ATP Turbo

5 bar MAP sensor for misc tuning/turbo use. 2011 is the year for going over 30 PSI of boost. Make sure your ECU knows you're running that much boos...

O-Ring (4.530 x 0.067) Garrett Part Number 403069-0060 APPLICABLE GARRETT PART NUMBER: 403069-0060

O-ring (seal), goes between CHRA and backplate Adapter, all GT25 through GTX35

PRODUCT DESCRIPTION:O-ring (Seal), goes between Backplate and Comp Housing, T04E Frame GT/GTX. Standard on GT3076R, GT3071R, GTX3071R, GTX3076R, an...

O-Ring between GT42, GT42R, and GT42RS Compressor Outlet V-Band Flanges. V-band Flanges and Clamp Set part #ATP-FLS-055

O-Ring for Bosch Fuel Injectors, Top or Bottom O-Ring

O-ring for inlet compressor adapter used in part number ATP-FLA-012

O-ring, seal, at mounting Flange, Tial BOV, models 50mm, Tial Q, Tial QR

O2 sensor, special Wideband, Bosch LSU Compatible. High precision tuning wideband for various tuning and logging devices. Uses the universal "flat"...

OEM Nissan Silvia S15 SR20DET ball Bearing T28 Turbo, Nissan P/N: 14411-91F00. 310 HP capable. Excellent responding turbo for 4 cylinder applicatio...

All coolant and oil fittings that come with our Fiesta ST stock location kit.

Fitting allows regular 5/8" hose for oil drain line. 1/2" NPT Male to 5/8" Single Barb (equiv to -10). To be used with ATP-FLA-009 or ATP-FLA-010 d...

Oil return (oil drain) flange NOW with large 3/4" NPT thread port for maximum flow out of the turbo. Designed for large width drain flange models b...

Gasket for oil drain (oil return) flange. Large width drain flange version.** One gasket for each quantity unit **PRODUCT COMPATIBILITY: GT47/GTX4...

Gasket for oil drain (oil return) flange.** One gasket for each quantity unit **PRODUCT COMPATIBILITY: T3, T3/T4, T4 GT journal bearing GT32, GT408...

Gasket, for Drain Flange, GT25R, GT28R, GT28RS, GT30R, GT35R, Also oil feed flange T3

Sold Individually Gasket, for Drain Flange, GT25R, GT28R, GT28RS, GT30R, GT35R, Also oil feed flange T3

LONG VERSION of the oil return (oil drain) flange with integrated -10 AN/JIC male flare. 2 inches overall length. One piece design for easy install...

Oil drain return flange gasket for Garrett GTW Series turbochargers. Compatible with oil drain flange Product Code: ATP-FLA-042PRODUCT CONTENT: On...

Oil Drain (Return) Flange Kit, -10AN, Borg Warner EFR Series 6258 6758, 7163 ,7670, 8374, 9180, 7064

Oil Drain (Return) Flange Kit, 5/8"BARB, Borg Warner EFR Series 6258 6758, 7163 ,7670, 8374, 9180, 7064.

Oil return (oil drain) flange with integrated -10 AN/JIC male flare. One piece design for easy installation. Made from billet T6061 aircraft alumin...

Oil return (oil drain) flange with integrated 5/8" slip-on barb fitting (same inner diameter as -10 AN/JIC flare). Made from billet T6061 aircraft ...

V2.0 EVO X OIL DRAIN TUBE ASSEMBLY ATP / GARRETT GT/GTX EVO X KIT , OIL RETURN LINE / DRAIN TUBE, EVO 10

Oil drain tube. CNC aluminum with integrated flanged LONG straight tube (no angle) machined from billet aluminum. T3, T4, T3/T4, GT40R, GT42R

Oil drain tube. CNC machined aluminum with integrated flange T3/T4 - 5 degree tilt. Machined from billet aluminum. Easy to install.

Oil pan drain fitting for MKIV (and other) VW Audi engines that are originally normally aspirated. Allows engine to use the stock oil pan's oil dra...

Drain flange adapter kit allows original T3 or T4 flanged oil drain line to be used when switching to GT BB turbo. Flange, Gaskets and Bolts inclu...

GT25R, GT28R, GT30R, GT35R oil drain tube. CNC aluminum with integrated flange. Straight tube (no angle). Machined from billet aluminum. Easy to in...

Fiat 500 Abarth Oil Feed adapter, Stock location, Stock oil feed port, remove stock line , screw this fitting into the stock feed port and accept s...

0.065 inch restricted port oil feed flange with integrated -4 AN/JIC male flare. INSTALLATION COMPONENTS: (one unit) Oil inlet feed flange gasket ...

Oil feed flange with integrated -3 AN/JIC male flare. Low profile one piece design for easy installation. Intended for compatible turbochargers wit...

Oil feed flange with integrated -4 AN/JIC male flare. Low profile one piece design for easy installation. Intended for compatible turbochargers wit...

UNDRILLED VERSION of the oil feed flange with integrated -4 AN/JIC male flare. Low profile one piece design for easy installation. Intended for use...

-03 Oil Feed Line, Braided Steel Line With female (flare/JIC/AN) swivel ends (one straight and one 90 end), -3 size, 12 INCHES long.

-03 Oil Feed Line, Braided Steel Line With female (flare/JIC/AN) swivel ends (one straight and one 90 end), -3 size, 18 INCHES long.

-03 Oil Feed Line, Braided Steel Line With female (flare/JIC/AN) swivel ends (one straight and one 90 end), -3 size, 24 INCHES long.

-3AN stainless steel (high pressure) braided line. Three feet in length and includes pre-crimped -3AN swivel hose ends (1x 90 degree fitting and 1x...

-3AN stainless steel (high pressure) braided line. Four feet in length and includes pre-crimped -3AN swivel hose ends (1x 90 degree fitting and 1x ...

-3AN stainless steel (high pressure) braided line. Five feet in length and includes pre-crimped -3AN swivel hose ends (1x 90 degree fitting and 1x ...

-03 Oil Feed Line, Braided Steel Line With female (flare/JIC/AN) swivel ends (one straight and one 90 end), -3 size, 16 INCHES long.

PRODUCT DESCRIPTION:4AN stainless steel (high pressure) braided line. Three feet in length and includes pre-crimped -4AN swivel hose ends (1x 90 d...

-4AN stainless steel (high pressure) braided line. Four feet in length and includes pre-crimped -4AN swivel hose ends (1x 90 degree fitting and 1x ...

-4AN stainless steel (high pressure) braided line. Five feet in length and includes pre-crimped -4AN swivel hose ends (1x 90 degree fitting and 1x ...

Oil Feed Line -4 size - SS Braid 1 Ft. (12 inches) Stainless Steel Braided high temp line with AN/JIC swivel ends precrimped. High Pressure tight.

Oil Feed Line -4 size - SS Braid 18 inches. Stainless Steel Braided high temp line with AN/JIC swivel ends precrimped. High Pressure tight.

Oil Feed Line -4 size - SS Braid 2 Ft. (24 inches) Stainless Steel Braided high temp line with AN/JIC swivel ends precrimped. High Pressure tight.

Oil Feed Line -4 size - SS Braid 20 inches. Stainless Steel Braided high temp line with AN/JIC swivel ends precrimped. High Pressure tight.