ATP Turbo

Flange, adapter, vacuum source block for 2015+ 2.3L Ecoboost MustangEasy one bolt piggyback installation into MAP sensor at intake manifold and pro...

5 bolt mild steel downpipe discharge flange for GT2252.

Flange, Discharge GT32 6 Bolt Discharge, 2.5" Opening, Downpipe side, Mild Steel. Works well on both internal(6 ears) and external wastegate(round)...

Flange, Discharge T3/GT 4 Bolt 2.5" Inner Diameter Opening, Downpipe side, Mild SteelUse 2.5" OD tubing in the groove or 3" OD tubing outside the g...

Flange, Discharge, 3 bolt, Audi Longitudinal 1.8T, CNC machined, 3" opening.

T3 discharge (downpipe)5 bolt stainless flange ("ford style" 5 bolt) for an external wastegate setup. 304 Stainless. 2.5" Opening.

Laser cut Flange, T4 discharge mild steel, 4 bolt round outline flange found on ON-CENER T04 turbos, 3" opening

Flange, downpipe outlet, 4 bolt, for GT1241 Turbo, mild steel

Stainless 4" v-band downpipe flange, mates to G42 v-band turbine housing exit/out V1.00. 4" groove for 4" piping.

Downpipe flange for the 6 Bolt (6BT3) turbine exit. Not for the RB25DET.

Top Bottom 2 Bolt 3" 304 stainless downpipe flange for the Camaro 6th gen. 2.0T 4 Cylinder.

Top 4 Bolt 3" 304 stainless downpipe flange for the Camaro 6th gen. 2.0T 4 Cylinder.

Stainless v-band downpipe flange. Mates to G42 T4 turbine housing exit/out. Has 4" groove for 4" piping.

BIG (high volume) OIL DRAIN FLANGE for all Garrett Large Frame GT55 GTX55 Turbos. Includes a large -12AN male fitting for a "true" -12 size full fl...

BIG (high volume) oil drain flange for all Borg Warner large frame S400 SX SX-E, S500 SX SX-E Turbos. Includes a large 3/4" Hose Barb fitting for a...

BIG (high volume) OIL DRAIN FLANGE for all Garrett Large Frame GT55 GTX55 Turbos. Includes a "true" 3/4" Hose Barb for full flow out of the turbo.

Special oil drain flange combo with -12AN return fitting for Borg Warner Flange S400 SX SX-E S200 S300 S200-SXE

Special combo 45 degree tight turn elbow oil drain flange for the GT/GTX, GT25 thru GTX35. 5/8" hose barb.

Special combo 45 degree tight turn elbow oil drain flange for the T3/T4 GT/GTX40-45.

Special oil drain flange combo with -12AN return fitting for T3/T4, GT/GTX 40 thru 45.

Special oil drain flange, 1/4" (6mm) SPACER PLATE return fitting for GT/GTX 28/30/35.

FLANGE, COMPRSR, 3D ALUM, 2" OUTLET, MACHINED WITH 2BOLT PATTERN, has 1/8" NPT port for convenient pressure signal. 2.75" bolt center to bolt cente...

Stainless Downpipe Weld Flange with protruded lip, V-band- Machined stainless, mates to SPECIAL Garrett GT 3" V-band flanged housing with recess fo...

Flange, CNC Machined 304 STAINLESS Steel, 2 bolt, 3" opening.Has a recessed area to sit a 3" tube into and cradle and weld for smoother internal flow.

Flange, CNC Machined 304 STAINLESS Steel, 2 bolt, 3" opening, Machined flange fits, Evo 8 / 9 / X / HGC rear 2 bolt pattern.Has a recessed area to ...

304 Stainless steel weld flange. V-Band machined, for use with 2" tubing and has a 3" outer flange diameter. Uses standard V-band clamp to join two...

Stainless Flange, Turbine (downpipe side) OUTLET for Tial V-Band IW/G (Internally Gated) Housing on GT30 and GT35 series. Flange OD 4" and Tube OD ...

FLAT stainless steel 5" machined v-band weld flange. Mates to industry standard 5" (use 5" tube) v-band flanges and use 5" standard v-band clamp (a...

Steel - V-band Flange Machined for 3" Tube, Use 2 of these with the 3" V-Band Clamp for nice exhaust joint without the need for gasket. Also popula...

3 Inch V-Band flange (3.75 Inch Outer Diameter). Machined from 304 Stainless Steel. Designed for 3 Inch diameter pipes.Compatible with Garrett Turb...

CNC'd steel external wastegate weld flange. Designed for Turbonetics Deltagate or Tial 38mm external wastegate. Perfect for dump tubes. Mounting ho...

(1)Wastegate weld flange. Designed for Tial 38mm external wastegate (or other compatible gates such as Turbonetics, Turbosmart, etc.). Perfect for ...

3" steel weld v-band flange. Weld directly to T04 (T4) turbine housing with cast in groove to convert complete turbine discharge with a protruded l...

Discharge Flange CNC mild steel machined for Stock turbo 3 bolt turbine outlet on 1.8T Audi A4/Passat engine. Has a recessed area for the 3" pipe ...

Flange, Tial 44mm / Tial MVR Wastegate Inlet Flange, 304L Stainless Steel

Flange, Tial 44mm / Tial MVR Wastegate Outlet Flange, 304L Stainless Steel

Stainless steel inlet/outlet weld flange for Tial 46mm wastegate. Flange only, does not come with the gasket.

Flange, Tial 60mm wastegate, V60 Inlet (manifold side) 304L Stainless Steel.

Flange, Tial 60mm wastegate, V60 Outlet (Dumptube side) 304L Stainless Steel

Flange, Tial V-banded 38mm MVS (V38) Wastegate Inlet Flange, 304L Stainless Steel.

Flange, Tial V-banded 38mm MVS (V38) Wastegate Outlet Flange, 304L Stainless Steel.

CNC machined turbine mild steel discharge flange for Garrett GT15 turbo. Designed with opening for 3" oval tube (ATP-FLS-060) sold separately.

Flange, turbine inlet, 3 bolt, for GT1241 Turbo, mild steel

Turbine Inlet Flange, Larger rectangular bolt pattern with 4.5" and 2.75" center to center bolt patterns. Bolt pattern is also found on larger full...

T6 undivided turbine inlet flange. Larger rectangular bolt pattern with 4.5" and 2.75" center to center bolt patterns. Bolt pattern is also found o...

4" stainless v-band (actually 4.21" OD Marmon)(106.9mm) downpipe flange for the Borg Warner S SX SX-E S200/S300 series turbos. Includes heavy duty ...

Product Description GT/GTX (30/50) combo flange/flitting, with 3/4" OD hose barb for SRT4 (and other engines with 3/4" hose barb which is larger th...

T3/T4 combo flange/fitting, with 3/4" OD hose barb for SRT4 (and many other engines with bigger than typical 5/8") drain (matches oil drain tubes o...