ATP Turbo

NEW Garrett® Intercooler upgrade for the 2012+ Ford Focus ST 2.0L Ecoboost The Garrett® direct fit Ford Focus ST performance charge air cooler...

POWERMAX™ DIRECT FIT PERFORMANCE INTERCOOLERS 2015+ Subaru WRX 2.0L (not for STI)Garrett direct fit performance intercoolers are engineered for en...

Actuator for internal wastegate assembly. Special lower pressure (7 psi) version of the actuator similiar to the one found on the GT28RS/GT2871R. H...

Internal Wastegate Bracket will fit any T25, T3, T4 Style compressor housing. Has been redesigned many times to make it truly universal. Will also ...

8mm (1.25 pitch) Stud, long enough to accomodate ultimate internal wastegate.

Low profile oil inlet (oil feed) -3AN LINE Kit for GT25R through GT35R (or GTX28 through GTX35) series turbochargers. 48" line length with integrat...

V-band adapter module. "GT" style T3 internally wastegated 5 bolt 3" V-band. Low profile cast part. Cast / Machined Stainless Steel.1.5" overall he...

Lower Adapter Flange for 1.8T Oil Drain to Oil Pan, Typically used in conjunction with 1/2" NPT male to -10 AN fitting. CNC machined aluminum.

Lower Intercooler Piping set for front mounted intercooler on Mustang GT (2005+up). Can mate to the 900HP intercooler core (ATP-MUS-005) All mandre...

LOWER O-RING FOR GARRETT EVOX DRAIN TUBE

Machined compressor inlet adapter. GT25/28, T25/28 large bore, 2.5" slip-on connection. Low profile, overall height 5/8".

Special machined o-ring adapter fitting for the Fiat Abarth stock coolant pipe. Bollts to coolant pipe and allows for -6 plumbing of new coolant li...

Machined oil supply fitting for 2009 and up 2.0T (TSI) engine block.Comes with: Machined adapter with o-ring seal to block -3 AN adapter attached ...

ATP CNC billet aluminum universal MAF housing. 3" OD. Designed to work with MAF elements from all '95 to '04 engines, ie. 1.8T, VR6, 2.0L

Aluminum MAF Housing, Universal, 3.5" OD (3.37" ID). Designed to work with MAF elements from all '95 to '04 engines, ie. 1.8T, VR6, 2.0L

MAF Housing Kit with stock sensor mount (and stainless fasteners) for 2.0T FSI engine, Custom Machined Aluminum unit with flow optimization countou...

MAF top for stock sensor mount for 2.0T FSI engine. Custom machined aluminum unit.

Manifold Adapter, allows T3 flanged turbo such as twinscroll GT30R to bolt up to Stock EVO8/9. Adapter keeps true twin-scroll all the way through w...

Weld adapter for Garrett Twinscroll V-Band entry turbine housings. Constructed from stainless steel.Compatible with Garrett Divided V-band Entry an...

3 Bar map sensor for misc tuning use. Compatible with all engine management and tuning devices requiring the use of a "3 bar MAP sensor".Up to 29.7...

Map sensor flange to weld to aluminum charge pipe on Hyundai Coupe 2.0T (2010 to 2012 model years).APPLICATION NOTES:Compatible with Hyundai Genesi...

Marmon (Beveled V-Band style turbine outlet flange) (for 5" piping) for the Garrett T6 divided turbine housing for the Garrett GT42 and GT45 series...

Heavy duty stainless steel Marmon (non-V-Band) clamp for beveled (Marmon) style non-v-band turbine outlet flange of the Garrett T6 divided turbine ...

Flange, CNC Machined 304 STAINLESS Steel, 2 bolt, 3" opening, Machined flange with Elongated Bolt Holes, fits Mazdspeed 3 or Mazdaspeed 6 at any of...

Mazdaspeed externally wastegated turbine housing for Garrett GT and GTX series turbochargers; and flanged for TiAL MVS wastegate. The turbine housi...

Metal gasket for turbo to manifold for late model evos from 6 up

Metal gasket for turbo to O2 housing, later model evos 6 to 9

Metal gasket for turbo to up-pipe for 2002-2012 WRX/STI Turbo (all non-twinscroll).

"Now CNC Machined weld flange for T25, GT25, T28 turbine inlet WITH Tapped holes (M8 x 1.25 threads). 1/2" thick prevents warping with high heat."

New CNC Machined weld flange for T3 turbine inlet WITH Tapped holes. 1/2" thick prevents warping with high heat. Bolt pattern: 3.375" x 1.75"Tapped...

Machined weld flange for T04 turbine inlet. 1/2" thick prevents warping with high heat. Bolt pattern: 3.250" x 2.750". The Flange has an inner diam...

This product has been replaced by P/N: ATP-VVW-255 which you can purchase outright and no core is required to be sent in from you. Mild turbo kit (...

Mini Cooper Turbo S (2007 and newer) oil feed line kit for GT Ball Bearing conversion. Includes banjo fitting at the engine side, steel braided oil...

Mustang GT (2005 and newer) Garrett. Turbo GT Tuner Twin Turbo Kit for the 4.6L V8 engine. 600 to 800 HP capable (depending on turbo choice).Kit co...

MVS 38mm wastegate elbow. 100% 304 stainless. Flanged for Tial V-Banded 38 (MVS) wastegate. Built from heavy duty stainless flanges and thick-wall ...

Low profile version of the ATP-FLS-130 - MVS 38mm wastegate elbow. 100% 304 stainless. Flanged for Tial V-Banded 38mm (MVS) wastegate. Allows for f...

New Ball Bearing Garrett GTX-4202R Turbocharger (GTX-R Series) - NO TURBINE HOUSINGApplicable Garrett P/N's:800269-5002S451888-0044

T4 Divided Inlet and 4" V-band Outlet Turbine Housing Introducing the Garrett GTX4202R from the GTX-R series. The GTX4202R is a more efficient and...

Product Description: New Ball Bearing Garrett GTX-4294R Turbocharger (GTX-R Series) - NO TURBINE HOUSING Applicable Garrett Part Numbers: 800269-5...

PRODUCT SPECIFICATIONS: Compressor Wheel Inducer: 70.3mm Compressor Wheel Exducer: 94mm Compressor Wheel Trim: 56 Compressor Housing: 60 A/R Turbin...

The latest ball bearing GTX-R series of the GT45 range is here on time for the race season. This is an even more efficient and more potent version ...

New Drag Race GTX4202R with special 49 trimmed (71.8mm inducer and 102.3 mm exducer) with NO TURBINE HOUSING. This turbo is built meet class requir...

A 400+ HP capable GT3071R-WG for the Volvo C30 / MKII Focus ST225, NSL (Near Stock Location) Internally wastegated V-band Turbo and Manifold.The Ga...

NEW Garrett® Intercooler upgrade for the 2012+ Ford Focus ST 2.0L Ecoboost ATP Modified - TiAL READY edition. This special setup comes with a weld...

3" stainless steel downpipe assembly for the Volvo C30 T5. Replaces the restrictive stock 2.25" diameter downpipe and cat assembly. Upper and lower...

GT2871R Bolt-on turbo kit for the 1995 to 2003 SAAB 900 and 9-3 Turbo models with 2.0T engine. Turbo kit uses stock exhaust manifold and comes with...

GT28RS Bolt-on turbo kit for the 1995 to 2003 SAAB 900 and 9-3 Turbo models with 2.0T engine. Turbo kit uses stock exhaust manifold and comes with ...