{"product_id":"radium-quick-fill-dump-cans","title":"Radium Quick Fill Dump Cans","description":"\u003cp\u003eDump cans are used in motorsports when quick refueling pit stops are essential. Depending on the configurations below, these dump cans can fill up to 14 times faster than a standard fuel jug.\u003cbr\u003e\u003cimg src=\"http:\/\/www.radiumauto.com\/Assets\/ProductImages\/Dump_Can_Flow_Rates.jpg\" alt=\"\"\u003e\u003cbr\u003eThe main difference between a \"dump can\" and a common \"fuel jug\" is the vent architecture. For quick filling, air entering the can must replace the exiting fuel at the same rate. If not, a vacuum will create a flow restriction and produce a \"gurgle\" or \"chug\" effect. These Radium Engineering 6 gallon dump cans are designed with a large 1.675\" OD vent tube that comes from the bottom, minimizing refueling leaks and maximizing non restrictive air flow for quick-filling. NOTE: The large vent tube can also be used for re-filling the dump can.\u003cbr\u003e\u003cbr\u003eAccurate graduation marks are molded in \"US GALLONS\" (shown below) on one side, and \"LITERS\" on the opposite side.\u003cbr\u003e\u003cimg src=\"http:\/\/www.radiumauto.com\/Assets\/ProductImages\/Dump_Can_6_Gal-11.jpg\" alt=\"\"\u003e\u003cbr\u003eThe dump cans are molded from a durable polymer safe for all fuel types (leaded gas, unleaded gas, diesel, AV gas, methanol, ethanol, E15, E85, etc.). The external rectangular shape was designed to match the common fuel jug industry standard (9.5\" x 9.5\"). This allows for easy securing and storing with other fuel jugs. The integrated vent handle has finger grips for comfort. In addition, a similar ergonomic feature is molded into the bottom (shown below) for ease of handling when the dump can is inverted.\u003cbr\u003e\u003cimg src=\"http:\/\/www.radiumauto.com\/Assets\/ProductImages\/Dump_Can_Grip.jpg\" alt=\"\"\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSPECIFICATIONS\u003c\/strong\u003e\u003cbr\u003eVolume: 6 Gallons (22 Liters)\u003cbr\u003eHeight: 25.25\" (641mm)\u003cbr\u003eWidth: 9.5\" (241mm)\u003cbr\u003eDepth: 9.5\" (241mm)\u003cbr\u003eVent OD: 1.675\" (43mm)\u003cbr\u003eVent ID: 1.375\" (35mm)\u003cbr\u003ePour Spout OD (if cut): 2.5\" or 3\"\u003cbr\u003eFlow Rate (standard fill): 5.86gpm (max)\u003cbr\u003eFlow Rate (dry break): 25.75gpm (max)\u003cbr\u003eColor: Semitransparent White\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003e20-0697-00 QUICK FILL DUMP CAN, 6 GALLON, STANDARD FILLER\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThis dump can assembly has all the features mentioned above and is configured for \"standard filling\" (non-dry break). This is ideal for all types of motorsports.\u003c\/p\u003e\u003cp\u003e\u003cimg src=\"http:\/\/www.radiumauto.com\/Assets\/ProductImages\/20-0697-00.jpg\" alt=\"\"\u003e\u003c\/p\u003e\u003cp\u003eThe dump can features knurled aluminum pour and vent caps. The inner flow diameter of the stainless steel spout is maximized yet still compatible with all OEM fuel fillers. \u003c\/p\u003e\u003cp\u003e\u003cimg src=\"http:\/\/www.radiumauto.com\/Assets\/ProductImages\/Dump_Can_6_Gal-3.jpg\" alt=\"\"\u003e\u003c\/p\u003e\u003cp\u003eFor ergonomics, the anodized aluminum plug also features knurled machining.\u003c\/p\u003e\u003cp\u003e\u003cimg src=\"https:\/\/www.radiumauto.com\/Assets\/ProductImages\/Dump_Can_6_Gal-9.jpg?ts=075412\" alt=\"\" width=\"600\" height=\"400\"\u003e\u003c\/p\u003e\u003cp\u003eThe vent cap features 6 different fuel type indicators: (UNLEADED, LEADED, METHANOL, ETHANOL, PRE-MIXED, DIESEL). The small knob can be screwed into the appropriate threaded hole to mark the fuel type inside.\u003c\/p\u003e\u003cp\u003e\u003cimg src=\"http:\/\/www.radiumauto.com\/Assets\/ProductImages\/Dump_Can_6_Gal-2.jpg\" alt=\"\"\u003e\u003c\/p\u003e\u003cp\u003eFor slow controlled filling, the \u003ca href=\"http:\/\/www.radiumauto.com\/Plastic-Vent-Flip-Cap-P1917.aspx\"\u003eplastic flip cap\u003c\/a\u003e (shown) can be simply unlatched. For slightly quicker filling, the entire vent cap can be unscrewed (not recommended). Use with caution.\u003c\/p\u003e\u003cp\u003e\u003cimg src=\"http:\/\/www.radiumauto.com\/Assets\/ProductImages\/20-0697-00_A.jpg\" alt=\"\" width=\"600\" height=\"400\"\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFLOW RATES\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eRADIUM Dump Can (standard fill) = 5.86gpm\u003cstrong\u003e (vent cap ON\/flip cap open)\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eRADIUM Dump Can (standard fill) = 6.70gpm \u003cstrong\u003e(vent cap OFF)\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eGENERIC BRAND X Fuel Jug = 1.86gpm (flip cap open)\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003e20-0697-01 QUICK FILL DUMP CAN, 6 GALLON, 1.5IN DRY BREAK\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThis dump can assembly includes a Radium Engineering dry break probe compatible with 1.5\" dry break receptacles. As shown below, the short tube is clear for fuel fill monitoring.\u003c\/p\u003e\u003cp\u003e\u003cimg src=\"http:\/\/www.radiumauto.com\/Assets\/ProductImages\/Dump_Can_6_Gal-7.jpg\" alt=\"\"\u003e\u003c\/p\u003e\u003cp\u003eThis dump can features knurled aluminum pour and vent caps. And because these unscrew, filling the dump can is a quick efficient process.\u003c\/p\u003e\u003cp\u003e\u003cimg src=\"http:\/\/www.radiumauto.com\/Assets\/ProductImages\/Dump_Can_6_Gal-2.jpg\" alt=\"\"\u003e\u003c\/p\u003e\u003cp\u003eAs shown above, the vent cap features 6 different fuel type indicators: (UNLEADED, LEADED, METHANOL, ETHANOL, PRE-MIXED, DIESEL). The small knob can be screwed into the appropriate threaded hole to mark the fuel type inside. For slow controlled filling, the \u003ca href=\"http:\/\/www.radiumauto.com\/Plastic-Vent-Flip-Cap-P1917.aspx\"\u003eplastic flip cap\u003c\/a\u003e (shown) can be simply unlatched. For slightly quicker filling, the entire vent cap can be unscrewed (not recommended). Use with caution.\u003c\/p\u003e\u003cp\u003e\u003cimg src=\"http:\/\/www.radiumauto.com\/Assets\/ProductImages\/20-0697-01.jpg\" alt=\"\" width=\"600\" height=\"400\"\u003e\u003c\/p\u003e\u003cp\u003eNOTES: \u003c\/p\u003e\u003cp\u003e1. The plastic pour spout can be cut to suit 2.5\" and 3\" dry breaks.\u003c\/p\u003e\u003cp\u003e2. For maximum flow efficiency, the fuel tank (or fuel cell) should have a large vent (see Radium P\/N: \u003ca href=\"http:\/\/www.radiumauto.com\/Dynamic-Safety-Vent-DSV-Valves-P1508.aspx\"\u003e20-0535\u003c\/a\u003e).\u003c\/p\u003e\u003cp data-empty=\"true\"\u003e\u003cstrong\u003e\u003cstrong\u003eFLOW RATES\u003c\/strong\u003e\u003cbr\u003e\u003c\/strong\u003eRADIUM Dump Can (dry break) = 19.02gpm \u003cstrong\u003e(vent cap ON\/flip cap open)\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eRADIUM Dump Can (dry break) = 25.75gpm\u003cstrong\u003e (vent cap OFF)\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eGENERIC BRAND X Fuel Jug = 1.86gpm (flip cap open)\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003e20-0687-00 DUMP CAN CAP ASSEMBLY, STANDARD FILLER\u003c\/strong\u003e\u003cbr\u003eCommonly used as a replacement part or for transfering fuel from a dry break to a simple container.\u003cbr\u003e\u003cimg src=\"http:\/\/www.radiumauto.com\/Assets\/ProductImages\/20-0687-00.jpg\" alt=\"\" width=\"600\" height=\"400\"\u003e\u003cbr\u003e\u003cstrong\u003eCOMPATIBLE WITH THE FOLLOWING:\u003cbr\u003e\u003c\/strong\u003e1. 20-0697-00 QUICK FILL DUMP CAN, 6 GALLON, STANDARD FILLER\u003cbr\u003e2. 20-0697-01 QUICK FILL DUMP CAN, 6 GALLON, 1.5IN DRY BREAK\u003cstrong\u003e\u003cbr\u003e\u003cbr\u003eNOT COMPATIBLE WITH THE FOLLOWING:\u003c\/strong\u003e\u003cbr\u003e1. 20-0497-00 QUICK FILL DUMP CAN, 8GAL, STANDARD FILLER\u003cbr\u003e2. 20-0497-01 QUICK FILL DUMP CAN, 8GAL, 1.5IN DRY BREAK\u003cbr\u003e3. 20-0697-EDC QUICK FILL DUMP CAN, 6 GALLON, 1.5IN DRY BREAK\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003e20-0687-01 DUMP CAN CAP ASSEMBLY, DRY BREAK\u003c\/strong\u003e\u003cbr\u003eCommonly used to convert a stadard filler dump can to a dry break.\u003cbr\u003e\u003cimg src=\"https:\/\/www.radiumauto.com\/Assets\/ProductImages\/20-0687-01.jpg?ts=050358\" alt=\"\"\u003e\u003cbr\u003e\u003cstrong\u003eCOMPATIBLE WITH THE FOLLOWING:\u003cbr\u003e\u003c\/strong\u003e1. 20-0697-00 QUICK FILL DUMP CAN, 6 GALLON, STANDARD FILLER\u003cbr\u003e2. 20-0697-01 QUICK FILL DUMP CAN, 6 GALLON, 1.5IN DRY BREAK\u003cstrong\u003e\u003cbr\u003e\u003cbr\u003eNOT COMPATIBLE WITH THE FOLLOWING:\u003c\/strong\u003e\u003cbr\u003e1. 20-0497-00 QUICK FILL DUMP CAN, 8GAL, STANDARD FILLER\u003cbr\u003e2. 20-0497-01 QUICK FILL DUMP CAN, 8GAL, 1.5IN DRY BREAK\u003cbr\u003e3. 20-0697-EDC QUICK FILL DUMP CAN, 6 GALLON, 1.5IN DRY BREAK\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003e15-0004 DRY BREAK PROBE COVER\u003cbr\u003e\u003c\/strong\u003eDesigned to protect dirt and debris from contaminating the dynamic elements of a 1.5\" dry break probe. Because it is manufactured from polyurethane leather, it does not dry out or absorb water making it easy to clean. \u003c\/p\u003e\u003cp\u003e\u003cimg src=\"http:\/\/www.radiumauto.com\/Assets\/ProductImages\/15-0004_Install1.jpg\" alt=\"\"\u003e\u003c\/p\u003e\u003cp\u003eThe internal elastic band prevents the cover from falling off in high winds. Radium Engineering logo embroidery on 2 sides.\u003c\/p\u003e\u003cp\u003e\u003cimg src=\"http:\/\/www.radiumauto.com\/Assets\/ProductImages\/15-0004.jpg\" alt=\"\"\u003e\u003c\/p\u003e\u003cp\u003eTo install, simply spread the cover over the probe like a sock. To uninstall, simply pull the integrated handle upwards.\u003c\/p\u003e\u003cp data-empty=\"true\"\u003e\u003cstrong\u003eMating Parts:\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eMates to 20-0496 Dry Break, 1.5in, Male\u003c\/p\u003e","brand":"Radium Engineering","offers":[{"title":"No Thanks! \/ Dump Can Cap Assembly, Standard Filler","offer_id":40039653113955,"sku":"rad20-0687-00","price":123.71,"currency_code":"NZD","in_stock":true},{"title":"No Thanks! \/ Dump Can Cap Assembly, Dry Break","offer_id":40039653146723,"sku":"rad20-0687-01","price":625.47,"currency_code":"NZD","in_stock":true},{"title":"Quick Fill Dump Can, 6Gal, Standard Filler \/ No Thanks!","offer_id":40039653179491,"sku":"rad20-0697-00","price":412.63,"currency_code":"NZD","in_stock":true},{"title":"Quick Fill Dump Can, 6Gal, Standard Filler \/ Dry Break Probe Cover","offer_id":40039653212259,"sku":"rad20-0697-00+15-0004","price":401.93,"currency_code":"NZD","in_stock":true},{"title":"Quick Fill Dump Can, 6Gal, Standard Filler \/ Dump Can Cap Assembly, Standard Filler","offer_id":40039653245027,"sku":"rad20-0697-00+20-0687-00","price":468.96,"currency_code":"NZD","in_stock":true},{"title":"Quick Fill Dump Can, 6Gal, Standard Filler \/ Dump Can Cap Assembly, Dry Break","offer_id":40039653277795,"sku":"rad20-0697-00+20-0687-01","price":960.48,"currency_code":"NZD","in_stock":true},{"title":"Quick Fill Dump Can, 6Gal, 1.5in Dry Break \/ No Thanks!","offer_id":40039653310563,"sku":"rad20-0697-01","price":893.57,"currency_code":"NZD","in_stock":true},{"title":"Quick Fill Dump Can, 6Gal, 1.5in Dry Break \/ Dry Break Probe Cover","offer_id":40039653343331,"sku":"rad20-0697-01+15-0004","price":960.48,"currency_code":"NZD","in_stock":true},{"title":"Quick Fill Dump Can, 6Gal, 1.5in Dry Break \/ Dump Can Cap Assembly, Standard Filler","offer_id":40039653376099,"sku":"rad20-0697-01+20-0687-00","price":1027.51,"currency_code":"NZD","in_stock":true},{"title":"Quick Fill Dump Can, 6Gal, 1.5in Dry Break \/ Dump Can Cap Assembly, Dry Break","offer_id":40039653408867,"sku":"rad20-0697-01+20-0687-01","price":1519.04,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0253\/8848\/2659\/products\/20-0697-00_A.jpg?v=1662495119","url":"https:\/\/www.speedscience.co.nz\/products\/radium-quick-fill-dump-cans","provider":"Speed Science","version":"1.0","type":"link"}