2 of these with the 2.5" V-Band Clamp for nice exhaust joint without the need for gaske...