ATP Turbo

T04S Frame Clamp and bolts for Comp Housing to Backplate. Standard on the GT/GTX35 Series Turbos Housings with T04S Frame compressor housing. Pleas...

Aluminum compressor discharge flange for EVO 6/7/8/9/10 turbo. 2 bolt flanged with progressive taper and radiused inside exit for high flow. Elim...

Compressor housing for GT35R, 82mm 56 trim wheel, COMPRESSOR HSG .70 A/R, T04S style with 4" inlet and 2.5" outlet Applicable Garrett P/N's: 40972...

Compressor Housing Backplate adapter ring goes between CHRA and compressor housing on GT2560R through GT35R.

Compressor housing for 60-1, 76mm 56 trim wheel, COMPRESSOR HSG .70 A/R, T04S style with 4" inlet and 2.5" outlet Applicable Garrett P/N's: 409722...

Compressor housing for Garrett GT4088R

Compressor housing for Garrett GT4094R

Compressor housing for Garrett GT4508 (80mm). Garrett Part Number: 737942-0020

Compressor housing for Garrett GT4708 (80mm). Garrett Part Number:737942-0018

Compressor housing for Garrett GT4718 (88mm). Garrett Part Number:737942-0019

Compressor housing for GT2554R (or GT2854R) with 54mm 60 trim wheel, COMPRESSOR HSG .80 A/R, smallframe with slip-on inlet and 3 bolt outlet.

Compressor housing Garrett, standard on GT2560R aka GT28RApplicable Garrett P/N's: 763885-0001

Compressor housing for GT2876R 76MM, .70a/r T04S style with 4" inlet and 2.5" outlet.Applicable Garrett P/N's: 409722-0004

Compressor housing for Special GT3076R-WG turbo with 76mm 52 trim wheel. Select from 3 frame sizes to fit your space packaging requirements. Either...

Compressor housing for Special GT3076R-WG-C10 turbo with 76mm 48 trim wheel. Select from 2 frame sizes to fit your space packaging requirements. Ei...

T04E Frame Compressor housing for T04E compressor 50 trim wheel - 2.75" Inlet and 2" outlet.

T04E Frame Compressor housing for T04E compressor 57 trim wheel - 2.75" Inlet and 2" outlet.

T04E Frame Compressor housing for T04E compressor 60 trim wheel - 2.75" Inlet and 2" outlet.

Compressor Housing, GT28R style (2 bolt inlet and 3 bolt outlet) for GT2871R 52 Trim.

Standard Compressor housing for GTX2860R with same external dimensions as GT28RS with 3" inlet and 2" outlet, but has anti-surge built in.

Standard Compressor housing for GTX2863R with same external dimensions as GT28RS with 3" inlet and 2" outlet, but has anti-surge built in.

Standard Compressor housing for GTX2867R with same external dimensions as GT28RS with 3" inlet and 2" outlet, but has anti-surge built in.

Standard Compressor Housing for Garrett GTX3584RS (.72 A/R, T04S Frame, 4" Ported Shroud Inlet, and 2.5" Slip Hose Outlet).

Standard Compressor Housing for Garrett GTX3584RS (.72 A/R, T04S Frame, 4" Ported Shroud Inlet, and 2.5" V-Band Outlet). V-Band Outlet Adapter (AT...

Compressor housing for GT3071R with 71mm 56 trim wheel, COMPRESSOR HSG .50 A/R, T04E style with 2.75" inlet and 2" outlet , CAN ALSO BE USED AN ALT...

Compressor housing for GT3071R with 71mm 56 trim wheel, COMPRESSOR HSG .50 A/R, T04E style with 4" inlet and 2" outletCAN ALSO BE USED AS AN ALTERN...

ATP Compressor Housing, GT2554R Turbo, 3" in / 2" out hose connection, anti-surge BFr.

ATP Compressor Housing, GT2871R-52T Turbo, 3" in / 2" out hose connection, anti-surge BFr For the special 52 Trim GT2871R Turbo.

Compressor Housing, GT5533R FOR TURBO P/N: 775844-5001S (91mm)

Compressor Housing, GT5533R FOR TURBO P/N: 775844-5002S (94mm)

Compressor Housing, GT5541R 106mm FOR TURBO P/N: 775844-5005S.

ATP Turbo Compressor Housing, Upgrade, for GT2560R Turbo, T04B (GT28RS) Frame, 3" in / 2" out Hose Connection, .60 A/R. Retains the use of the stoc...

Alternate v-band clamp for the Garrett GTX84RS (aka GTX3584RS) compressor housing with a v-band outlet flange.Matching v-band flange for charge-pip...

Compressor housing outlet V-Band Flange for the Garrett GTX84RS (aka GTX3584RS). Made from Aluminum and includes an o-ring gasket. Weld a 2.5" diam...

Stock size cast compressor inlet elbow for the Evo X bolt-on GT/GTX turbos. For ATP/Garrett turbo only, not for stock/MHI turbo.

Electrical connector kit for standard type EFI injector. Includes plug and pins for wires

Electrical connector kit for use with 3bar map sensor. Includes plug and pins for wires

Steel braided in/out coolant line assembly for the Nissan RB25DET. Used for the GT (BB T28)/GTX top or bottom mounted turbo. Includes fittings.

Steel braided in/out coolant line assembly for the Nissan SR20DET. Used for the GT (BB T28)/GTX top or bottom mounted turbo. Includes fittings.

Copper Crush Washer. Specify diameter of bolt (10mm, 12mm, 14mm or 18mm); or *special* crush washer for GT Oil Inlet & Banjo Inlet (+$1.00).APP...

ATP Turbo Copper Washer-Crush-18mm

Images shown with compressor housing and example downpipe.Special Turbine Housing-T3 Inlet, internal wastegated with built in swing-valve. Turbine...

Billet machined aluminum coupler, 2.25" OD with beaded lips for clamping. AOL is 1.85". Use for hose extension or weld and add hose tee.

Custom #6 (-6AN) steel braided line including hose ends.Select a specific line length; and choose either a straight, 45 degree, or 90 degree fittin...

Price based on 150mm length - contact us for pricing on other lengths Custom #4 (-4AN) steel braided line including hose ends.Select a specific li...

Diaphram for Tial F46 46mm WasteGate

Diaphram for Tial V60 60mm WasteGate