ATP Turbo

Popular 3 wire E85 Ethanol content sensor. Used in majority E85 / flex-fuel tuning applications; and ethanol content gauges.Wire harness sold separ...

Electrical connector and wire harness for 3 wire E85 Ethanol content sensor.E85 Ethanol content sensor sold separately. Available here: (Product C...

Easy MAP Sensor adapter wire harness, converts your old GM 3/4 bar plug to go into AEM 5 BAR sensor

EGT BUNG, 304 Stainless, 1/8" NPT, for welding onto manifold/header/downpipe for EGT Probe.

45 Degree Silicone Elbow 2.00" inner Diameter. Re-inforced 3 - 4 Ply Material.

45 Degree Silicone Elbow 2.25" inner Diameter. Re-inforced 3 - 4 Ply Material.

45 Degree Silicone Elbow 2.50" inner Diameter. Re-inforced 3 - 4 Ply Material.

45 Degree Silicone Elbow 2.75" inner Diameter. Re-inforced 3 - 4 Ply Material.

45 Degree Silicone Elbow 3.00" inner Diameter. Re-inforced 3 - 4 Ply Material.

45 Degree Silicone Elbow 3.75" inner Diameter. Re-inforced 3 - 4 Ply Material.

45 Degree Silicone Elbow 4.00" inner Diameter. Re-inforced 3 - 4 Ply Material.

90 Degree Silicone Elbow 2.00" inner Diameter. Re-inforced 3 or 4 Ply Material.

90 Degree Silicone Elbow 2.25" inner Diameter. Re-inforced, 3 or 4 Ply Material.

90 Degree Silicone Elbow 2.50" inner Diameter. Re-inforced 3 - 4 Ply Material.

90 Degree Silicone Elbow 2.75" inner Diameter. Re-inforced 3-4 Ply Material

90 Degree Silicone Elbow 3.00" inner Diameter. Re-inforced 3-4 Ply Material.

90 Degree Silicone Elbow 4.00" inner Diameter. Re-inforced 3 - 4 Ply Material.

Cast Aluminum 90 degree elbow with nice tight radius but high flow path. 4 inches outer diameter with "beaded" lip for additional security when use...

(1) Cast Aluminum Elbow with nice tight radius but high flow path. 2" OD great for welding onto turbo compressor or intercooler inlet/outlet where ...

(1) Cast Aluminum Elbow with nice tight radius but high flow path. 2.5" OD great for welding onto turbo compressor or intercooler inlet/outlet wher...

(1)Cast Aluminum Elbow with nice tight radius but high flow path. 3" OD great for welding onto turbo compressor or intercooler inlet/outlet where s...

Electrical connector plug for GM IAT (Intake Air Temp) sensor. Standard GM 2 wire weatherproof plug used on many ECU systems including standalone E...

End Cap -10 AN/JIC, Caps off a -10 (#10) male Product Notes ** 1 End Cap sold per unit **

End Cap -4 AN/JIC, Caps off a -4 (#4) male. Product Notes ** 1 End Cap sold per unit **

End Cap -6 AN/JIC, Caps off a -6 (#6) male Product Notes ** 1 End Cap sold per unit **

End Cap, -3 AN/JIC, Caps off a -3 (#3) male

End Plug, -10 AN/JIC male plug to terminate and close off the end of a -10 AN/JIC return line.

End plug, -4 AN/JIC male plug. Used to terminate and close off the end of a -4 AN/JIC feed line

End plug, -6 AN/JIC male plug. Used to terminate and close off the end of a -6 AN/JIC coolant line

Injector adapter wire. EV6 to EVO X. Allows an oval plug/with side release style injector to be plugged into the stock EVO X wiring harness. QTY 1 ...

EVO 7/8/9 stock style turbo discharge flange. Divorced 5 bolt, dual outlined profile for divorced style 3" primary tube and 1.75" wastegate tube us...

Model Years: 2008 + Engine: 2.0L 4B11 Turbocharged Inline 4 The Garrett® Evo X Turbo Upgrade allows you to push your AWD, rally-bred monster up to...

Model Years: 2008 + Engine: 2.0L 4B11 Turbocharged Inline 4 The Garrett® Evo X Turbo Upgrade allows you to push your AWD, rally-bred monster up to...

Our Stage III turbo kit for the EVO8 (aka "Stealth kit") Version 2 After months of testing and development with the EVO8 engine combination, we ha...

EVO8-DOWNPIPE-SET-VENT-TO-ATMOSPHERECompatible with ATP EVO 8 Stage 3 Stealth Kit for Mitsubishi Lancer Evolution (Product Codes: ATP-VEVO-004, ATP...

EVO8 Oil Feed adapter, Cyl Head to -4 Male AN Flair. Adapter goes from proprietary Metric thread on cylinder head to -4 AN Male. Allows any of our ...

Gasket, 3 bolt, 3 inch, Generic To be used with the generic 3", 3 bolt flange - New, all metal.

Downpipe Hanger Bent bracket for building a downpipe on the Mazdaspeed 3 / 6, others, 10mm solid StainlessNote: The tube cradle is sold separately ...

External wastegate gasket to be used with Tial F38 - 38mm wastegates (also Turbonetics Deltagate or old Tial 35mm wastegate)

Externally Gated GTX3067R Bolt On Turbo Kit For Subaru WRX/STI*** Optional Tial 44mm wastegate and dump tube shown are sold separately ****.NOTE: A...

Externally Gated GTX3071R Bolt On Turbo Kit For Subaru WRX/STI*** Optional Tial 44mm wastegate and dump tube shown are sold separately ****.APPLICA...

Externally Gated GTX3076R Bolt On Turbo Kit For Subaru WRX/STI*** Optional Tial 44mm wastegate and dump tube shown are sold separately ****.APPLICA...

Externally Gated GTX3576R Bolt On Turbo Kit For Subaru WRX/STI*** Optional Tial 44mm wastegate and dump tube shown are sold separately ****.APPLICA...

Externally Gated GTX3582R Bolt On Turbo Kit For Subaru WRX/STI*** Optional Tial 44mm wastegate and dump tube shown are sold separately ****.APPLICA...

Fasteners option from product code ATP-MCT-033