All Products

Replacement Brake discs only for Forge Motorsport Brake kits. 380 x 32 Discs  Proprietary iron alloy rotor discs with directional curved vanes...

This oil catch tank kit is the product of many months of intensive research and development by our in-house development team, and the end result is...

Replacement filter for FMIND2RCT & FMINDK2 Please watch our video on how to fit an air filter without damaging it.  

PLEASE NOTE: THIS PRODUCT WILL NOT FIT 2018 ONWARDS MODELS This Forge Motorsport intake kit is for the VW Polo, Skoda Spaceback, and Seat Toledo ...

We recommend servicing your valve every 3 years, or 20,000 miles, whichever comes sooner This valve is for the turbocharged 1.5-litre EcoBoost pe...

This adaptor plate is installed between the boost (MAP) sensor and its mounting Boss. This allows for a takeoff to run a vacuum operated valve or f...

This Forge Motorsport mandrel bent aluminium pipe replaces the original Ford plastic pipe between the intake and turbo inlet at the rear of the eng...

25mm Alloy 90 Degree Bend Technical Details Outside diameter: 25mm (1") Manufactured from extruded 16 swg round tube with a wall thickness o...

38mm Alloy 90 Degree Bend Technical Details Outside diameter 38mm. (1 1/2") Manufactured from extruded 16 swg round tube with a wall thickne...

16mm Alloy 90 Degree Bend Technical Details Outside diameter: 16mm (5/8") . Manufactured from extruded 16 swg round tube with a wall thickne...

28mm Alloy 90 Degree Bend Technical Details Outside diameter: 28mm (1 1/8") . Manufactured from extruded 16 swg round tube with a wall thick...

This oil catch tank kit is the product of many months of intensive research and development by our in-house development team, and the end result is...

Forge Motorsport Boost Tap Kit for 1.2 TSI Engines with code CBZA, CBZB or CBZC. This adaptor installs between the boost (MAP) sensor and the intak...

If you wish to rebuild or service your Forge Motorsport actuator, we can offer a kit of replacement parts. By servicing your actuator at regular in...

If you wish to rebuild or service your Forge Motorsport actuator, we can offer a kit of replacement parts. By servicing your actuator at regular in...

If you wish to rebuild or service your Forge Motorsport actuator, we can offer a kit of replacement parts. By servicing your actuator at regular in...

THIS PRODUCT DOES NOT FIT LEFT HAND DRIVE VEHICLES The Forge Motorsport high flow intake hose for the MQB platform 2.0 engines, eliminates the hi...

A set of four silicone boost hoses for the Audi S1. Forge Motorsport design these hoses so they can withstand pressures that can be experienced o...

This Forge Motorsport hose fits the Audi S1 and is constructed from the highest grade European silicone and fabric reinforcement allowing it to wit...

This precision-machined bush insert has been carefully designed to reduce the range of movement in the OEM Lower Dogbone bush that counter acts...

This precision-machined bush insert has been carefully designed to reduce the range of movement in the OEM Lower Dogbone bush that counter acts...

The Forge Motorsport intake hoses for the Focus RS Mk3 removes the ‘corrugated’ construction of the original Ford hose, with a larger smooth intern...

This is a replacement for OEM part number 17517617597 As the preferred and official supplier of to www.minichallenge.co.uk Forge Motorsport is pr...

We recommend servicing your valve every 3 years, or 20,000 miles, whichever comes sooner Forge Motorsport are pleased to offer a Blow Off Valve (...

Pair of Actuators for Nobel M12M40. Forge Motorsport were one of the first company’s in the world to design and manufacture the billet two-piece ...

In order to ensure that you have the correct hose clamps for your hoses, we have put together a full kit, to ensure a perfect fit. These worm drive...

In order to ensure that you have the correct hose clamps for your hoses, we have put together a full kit, to ensure a perfect fit. These worm drive...

The Forge Motorsport Turbo Blankets are designed to isolate the radiant heat produced by the turbocharger. Designed by the Forge development team f...

We recommend servicing your valve every 3 years, or 20,000 miles, whichever comes sooner This valve kit is an evolution of the FMARSDV dump valve...

This does not fit the 306bhp model Forge Motorsport have been at the forefront of Mini tuning since 2006, and proud sponsor of the Mini Challenge...

Before fitment, please ensure the spacer fits flat to the back of the wheel. Please also test for clearance after fitment at the wheel arch under f...

Front Replacement Brake discs for Forge Motorsport Brake kits. 330 x 32 Discs  Bolt Kit 2-piece floating rotors CNC machined lightweight forg...

We recommend servicing your valve every 3 years, or 20,000 miles, whichever comes sooner Forge Motorsport recirculation valve for the Fiat 500 Ab...

We recommend servicing your valve every 3 years, or 20,000 miles, whichever comes sooner Why buy the Forge Fiat 500 dump valve? Your Fiat 500 is ...

60mm Clamping Ring for FMDVRAY

This kit is specifically designed for the Renault Clio Trophy 220 model. We use a custom designed silicone hose combined with a Pipercoss high flow...

Product Description: De-resonator induction hose for the 1.0 Ecoboost. This Forge Motorsport silicone induction hose (aka Secondary Induction hos...

This Forge Motorsport high flow intake charge hose fits to the throttle body at the rear of the engine bay and is specifically designed to fit the ...

A set of ultra-high performance brake hoses for the Ford Focus RS MK3 Hosetechnik lines are hand-finished with Teflon-lined braided stainless ste...

As the preferred and official supplier of intercoolers to Mini Challenge, we are proud to present our intercooler for the Mini JCW F56 Chassis (201...

Forge Motorsport accept no responsibility for damage caused to the vehicle by incorrect installation or setup of this product As the official and...

Forge Motorsport accept no responsibility for damage caused to the vehicle by incorrect installation or setup of this product As the official and...

Our golf ball style gear knob is made from billet aluminium, this heavier than OEM design creates a nicer feel when changing gear. In either black ...

Hose Clamp Kit for FMKT025 Audi RS6 C7 Boost Hoses In order to ensure that you have the correct hose clamps for your hoses, we have put together ...

Pair of silicone boost hoses for the Audi RS6 C7. Forge Motorsport design these hoses so they can withstand pressures that can be experienced on tu...

A set of 4 ultra-high performance brake hoses for the Audi RS6 C7 Hosetechnik lines are hand-finished with Teflon-lined braided stainless steel b...

This will fit engine codes AXX, BWA, BWE, BPY (K03 Turbo) This part will enhance the sound of the turbo spooling and improve response due to its ...

*Please note - this will not fit with Nightvision unless it is removed* Forge Motorsport Charge Cooler Radiator for the Audi RS6 C7 and Audi RS7 ...