{"title":"Wiring Harnesses","description":"","products":[{"product_id":"k-tuned-k-swap-conversion-harness-honda-ek-96-98","title":"K-Tuned K-Swap Conversion Harness - EK 96-98","description":"\n\u003cp\u003eK-Tuned stepped into the wiring market for a reason. To release what they feel is the highest quality and easiest to install conversion harness available. K-Tuned used several of their competitor's harnesses and in short, felt the need to make several improvements based on the flaws we encountered.\u003c\/p\u003e\n\u003cp\u003eA K-swap conversion harness is a must-have part for any K-series engine swap. The harness is required to join up the factory K-series engine harness to the factory dash harness of the swapped car. It is designed integrate the K-series ecu and all of the related electrical functions get them operating properly. Functions like the fuel pump, tach, speedo, starter signal, O2 sensors, etc.\u003c\/p\u003e\n\u003cp\u003eThe K-Tuned harness is 99% plug and play and takes very little time to install. The harness is constructed with quality mil-spec, oem coloured wire and finished with a nice clean looking mil-spec nylon sleeving for protection. Our harnesses come complete with installation instructions. The end result is a very high quality conversion harness at the best possible price. Several applications are available so get yours to make sure your K-swap is wired up right!\u003c\/p\u003e","brand":"K-Tuned","offers":[{"title":"Default Title","offer_id":29175332307043,"sku":"KTH-96-98","price":760.24,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0253\/8848\/2659\/products\/EK_2.jpg?v=1580874293"},{"product_id":"k-tuned-k-swap-conversion-harness-ef-civic-crx","title":"K-Tuned K-Swap Conversion Harness - EF Civic\/Crx","description":"\n\u003cp class=\"store_normal\"\u003eWe stepped into the wiring market for a reason. To release what we feel is the highest quality and easiest to install conversion harness available. We've used several of our competitor's harnesses and in short, we felt the need to make several improvements based on the flaws we encountered. Just like every other K-Tuned product, they don't leave our hands unless we feel that it is a top quality part that we would use on our own personal cars.\u003c\/p\u003e\n\u003cp class=\"store_normal\"\u003eA K-swap conversion harness is a must-have part for any K-series engine swap. The harness is required to join up the factory K-series engine harness to the factory dash harness of the swapped car. It is designed integrate the K-series ecu and all of the related electrical functions get them operating properly. Functions like the fuel pump, tach, speedo, starter signal, O2 sensors, etc.\u003c\/p\u003e\n\u003cp class=\"store_normal\"\u003eThe K-Tuned harness is 99% plug and play and takes very little time to install. The harness is constructed with quality mil-spec, oem colored wire and finished with a nice clean looking mil-spec nylon sleeving for protection. Our harnesses come complete with installation instructions. The end result is a very high quality conversion harness at the best possible price. Several applications are available so get yours to make sure your K-swap is wired up right!\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e\u003cbr\u003ePlease make sure to select your model. We need to know if your car was dual-point inject or multi-point injection. There is an adapter required for certain models. If you are unsure of your car feel free to contact us at us.\u003c\/p\u003e\n\u003cp\u003eSome modification may be required for EF8\/9 models.\u003c\/p\u003e","brand":"K-Tuned","offers":[{"title":"Default Title","offer_id":29175360815203,"sku":"KTH-88-91","price":760.24,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0253\/8848\/2659\/products\/kth-88-91_1.jpg?v=1580787747"},{"product_id":"hybrid-racing-k-swap-ground-wire-kit","title":"Hybrid Racing K-Swap Ground Wire Kit","description":"\n\u003cp\u003eOften when doing a K-Swap, the original grounds don't reach or require cutting and splicing to get everything connected. Hybrid Racing's K Swap Ground Kit is a cost-effective way to be sure that you will not run into any problems that may be caused by improperly grounded components and make a quick and easy solution to getting your K-Swap grounded.\u003c\/p\u003e\n\u003cp\u003eGood ground connections are arguably the most important part of any electrical system. Without them, there's no way for current to flow through an electrical system. Being confident that your electrical system is properly grounded is critical when it's time to troubleshoot problems with any fuel injected car. Obviously, this is even more important in the case of an engine swapped vehicle, where any number of electrical issues could arise.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFits:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e92-00 Civic with K-Swap\u003c\/li\u003e\n\u003cli\u003e94-01 Integra with K-Swap\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e They can be used on other K Swapped vehicles, but you may have to find different places on the chassis to connect the cables.\u003c\/p\u003e","brand":"Hybrid Racing","offers":[{"title":"Default Title","offer_id":29175440146531,"sku":"HYB-GRD-01-05","price":116.99,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0253\/8848\/2659\/products\/29df34c1f9bf5972e285c4687fcd01f2_2000x_feb3d936-8cba-4c70-962f-b49128918c32.jpg?v=1580788294"},{"product_id":"speedfactory-ecu-conversion-harnesses","title":"SpeedFactory ECU Conversion Harnesses","description":"\u003cp\u003eThe use of an OBD-1 (92-95) ECU is needed for proper tuning of your high-performance engine. The SpeedFactory Racing ECU Conversion Harnesses \u003cspan class=\"GramE\"\u003eallows\u003c\/span\u003e you to use an OBD-1 Honda\/Acura M\/T ECU in an OBD-0, OBD2-A or OBD2-B vehicle.\u003c\/p\u003e\n\u003cp\u003eWe designed our harnesses to be superior to other versions available on the market by using original equipment style ECU pin connections on all plugs, lengthening the harness leads to 7\" and by using durable automotive grade wire that exceeds OEM specifications.\u003c\/p\u003e\n\u003cp\u003eInstallation is simple and no cutting or soldering is necessary. Plugin one side to your OBD-1 ECU and the other side into your factory engine harness.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSF-01-040 \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe SpeedFactory Racing Honda OBD1 (Vehicle) to OBD2A (ECU) REVERSE Conversion Harness allows you to use any OBD2A Honda\/Acura M\/T ECU in an OBD1 vehicle.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFor OBD-0 chassis there are additional parts required to complete your OBD-0 to OBD-1 conversion when using our harness.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eAdditional Parts List:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eOBD-1 distributor\u003c\/li\u003e\n\u003cli\u003eOBD-1 4-wire Oxygen Sensor\u003c\/li\u003e\n\u003cli\u003eOBD-1  Honda ECU\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNOW SELLING - the rare and usually ultra-expensive OBD1-OBD2a harness for those wanting to run an ITR ECU in their OBD1 eg\/dc etc\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"SpeedFactory","offers":[{"title":"OBD1-OBD2A","offer_id":29175537303651,"sku":"SF-01-040","price":252.41,"currency_code":"NZD","in_stock":true},{"title":"OBD2A-OBD1","offer_id":29175537205347,"sku":"SF-01-041","price":187.62,"currency_code":"NZD","in_stock":true},{"title":"OBD2B-OBD1","offer_id":42846591189091,"sku":"SF-01-042","price":187.62,"currency_code":"NZD","in_stock":true},{"title":"OBDO-OBD1","offer_id":42846591254627,"sku":"SF-01-043","price":187.62,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0253\/8848\/2659\/products\/obd2a-obd1.jpg?v=1569190326"},{"product_id":"speedfactory-distributor-jumper-harness","title":"SpeedFactory Distributor Conversion Harnesses - OBD1 and OBD2 conversion","description":"\n\u003cp\u003eSpeedFactory Racing Distributor Conversion Harnesses were developed to save you time and also to help eliminate the many common problems associated with distributor re-wiring.\u003c\/p\u003e\n\u003cp\u003ePerfect for engine swaps or mis-matched distributor-to-engine harness situations, we designed our harnesses to be superior to other versions available on the market by using original equipment style pin connections on all plugs, keeping the leads to a safe yet functional length, and by using durable automotive grade wire that meets\/exceeds OEM specifications.\u003c\/p\u003e\n\u003cp\u003eInstallation is simple and no cutting or soldering is necessary. Plug in one side of the harness to your Engine Loom and the other side into your Distributor.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSuit D\/B\/H\/F Series\u003c\/strong\u003e\u003c\/p\u003e","brand":"SpeedFactory","offers":[{"title":"OBD1 Loom - OBD2 Distributor","offer_id":29175563878499,"sku":"SF-01-044","price":73.7,"currency_code":"NZD","in_stock":true},{"title":"OBD2 Loom - OBD 1 Distributor","offer_id":29175563911267,"sku":"SF-01-045","price":73.7,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0253\/8848\/2659\/products\/jumper_1.jpg?v=1580789036"},{"product_id":"hybrid-racing-universal-k-swap-wiring-harness","title":"Hybrid Racing Universal K-Swap Wiring Conversion Harness","description":"\n\u003cp\u003e\u003cb\u003eWho should purchase the Universal Harness?\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003eThe Hybrid Racing Universal K-Series Swap Conversion Wiring Harness is designed for those people who have decided to install a K-Series engine into a non-honda chassis or a chassis where a standard plug and play conversion harness is not available. (such as Preludes, DA Integras, Accords, and older Honda chassis)\u003c\/p\u003e\n\u003cp\u003eThis harness has also been used in custom open wheel cars such as the Ariel Atom, RCR Superlite Roadster, Sandrails, and 3 wheeled Trikes. It has also been used on Mini Coopers, Toyota MR-2s, Lotus Elises as well as full blown tubed frame race cars.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e**If your engine of choice is the K-Series motor and you plan to use the OEM K-Series ECU then this harness will help you get it started**\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eWhat is included with the race harness?\u003c\/b\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFuel pump relay\u003c\/li\u003e\n\u003cli\u003eMain relay\u003c\/li\u003e\n\u003cli\u003ePrimary oxygen sensor relay\u003c\/li\u003e\n\u003cli\u003eProvisions for the OEM K-Series 02-04 Wideband o2 sensor and an OBD2 port\u003c\/li\u003e\n\u003cli\u003eOutputs including, tachometer, speedometer, low oil pressure warning, malfunction indicator, fan control, fuel pump control and for the starter relay\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eWith over ten years of K-Series swap wiring experience, the Hybrid Racing Conversion Harness is the most widely used and reliable K-Swap conversion harness on the market. This conversion harnesses powers thousands of K-Swaps all over the world!\u003c\/p\u003e\n\u003cp\u003eThe K-Swap harness interfaces with your factory dash harness, your OEM K-Series engine harness, and your K-Series ECU allowing for a simple plug and play K-Swap.\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eWhat engine harness does the Hybrid Racing conversion harness work with?\u003c\/b\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eThis harness works with all USDM \/ JDM 02-04 wiring harnesses including, K20A, K20A2, K20A3.\u003c\/li\u003e\n\u003cli\u003eThis harness is wired to use the factory wideband O2 sensor so European customers using the UKDM K20A\/K20A2 wiring harness will need to convert the harness to use the narrowband type sensor.\u003c\/li\u003e\n\u003cli\u003eThis harness does NOT work with any 05-06(NZDM\/AUDM) OR K24 engine wiring harnesses.\u003c\/li\u003e\n\u003cli\u003eThis harnss does work with the Speed Science K Series Engine Harness\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cb\u003eWhat type of connectors and pins do you use?\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003eWhen we construct a Hybrid Racing harness we utilize brand new connectors, terminals, and wire sourced from the same company that Honda utilizes for their connectors. These connectors are ordered in bulk from Japan and ensure that you get all new parts. In addition, all new connectors decrease the chance for errors in the harness as we do not solder any of the joints. Every harness is machine made and human checked so they are issue free.\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eWhat if I have questions or problems?\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003eTo ensure a trouble-free install all of the wires are labeled and neatly packaged. The most valuable thing you get when you purchase a Hybrid Racing harness is full tech support. This tech support extends beyond your harness and includes help with anything associated with your swap. If you have any problems at all with the swap just give Hybrid Racing a call and a tech will get you the information you need. It’s like having a buddy down the street who has already done hundreds of K swaps!\u003c\/p\u003e","brand":"Hybrid Racing","offers":[{"title":"Default Title","offer_id":29175742890083,"sku":"HYB-CWH-01-99","price":468.03,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0253\/8848\/2659\/products\/92161fb863a280ae3b8b94f6f19e1b29_2000x_a98fd74d-8c47-4848-aa10-bf4be5382cea.jpg?v=1580790103"},{"product_id":"hybrid-racing-k-swap-conversion-harness-ek-96-98","title":"Hybrid Racing K-Swap Conversion Harness - EK 96-98","description":"\u003cmeta charset=\"utf-8\"\u003e\n\u003cp\u003eWith over ten years of K-Series swap wiring experience, the Hybrid Racing Conversion Harness is the most widely used and reliable K-Swap conversion harness on the market. This conversion harnesses powers thousands of K-Swaps all over the world!\u003c\/p\u003e\n\u003cp\u003eThe K-Swap harness interfaces with your factory dash harness, your OEM K-Series engine harness and your K-Series ECU allowing for a simple plug and play K-Swap.\u003c\/p\u003e\n\u003cp\u003eThe Hybrid Racing Conversion Harness allows for full functionality of the factory gauge cluster and comes with full replacement warranty. Other companies will have you send in parts of your stock harness wasting time and money in shipping. The Hybrid Racing Conversion Harnesses are in stock and ready to ship. You do not have to send us a core and they are available for overnight shipment.\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eWhat engine harness does the Hybrid Racing conversion harness work with?\u003c\/b\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eThis harness works with all USDM 02-04 and JDM 02-06 wiring harnesses including, K20A, K20A2, K20A3.\u003c\/li\u003e\n\u003cli\u003eThis harness is wired to use the factory wideband O2 sensor so European customers using the UKDM K20A\/K20A2 wiring harness will need to convert the harness to use the narrowband type sensor.\u003c\/li\u003e\n\u003cli\u003eThis harness does NOT work with any USDM 05-06 OR K24 engine wiring harnesses.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cb\u003eWhat type of connectors and pins do you use?\u003c\/b\u003e\u003cspan\u003e\u003c\/span\u003e\u003cspan\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eWhen we construct a Hybrid Racing harness we utilize brand new connectors, terminals and wire sourced from the same company that Honda utilizes for their connectors. These connectors are ordered in bulk from Japan and ensure that you get all new parts. In addition, all new connectors decrease the chance for errors in the harness as we do not solder any of the joints. Every harness is machine made and human checked so they are issue free.\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eWhat if I have questions or problems?\u003c\/b\u003e\u003cspan\u003e\u003c\/span\u003e\u003cspan\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eTo ensure a trouble-free install all of the wires are labeled and neatly packaged. The most valuable thing you get when you purchase a Hybrid Racing harness is full tech support. This tech support extends beyond your harness and includes help with anything associate with your swap. If you have any problems at all with the swap just give us a call and a tech will get you the information you need. It’s like having a buddy down the street who has already done hundreds of K swaps!\u003c\/p\u003e","brand":"Hybrid Racing","offers":[{"title":"Default Title","offer_id":29175938089059,"sku":"HYB-CWH-01-17","price":468.03,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0253\/8848\/2659\/products\/hybrid-racing-k-series-conversion-harness-for-92-95-civic-and-94-01-integra-1.jpg?v=1580790850"},{"product_id":"k-tuned-s2000-dash-converter","title":"K-Tuned S2000 Dash Converter","description":"\n\u003cp\u003eApplications: AP1 and AP2 Cluster Swaps into EF, EG, DC2, EK. May work with other chassis but inputs have not been tested.\u003c\/p\u003e\n\u003cp\u003eThe K-Tuned All-In-One S2000 Dash Converter was designed to take the all the guesswork and headaches out of the very popular S2000 cluster swap. This simple, easy to use and programmable converter, allows the user to make adjustments to 3 separate functions: Speed, Coolant Temp, and Fuel Level. The unit can be used with both the AP1 and AP2 S2000 gauge clusters in just about any chassis.\u003c\/p\u003e\n\u003cp\u003eProgramming is done by connecting the unit via USB to any Windows-based computer or laptop and using a simple downloaded computer application.\u003c\/p\u003e\n\u003cp\u003e1) Speed - Converts speed signal from gear-type and magnetic to the digital signal needed for the S2K Cluster NOTE: Once converted the speed signal remains adjustable a further 25% +\/- for very accurate speed calibration.\u003cbr\u003e 2) Coolant Temp - Converts the dash coolant temp signal to read properly on the S2K cluster. This is preset in the unit but can be adjusted if needed.\u003cbr\u003e 3) Fuel Level - Allows manual adjustment to the fuel gauge on the S2K cluster to match the gas tank on the swap vehicle. Adjustments are made via a small brass dial located on the bottom of the unit.\u003c\/p\u003e\n\u003cp\u003eThe K-Tuned AIO-S2K Converter is wired into the engine harness on the interior of the car right behind the cluster. Wiring is simple, with only 8 wires to connect: power, ground, speed signal input \u0026amp; output, temp sensor input \u0026amp; output, and fuel level input \u0026amp; output. The converter comes complete with a detachable plug-in harness and a separate USB harness which allows the unit to be easily removed from the car and connected to a computer for programming. We also include detailed installation and programming instructions.\u003c\/p\u003e","brand":"K-Tuned","offers":[{"title":"Default Title","offer_id":29176310268003,"sku":"KTD-S2K-CON","price":633.52,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0253\/8848\/2659\/products\/ktd-s2k-con2.jpg?v=1580791882"},{"product_id":"hybrid-racing-ecu-immobiliizer-bypass","title":"Hybrid Racing ECU Immobiliizer Bypass","description":"\u003cp\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003cstrong\u003eHybrid Racing ECU Immobilizer Bypass\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIn the past when doing a K-Swap you either had to purchase a Type R ECU or a Hondata Kpro. Now with the release of the new Immobilizer Removal Unit you can use your bone STOCK 02-04 ECU. Simply connect the 4 wires as outlined in the install guide and your ready to rock.In addition to bypassing the Immobilizer it also disables the multiplex code P0600 so that you can run an error free ecu.\u003c\/p\u003e\n\u003cp\u003eThe unit works with the following ECU's so make sure to double-check the code on the side of your ECU before purchasing:\u003c\/p\u003e\n\u003cp\u003ePLM, PLR, PND, PNF, PRA, PRB, and PPA.\u003c\/p\u003e","brand":"Hybrid Racing","offers":[{"title":"Default Title","offer_id":29176390647907,"sku":"HYB-IMR-01-05","price":531.85,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0253\/8848\/2659\/products\/hybrid-racing-2002-2004-k-series-honda-ecu-immobilizer-delete-chip-0.jpg?v=1580792515"},{"product_id":"hybrid-racing-k-swap-conversion-harness-eg-dc","title":"Hybrid Racing K-Swap Conversion Harness - EG\/DC","description":"\u003cmeta charset=\"utf-8\"\u003e\u003cmeta charset=\"utf-8\"\u003e\n\u003cp\u003eWith over ten years of K-Series swap wiring experience, the Hybrid Racing Conversion Harness is the most widely used and reliable K-Swap conversion harness on the market. This conversion harnesses powers thousands of K-Swaps all over the world!\u003c\/p\u003e\n\u003cp\u003eThe K-Swap harness interfaces with your factory dash harness, your OEM K-Series engine harness and your K-Series ECU allowing for a simple plug and play K-Swap.\u003c\/p\u003e\n\u003cp\u003eThe Hybrid Racing Conversion Harness allows for full functionality of the factory gauge cluster and comes with full replacement warranty. Other companies will have you send in parts of your stock harness wasting time and money in shipping. The Hybrid Racing Conversion Harnesses are in stock and ready to ship. You do not have to send us a core and they are available for overnight shipment.\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eWhat engine harness does the Hybrid Racing conversion harness work with?\u003c\/b\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eThis harness works with all USDM 02-04 and JDM 02-06 wiring harnesses including, K20A, K20A2, K20A3.\u003c\/li\u003e\n\u003cli\u003eThis harness is wired to use the factory wideband O2 sensor so European customers using the UKDM K20A\/K20A2 wiring harness will need to convert the harness to use the narrowband type sensor.\u003c\/li\u003e\n\u003cli\u003eThis harness does NOT work with any USDM 05-06 OR K24 engine wiring harnesses.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cb\u003eWhat type of connectors and pins do you use?\u003c\/b\u003e\u003cspan\u003e\u003c\/span\u003e\u003cspan\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eWhen we construct a Hybrid Racing harness we utilize brand new connectors, terminals and wire sourced from the same company that Honda utilizes for their connectors. These connectors are ordered in bulk from Japan and ensure that you get all new parts. In addition, all new connectors decrease the chance for errors in the harness as we do not solder any of the joints. Every harness is machine made and human checked so they are issue free.\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eWhat if I have questions or problems?\u003c\/b\u003e\u003cspan\u003e\u003c\/span\u003e\u003cspan\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eTo ensure a trouble-free install all of the wires are labeled and neatly packaged. The most valuable thing you get when you purchase a Hybrid Racing harness is full tech support. This tech support extends beyond your harness and includes help with anything associate with your swap. If you have any problems at all with the swap just give us a call and a tech will get you the information you need. It’s like having a buddy down the street who has already done hundreds of K swaps!\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eNote: Not compatible with Carb EG\/DC- order the universal harness  \u003ca href=\"https:\/\/www.speedscience.co.nz\/products\/hybrid-racing-universal-k-swap-wiring-harness?variant=29175742890083\" title=\"Order this universal harness\"\u003ehttps:\/\/www.speedscience.co.nz\/products\/hybrid-racing-universal-k-swap-wiring-harness?variant=29175742890083\u003c\/a\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"Hybrid Racing","offers":[{"title":"Default Title","offer_id":29176406376547,"sku":"HYB-CWH-01-15","price":468.03,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0253\/8848\/2659\/products\/hybrid-racing-k-series-conversion-harness-for-92-95-civic-and-94-01-integra-0_232c15d2-9ff5-42d9-8a20-0c55ccafd961.jpg?v=1580792593"},{"product_id":"k-tuned-k-swap-conversion-harness-honda-eg-dc","title":"K-Tuned K-Swap Conversion Harness - EG\/DC","description":"\n\u003cp\u003eK-Tuned stepped into the wiring market for a reason. To release what they feel is the highest quality and easiest to install conversion harness available. K-Tuned used several of their competitor's harnesses and in short, felt the need to make several improvements based on the flaws they encountered.\u003c\/p\u003e\n\u003cp\u003eA K-swap conversion harness is a must-have part for any K-series engine swap. The harness is required to join up the factory K-series engine harness to the factory dash harness of the swapped car. It is designed integrate the K-series ecu and all of the related electrical functions get them operating properly. Functions like the fuel pump, tach, speedo, starter signal, O2 sensors, etc.\u003c\/p\u003e\n\u003cp\u003eThe K-Tuned harness is 99% plug and play and takes very little time to install. The harness is constructed with quality mil-spec, oem coloured wire and finished with a nice clean looking mil-spec nylon sleeving for protection. The harnesses come complete with installation instructions. The end result is a very high quality conversion harness at the best possible price. Several applications are available so get yours to make sure your K-swap is wired up right!\u003c\/p\u003e","brand":"K-Tuned","offers":[{"title":"Default Title","offer_id":29176482300003,"sku":"KTH-EG-DC2","price":760.24,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0253\/8848\/2659\/products\/eg_2.jpg?v=1580885146"},{"product_id":"rywire-budget-tucked-k-series-engine-harness","title":"Rywire Budget Tucked K-Series Engine Harness","description":"\u003cmeta charset=\"utf-8\"\u003e\u003cspan\u003eVersion 2 of the Rywire K-series engine harness was created to facilitate a more universal chassis, and harness routing preference. This style can be routed more like the OEM k-series engine harness through the center or more to the right on the firewall than it's Version 1 counterpart. This routing method is ideal for our (RHD) Right Hand Drive customers however NOT exclusive to RHD chassis and does work fine on a LHD chassis. Version 2 is also routed in a way that allows you to get around aggressive headers.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eThese harnesses are warrantied and guaranteed to work, we provide excellent installation phone support and troubleshooting to ensure this reputation for quality, however, they are non-refundable. Our Budget K-series Version 2 (K2) wire-tuck engine harness is nearly identical to its K2 Mil-spec counterpart with the primary differences being the type of wire used, the single black wire color and expandable loom used. All connectors and materials are new. Each connector is crimped with pneumatic heads to ensure an OEM crimp every time, then tagged with a white identification label for easy installation. All heavy interference circuits are protected and grounded with proper wire covering. Our engine harnesses are 100% quality tested pin to pin, And resistance checked to ensure no voltage fluctuations. These are the best harnesses money can buy. NO CORE is necessary when buying a harness from us! This harness follows an OEM style configuration meaning that you'll still need an interior ECU adapter for your chassis - see the K-Series ECU Adapter link and add-option below!\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eHARNESS CONNECTOR LIST:\u003c\/strong\u003e\u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003eVTEC solenoid\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eVTC\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eOil pressure sending unit\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eCrank Sensor (CKP)(02-04 K20 style)\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eCoils 1-4\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eCam (CPS) Exhaust Side\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eTop Dead Center sensor (TDC) Intake Side\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eEngine Coolant Temp (ECT) (02-04 K20 style)\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eKnock Sensor (KS)(02-04 K20 style)\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eIntake Air Temperature (IAT)\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eAlternator (02-04 K20 style)\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eManifold Air Pressure (MAP)\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eThrottle Position Sensor (TPS)\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eIdle control motor\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eElectronic speed sensor (VSS)\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eInjectors 1-4\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eh20 sending unit (for gauge cluster)\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eReverse Lights\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eReverse Lockout solenoid\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eStarter signal\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eECU plugs A and B\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003ePower distribution cap\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eGround\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003e2 Extra Wires\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Rywire","offers":[{"title":"Default Title","offer_id":32182161965155,"sku":"K2-BASE","price":1486.71,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0253\/8848\/2659\/products\/K2-Base-2.jpg?v=1582758093"},{"product_id":"speed-science-engine-harness-plug-set-k-series","title":"Speed Science Engine Harness Plug Set - K Series","description":"\u003cp\u003eReplace your cracked or damaged plugs with this complete set.\u003c\/p\u003e\n\u003cp\u003ePerfect if you are doing a k swap and need new plugs for a custom loom or have a loom with damaged plugs\u003c\/p\u003e","brand":"Speed Science","offers":[{"title":"Default Title","offer_id":32434247991395,"sku":"SS-ENG-HARN-PLUGS-K","price":279.0,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0253\/8848\/2659\/products\/IMG_20200706_164630.jpg?v=1594095298"},{"product_id":"hybrid-racing-k-swap-conversion-harness-ek-99-00","title":"Hybrid Racing K-Swap Conversion Harness - EK 99-00","description":"\u003cmeta charset=\"utf-8\"\u003e\u003cmeta charset=\"utf-8\"\u003e\n\u003cp\u003eWith over ten years of K-Series swap wiring experience, the Hybrid Racing Conversion Harness is the most widely used and reliable K-Swap conversion harness on the market. This conversion harnesses powers thousands of K-Swaps all over the world!\u003c\/p\u003e\n\u003cp\u003eThe K-Swap harness interfaces with your factory dash harness, your OEM K-Series engine harness and your K-Series ECU allowing for a simple plug and play K-Swap.\u003c\/p\u003e\n\u003cp\u003eThe Hybrid Racing Conversion Harness allows for full functionality of the factory gauge cluster and comes with full replacement warranty. Other companies will have you send in parts of your stock harness wasting time and money in shipping. The Hybrid Racing Conversion Harnesses are in stock and ready to ship. You do not have to send us a core and they are available for overnight shipment.\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eWhat engine harness does the Hybrid Racing conversion harness work with?\u003c\/b\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eThis harness works with all USDM 02-04 and JDM 02-06 wiring harnesses including, K20A, K20A2, K20A3.\u003c\/li\u003e\n\u003cli\u003eThis harness is wired to use the factory wideband O2 sensor so European customers using the UKDM K20A\/K20A2 wiring harness will need to convert the harness to use the narrowband type sensor.\u003c\/li\u003e\n\u003cli\u003eThis harness does NOT work with any USDM 05-06 OR K24 engine wiring harnesses.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cb\u003eWhat type of connectors and pins do you use?\u003c\/b\u003e\u003cspan\u003e\u003c\/span\u003e\u003cspan\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eWhen we construct a Hybrid Racing harness we utilize brand new connectors, terminals and wire sourced from the same company that Honda utilizes for their connectors. These connectors are ordered in bulk from Japan and ensure that you get all new parts. In addition, all new connectors decrease the chance for errors in the harness as we do not solder any of the joints. Every harness is machine made and human checked so they are issue free.\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eWhat if I have questions or problems?\u003c\/b\u003e\u003cspan\u003e\u003c\/span\u003e\u003cspan\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eTo ensure a trouble-free install all of the wires are labeled and neatly packaged. The most valuable thing you get when you purchase a Hybrid Racing harness is full tech support. This tech support extends beyond your harness and includes help with anything associate with your swap. If you have any problems at all with the swap just give us a call and a tech will get you the information you need. It’s like having a buddy down the street who has already done hundreds of K swaps!\u003c\/p\u003e","brand":"Hybrid Racing","offers":[{"title":"Default Title","offer_id":32456223752291,"sku":"HYB-CWH-01-19","price":468.03,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0253\/8848\/2659\/products\/df6ea24d1cdc0592d4eee0a9eb889a16_2000x_9ac5cc24-daba-4584-86df-17ad50957cfa.jpg?v=1588588704"},{"product_id":"hybrid-racing-k-swap-conversion-harness-ef","title":"Hybrid Racing K-Swap Conversion Harness - EF","description":"\u003cmeta charset=\"utf-8\"\u003e\n\u003cp\u003eWith over ten years of K-Series swap wiring experience, the Hybrid Racing Conversion Harness is the most widely used and reliable K-Swap conversion harness on the market. This conversion harnesses powers thousands of K-Swaps all over the world!\u003c\/p\u003e\n\u003cp\u003eThe K-Swap harness interfaces with your factory dash harness, your OEM K-Series engine harness and your K-Series ECU allowing for a simple plug and play K-Swap.\u003c\/p\u003e\n\u003cp\u003eThe Hybrid Racing Conversion Harness allows for full functionality of the factory gauge cluster and comes with full replacement warranty. Other companies will have you send in parts of your stock harness wasting time and money in shipping. The Hybrid Racing Conversion Harnesses are in stock and ready to ship. You do not have to send us a core and they are available for overnight shipment.\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eWhat engine harness does the Hybrid Racing conversion harness work with?\u003c\/b\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eThis harness works with all USDM 02-04 and JDM 02-06 wiring harnesses including, K20A, K20A2, K20A3.\u003c\/li\u003e\n\u003cli\u003eThis harness is wired to use the factory wideband O2 sensor so European customers using the UKDM K20A\/K20A2 wiring harness will need to convert the harness to use the narrowband type sensor.\u003c\/li\u003e\n\u003cli\u003eThis harness does NOT work with any USDM 05-06 OR K24 engine wiring harnesses.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cb\u003eWhat type of connectors and pins do you use?\u003c\/b\u003e\u003cspan\u003e\u003c\/span\u003e\n\u003cp\u003eWhen we construct a Hybrid Racing harness we utilize brand new connectors, terminals and wire sourced from the same company that Honda utilizes for their connectors. These connectors are ordered in bulk from Japan and ensure that you get all new parts. In addition, all new connectors decrease the chance for errors in the harness as we do not solder any of the joints. Every harness is machine made and human checked so they are issue free.\u003c\/p\u003e\n\u003cb\u003eWhat if I have questions or problems?\u003c\/b\u003e\u003cspan\u003e\u003c\/span\u003e\n\u003cp\u003eTo ensure a trouble-free install all of the wires are labeled and neatly packaged. The most valuable thing you get when you purchase a Hybrid Racing harness is full tech support. This tech support extends beyond your harness and includes help with anything associate with your swap. If you have any problems at all with the swap just give us a call and a tech will get you the information you need. It’s like having a buddy down the street who has already done hundreds of K swaps!\u003c\/p\u003e","brand":"Hybrid Racing","offers":[{"title":"Default Title","offer_id":32456327331939,"sku":"HYB-CWH-01-07","price":468.03,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0253\/8848\/2659\/products\/ff8a525fb6ceeae3ad4647a8e754ac67_2000x_95248555-6c7d-4a15-89d6-becbcefcf54f.jpg?v=1588589261"},{"product_id":"k-tuned-immobilizer-multiplexor-bypass","title":"K-Tuned Immobilizer \/ Multiplexor Bypass","description":"\u003cp\u003eThe K-Tuned Immobilizer \/ Multiplexor Bypass unit is designed to allow the use of a stock K-series ecu in a swap application. This affordable option is very easy to install and disables both the immobilizer and the factory multiplexor system. This is a great alternative to other systems, which cost substantially more money. One more part that is making a K-swap a little more affordable.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eApplications:\u003c\/strong\u003e \u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eWorks with PRB (A01-A12 \u0026amp; 305) \/ PND (A01-A09) \/ PNF \/ PRA \/ PRD \/ PPA\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"K-Tuned","offers":[{"title":"Default Title","offer_id":32496885858403,"sku":"KID-001","price":557.5,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0253\/8848\/2659\/products\/kid-001.jpg?v=1589368968"},{"product_id":"k-tuned-k-swap-race-harness","title":"K-Tuned Universal K-Swap Race Harness","description":"\u003cp\u003eWe stepped into the wiring market for a reason. To release what we feel is the highest quality and easiest to install conversion harness available. We’ve used several of our competitor’s harnesses and in short, we felt the need to make several improvements based on the flaws we encountered. Just like every other K-Tuned product, they don’t leave our hands unless we feel that it is a top quality part that we would use on our own personal cars.\u003c\/p\u003e\n\u003cp\u003eA K-swap conversion harness is a must-have part for any K-series engine swap. The harness is designed for custom applications. The harness includes plugs needed to connect to the engine harness, necessary relays, and labeled flying leads. This saves a lot of time sourcing plugs and figuring out wiring.\u003c\/p\u003e\n\u003cp\u003eLoose wires\u003c\/p\u003e\n\u003cp\u003e12V Constant Power (Fused) - Red\u003c\/p\u003e\n\u003cp\u003e12V Ignition - Yellow\u003c\/p\u003e\n\u003cp\u003eStarter Relay Signal - Black\/White\u003c\/p\u003e\n\u003cp\u003eSpeedometer White\/Green\u003c\/p\u003e\n\u003cp\u003eTachometer - Blue\u003c\/p\u003e\n\u003cp\u003eCheck Engine Light - Green\/Brown\u003c\/p\u003e\n\u003cp\u003eCharge Light - White\/Blue\u003c\/p\u003e\n\u003cp\u003eOil Pressure Light - Yellow\/Red\u003c\/p\u003e\n\u003cp\u003eFan Control - Green\u003c\/p\u003e\n\u003cp\u003eFuel Pump - Green\/Yellow\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eApplications:\u003c\/strong\u003e \u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eCustom setups - Race Applications. \u003c\/li\u003e\n\u003c\/ul\u003e","brand":"K-Tuned","offers":[{"title":"Default Title","offer_id":32496898572387,"sku":"KTH-204-RCE","price":760.24,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0253\/8848\/2659\/products\/KTH-204-RCE_01.jpg?v=1589369122"},{"product_id":"k-tuned-ground-strap-pair","title":"K-Tuned Ground Strap (Pair)","description":"\u003cp\u003eOur ground wire kit includes two 11\" long ground wires. These are great upgrade for old corroded and worn grounds. You want to run one from transmission to chassis and engine to chassis. Both connections should be to bare metal. \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eApplication: \u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eUniversal\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"K-Tuned","offers":[{"title":"Default Title","offer_id":32496912990307,"sku":"KTH-GWP-011","price":55.72,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0253\/8848\/2659\/products\/KTH-GWP-011_20_1.jpg?v=1589369199"},{"product_id":"rywire-d-b-series-budget-tucked-engine-harness-obd2-w-obd1-ecu-plugs","title":"Rywire D\/B Series Budget Tucked Engine Harness OBD2 w' OBD1 ECu Plugs","description":"\u003cmeta charset=\"utf-8\"\u003e\u003cmeta charset=\"utf-8\"\u003e\n\u003cp\u003e\u003cspan\u003eOur Budget D-series and B-series compatible wire-tuck engine harness is nearly identical to our Mil-spec engine harness line with the primary difference being, the single black wire color and expandable loom used. \u003c\/span\u003e\u003cb\u003eThere are quite a few options available. Please look through them carefully to make sure you get the right parts!\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eAll connectors and materials are new. Each connector is crimped with pneumatic heads to ensure an OEM crimp every time, then tagged with a white identification label for easy installation. All heavy interference circuits are protected and grounded with proper wire covering. Our engine harnesses are 100% quality tested pin to pin, And resistance checked to ensure no voltage fluctuations.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003ci\u003e\u003cb\u003eAll Rywire engine harnesses are made with OBD1 (92-95) ECU Connectors.\u003c\/b\u003e\u003c\/i\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eAn ECU adapter must be used for OBD2a or OBD2b ECU's if necessary.\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eOur harness \u003c\/span\u003e\u003ci\u003e\u003cb\u003edoes not support USDM OBD2 ECU's.\u003c\/b\u003e\u003c\/i\u003e\u003cspan\u003e\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eAftermarket ECU's using OBD2 plugs \u0026amp; \u003c\/span\u003e\u003ci\u003e\u003cb\u003eNon-US \u003c\/b\u003e\u003c\/i\u003e\u003cspan\u003eOBD2 ECUs are compatible! (except for H22 and GSR stock computers).\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eEach harness will come with a custom back side sub-harness that will be proprietary to the chassis you choose. This way if you ever change chassis you will only need a new sub-harness, not a whole new wire loom!\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eThese harnesses are warrantied and guaranteed to work, however, they are non-refundable. Because the back-side (interior\/shock tower connection) separates from the main harness, the engine harness can be used on multiple chassis provided the engine itself uses the same components. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e This is engine harness only. Alternator and chassis harness available separately.\u003c\/p\u003e","brand":"Rywire","offers":[{"title":"Default Title","offer_id":32509322002531,"sku":"rywRY-B2-BASE","price":1149.61,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0253\/8848\/2659\/products\/B2-Base-2T.jpg?v=1628134961"},{"product_id":"speedfactory-boost-solenoid-mounting-plate","title":"SpeedFactory ECU Conversion Harnesses","description":"\u003cmeta charset=\"utf-8\"\u003e\n\u003cp\u003eTheSpeedFactory Racing 3-Port Boost Control Solenoid Mounting Bracket kit allows you to securely and professionally mount your SpeedFactory Electronic Boost Control Solenoid in your engine compartment.\u003c\/p\u003e\n\u003cp\u003eEach kit includes: (1) laser-cut 3\/16\" thick mounting bracket, (2) stainless steel hex head machine screws + washers, and easily mounts to your chassis using any M6x1.0 bolt of your choice.\u003c\/p\u003e\n\u003cp\u003eNote: The use of Loctite is strongly recommended on solenoid bracket bolt threads.\u003c\/p\u003e","brand":"SpeedFactory","offers":[{"title":"3 Port","offer_id":32598504276067,"sku":"SF-01-051-B","price":42.42,"currency_code":"NZD","in_stock":true},{"title":"4 port","offer_id":32598504308835,"sku":"SF-01-052-B","price":42.42,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0253\/8848\/2659\/products\/3_port_bracket_s.jpg?v=1632110652"},{"product_id":"chase-bays-raychem-dr-25-engine-ground-kit","title":"Chase Bays Raychem DR-25 Engine Ground Kit","description":"\u003cp\u003eThis product was designed to create a worry free engine ground setup thats extremely durable. It is loomed in Raychem DR-25 Heat Shrink which is by far, the toughest heat shrink available.\u003c\/p\u003e\n\u003cp\u003e(3) 8 gauge welding cable grounds for valve cover to chassis, alternator housing to chassis, and transmission to chassis. (1) 4 gauge welding cable for battery terminal to chassis. Each terminal is crimped and soldered so you could pick your fat uncle up with these! Universal fitment. \u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRecommended grounding points:\u003cbr\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eCylinder head to chassis\u003c\/li\u003e\n\u003cli\u003eTransmission to chassis\u003c\/li\u003e\n\u003cli\u003eAlternator bracket or casing to chassis\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Chase Bays","offers":[{"title":"Default Title","offer_id":32609526677603,"sku":"CB-U-DRGRND","price":180.82,"currency_code":"NZD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0253\/8848\/2659\/products\/Chase_Bays_Engine_Ground_Grounding_Earth_Kit_1.jpg?v=1590730068"},{"product_id":"speed-science-tucked-engine-harness-k-series","title":"Speed Science Tucked Engine Harness - K Series","description":"\u003cp\u003e\u003cspan style=\"color: #ff2a00;\"\u003e\u003cstrong\u003eUses K20 crank sensor (Honda - 37500-PNB-003) and K20 knock sensor (Honda - 30530-PV1-A01), can be swapped with PLM knock\/wire combo (PLM-SN-KNOCK). Alternative Speed Science jumper for K24 crank sensor available -\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #000000;\"\u003eThis harness is an EXACT schematic replica of a JDM DC5 Type R engine harness with 2 slight modifications.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #000000;\"\u003e1 - The alternator plug is now integrated into the engine harness, not part of the charge harness. This makes things much neater and now you just need to run new power cables and you're sussed.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #000000;\"\u003e2 - We have extended the length of the harness at the ECU end to allow for greater flexibility of routing options - this harness will work in both LHD, RHD and RWD applications.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #000000;\"\u003eThese harnesses have been tested on multiple vehicles as part of the R\u0026amp;D process.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #000000;\"\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e Those using with CL7\/9 Trans will still need to switch plugs over for the VSS or purchase ss-rsx-vss-1 jumper harness\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #000000;\"\u003eAlternator wiring has deleted  4th pin for low charging rate. This may trigger a check engine code if you are not running a Kpro. Alternator will charge constant 14.2 volts, same as all other manufactures. \u003c\/span\u003e\u003c\/p\u003e","brand":"Speed Science","offers":[{"title":"Default Title","offer_id":32905568125027,"sku":"SS-HARNESS-K","price":869.0,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0253\/8848\/2659\/products\/DSC_6711.jpg?v=1596672339"},{"product_id":"atp-turbo-e85-ethanol-electrical-connector-and-wire-harness","title":"ATP Turbo E85 Ethanol Electrical Connector and Wire Harness","description":"\u003cp\u003e\u003cb\u003e\u003c\/b\u003e\u003cb\u003e\u003cimg src=\"https:\/\/www.atpturbo.com\/mm5\/graphics\/00000001\/Catalog%20Images\/Sensors\/ATP-SNS-021_B450.jpg\" border=\"0\"\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003e\u003c\/b\u003e\u003cspan\u003eElectrical connector and wire harness for 3 wire E85 Ethanol content sensor.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003eE85 Ethanol content sensor sold separately. Available here: (Product Code: ATP-SNS-020)\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eFeatures\u003c\/b\u003e\u003cbr\u003e\u003cspan\u003e- 3 wire harness\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cb\u003eProduct Contents\u003c\/b\u003e\u003cbr\u003e\u003cspan\u003e- E85 Ethanol Electrical Connector and Wire Harness, 1 unit\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cb\u003eElectrical Plug \u0026amp; Wire Layout\u003c\/b\u003e\u003cbr\u003e\u003cspan\u003e- Out: 0-5V output for ethanol content value\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e- Gnd: Sensor ground\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e- Vcc: 12V sensor power\u003c\/span\u003e\u003c\/p\u003e","brand":"ATP Turbo","offers":[{"title":"Default Title","offer_id":32994155692131,"sku":"ATP-SNS-021","price":39.62,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0253\/8848\/2659\/products\/ATP-SNS-021_A450.jpg?v=1598762411"},{"product_id":"aem-cd-carbon-dash-plug-play-adapter-kit-for-2016-19-polaris-rzr-xp","title":"AEM CD Carbon Dash Plug \u0026 Play Adapter Kit for 2016-19 Polaris RZR XP","description":"\u003cp data-mce-fragment=\"1\"\u003e\u003cspan\u003eAEMnet is the technology that allows multiple AEMnet enabled devices to share information with each other through a single cable. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cspan\u003eAEMnet is an open architecture software and hardware interface based on the CAN 2.0 specification, which provides the ability for multiple enabled devices to easily communicate with each other through a single cable. The hardware connection is made through a Deutsch 4P DTM connector and contains 12 volt switched power and ground (2A max) as well as the CAN data lines. Devices connected to the AEMnet transmit data through this one connection and devices can receive power and ground from this same adapter as well. \u003c\/span\u003e\u003c\/p\u003e","brand":"AEM","offers":[{"title":"Default Title","offer_id":33358201585763,"sku":"aem30-2219","price":210.31,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0253\/8848\/2659\/products\/380240c7-3ee9-4918-a96b-4b8275578381-420.jpg?v=1612504962"},{"product_id":"aem-cd-carbon-plug-play-adapter-kit-for-2016-up-yamaha-yxz","title":"AEM CD Carbon Plug \u0026 Play Adapter Kit for 2016-up Yamaha YXZ","description":"\u003cp data-mce-fragment=\"1\"\u003e\u003cspan\u003eThe CD-5\/CD-7 color digital displays feature a super bright, high contrast, sunlight readable display and include an integrated glare diffuser and shade hood so that they are readable in even the brightest daylight conditions. They are designed to accept channels from CAN bus connections and do not include analog inputs. Two CAN bus channels are included so that it can receive and collect data from AEMnet enabled devices such as the Infinity ECU, Series 2 EMS or EMS-4, and 3rd Party Devices (see Supported Apps Tab), including PDM’s, CAN sensor modules and programmable engine management systems. Third-party systems will require download of 3rd party DBC CAN bus protocol files for proper operation if they are not included in our setup software. We currently have over 150 validated 3rd party applications, and offer a CD-7 Power Cable to simplify the installation of 3rd party devices. We have also developed 3rd Party Plug \u0026amp; Play Adapter Cables for certain applications, which are highlighted on our Supported Apps Tab and can be viewed on our Install Kits Tab. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cspan\u003eSeven ultra-bright LEDs span the top of the display housing for RPM and shift light indication. Users can program them to ascend in specific increments based on RPM range, and flash when it is time to shift. Brightness is user programmable on the fixed color LEDs. Two large buttons are included on the face of the display, allowing easy page changing and memory resetting even with driving gloves on. These button functions are also duplicated on the rear connector allowing the user to mount remote buttons on the steering wheel if desired. Two additional programmable LEDs are located above the toggle buttons on the sides of the housing. \u003c\/span\u003e\u003c\/p\u003e","brand":"AEM","offers":[{"title":"Default Title","offer_id":33358213087331,"sku":"aem30-2220","price":165.07,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0253\/8848\/2659\/products\/30-2220-1-web.jpg?v=1612437420"},{"product_id":"aem-cd-7-power-cable-for-non-aemnet-equipped-devices","title":"AEM CD-7 Power Cable for Non-AEMnet Equipped Devices","description":"\u003cspan data-mce-fragment=\"1\"\u003eAEMnet is the technology that allows multiple AEMnet enabled devices to share information with each other through a single cable. AEMnet is an open architecture software and hardware interface based on the CAN 2.0 specification, which provides the ability for multiple enabled devices to easily communicate with each other through a single cable. The hardware connection is made through a Deutsch 4P DTM connector and contains 12 volt switched power and ground (2A max) as well as the CAN data lines. Devices connected to the AEMnet transmit data through this one connection and devices can receive power and ground from this same adapter as well. \u003c\/span\u003e\u003cbr\u003e\n\u003cul\u003e\u003c\/ul\u003e","brand":"AEM","offers":[{"title":"Default Title","offer_id":33366304456803,"sku":"aem30-2218","price":41.81,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0253\/8848\/2659\/products\/cf5ad003-0eee-48c0-a60f-663b7245d201-800.jpg?v=1610174568"},{"product_id":"aem-cd-7-cd-7l-plug-play-adapter-harness-for-msd-atomic-tbi-efi-systems","title":"AEM CD-7\/CD-7L Plug \u0026 Play Adapter Harness for MSD Atomic TBI EFI Systems","description":"\u003cp\u003e\u003cspan data-mce-fragment=\"1\"\u003eAEMnet is the technology that allows multiple AEMnet enabled devices to share information with each other through a single cable. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan data-mce-fragment=\"1\"\u003eAEMnet is an open architecture software and hardware interface based on the CAN 2.0 specification, which provides the ability for multiple enabled devices to easily communicate with each other through a single cable. The hardware connection is made through a Deutsch 4P DTM connector and contains 12 volt switched power and ground (2A max) as well as the CAN data lines. Devices connected to the AEMnet transmit data through this one connection and devices can receive power and ground from this same adapter as well. \u003c\/span\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\u003c\/ul\u003e","brand":"AEM","offers":[{"title":"Default Title","offer_id":33366320906339,"sku":"aem30-2213","price":115.18,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0253\/8848\/2659\/products\/18e39d41-5888-496b-ab44-929f6c47db28-800.jpg?v=1610174573"},{"product_id":"aem-cd-7-cd-7l-plug-play-adapter-harness-for-holley-efi","title":"AEM CD-7\/CD-7L Plug \u0026 Play Adapter Harness for Holley EFI","description":"\u003cp\u003e\u003cspan data-mce-fragment=\"1\"\u003eAEMnet is the technology that allows multiple AEMnet enabled devices to share information with each other through a single cable.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan data-mce-fragment=\"1\"\u003e AEMnet is an open architecture software and hardware interface based on the CAN 2.0 specification, which provides the ability for multiple enabled devices to easily communicate with each other through a single cable. The hardware connection is made through a Deutsch 4P DTM connector and contains 12 volt switched power and ground (2A max) as well as the CAN data lines. Devices connected to the AEMnet transmit data through this one connection and devices can receive power and ground from this same adapter as well. \u003c\/span\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\u003c\/ul\u003e","brand":"AEM","offers":[{"title":"Default Title","offer_id":33366322643043,"sku":"aem30-2214","price":95.31,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0253\/8848\/2659\/products\/9435da36-842f-4be6-a3de-0e86fb7ead3d-800.jpg?v=1610174577"},{"product_id":"aem-cd-7-vi-pec-link-ecu-p-adapter-harness","title":"AEM CD-7 Vi-Pec\/Link ECU P Adapter Harness","description":"\u003cp\u003e\u003cspan data-mce-fragment=\"1\"\u003eAEMnet is the technology that allows multiple AEMnet enabled devices to share information with each other through a single cable. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan data-mce-fragment=\"1\"\u003eAEMnet is an open architecture software and hardware interface based on the CAN 2.0 specification, which provides the ability for multiple enabled devices to easily communicate with each other through a single cable. The hardware connection is made through a Deutsch 4P DTM connector and contains 12 volt switched power and ground (2A max) as well as the CAN data lines. Devices connected to the AEMnet transmit data through this one connection and devices can receive power and ground from this same adapter as well. \u003c\/span\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\u003c\/ul\u003e","brand":"AEM","offers":[{"title":"Default Title","offer_id":33366322839651,"sku":"aem30-2215","price":146.22,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0253\/8848\/2659\/products\/7304f8ad-2e0d-4e02-b8fd-f233d8e2fc0b-800.jpg?v=1610174581"},{"product_id":"aem-cd-dash-plug-play-adapter-harness-for-obdii-can","title":"AEM CD Dash Plug \u0026 Play Adapter Harness for OBDII CAN","description":"AEMnet is the technology that allows multiple AEMnet enabled devices to share information with each other through a single cable.\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eAEMnet is an open architecture software and hardware interface based on the CAN 2.0 specification, which provides the ability for multiple enabled devices to easily communicate with each other through a single cable. The hardware connection is made through a Deutsch 4P DTM connector and contains 12 volt switched power and ground (2A max) as well as the CAN data lines. Devices connected to the AEMnet transmit data through this one connection and devices can receive power and ground from this same adapter as well.\u003cbr\u003e\n\u003cul\u003e\u003c\/ul\u003e","brand":"AEM","offers":[{"title":"Default Title","offer_id":33366323593315,"sku":"aem30-2217","price":84.99,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0253\/8848\/2659\/products\/3f9a562b-38ed-4227-a35a-32121dc00fb6-800.jpg?v=1610174585"},{"product_id":"aem-aemnet-can-bus-extension-cable-2-ft-length","title":"AEMnet CAN bus Extension Cable, 2 Ft. Length","description":"\u003cp\u003e\u003cspan data-mce-fragment=\"1\"\u003eAEMnet is the technology that allows multiple AEMnet enabled devices to share information with each other through a single cable. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan data-mce-fragment=\"1\"\u003eAEMnet is an open architecture software and hardware interface based on the CAN 2.0 specification, which provides the ability for multiple enabled devices to easily communicate with each other through a single cable. The hardware connection is made through a Deutsch 4P DTM connector and contains 12 volt switched power and ground (2A max) as well as the CAN data lines. Devices connected to the AEMnet transmit data through this one connection and devices can receive power and ground from this same adapter as well. \u003c\/span\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\u003c\/ul\u003e","brand":"AEM","offers":[{"title":"Default Title","offer_id":33367767515235,"sku":"aem30-3606","price":102.16,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0253\/8848\/2659\/products\/30-3608-1-aemnetcable-web.jpg?v=1610084140"},{"product_id":"aem-cd-carbon-dash-display-plug-play-adapter-harness","title":"AEM CD Carbon Dash Display Plug \u0026 Play Adapter Harness","description":"\u003cp data-mce-fragment=\"1\"\u003e\u003cspan\u003eAEM CD-5\/7 Carbon Digital Dash PnP Adapter Harness for Can-Am Maverick X3 \u003c\/span\u003e\u003cbr\u003e\u003c\/p\u003e","brand":"AEM","offers":[{"title":"Default Title","offer_id":33367769808995,"sku":"aem30-2232","price":110.05,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0253\/8848\/2659\/products\/30-2232-3-web.jpg?v=1612435066"},{"product_id":"aem-cd-carbon-serial-to-can-adapter-harness-for-the-aem-series-1","title":"AEM CD Carbon Serial-to-CAN Adapter Harness for the AEM Series 1","description":"\u003cp\u003e\u003cspan data-mce-fragment=\"1\"\u003eThe CD-5\/CD-7 color digital displays feature a super bright, high contrast, sunlight readable display and include an integrated glare diffuser and shade hood so that they are readable in even the brightest daylight conditions. They are designed to accept channels from CAN bus connections and do not include analog inputs. Two CAN bus channels are included so that it can receive and collect data from AEMnet enabled devices such as the Infinity ECU, Series 2 EMS or EMS-4, and 3rd Party Devices (see Supported Apps Tab), including PDM’s, CAN sensor modules and programmable engine management systems. Third-party systems will require download of 3rd party DBC CAN bus protocol files for proper operation if they are not included in our setup software. We currently have over 150 validated 3rd party applications, and offer a CD-7 Power Cable to simplify the installation of 3rd party devices. We have also developed 3rd Party Plug \u0026amp; Play Adapter Cables for certain applications, which are highlighted on our Supported Apps Tab and can be viewed on our Install Kits Tab.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan data-mce-fragment=\"1\"\u003e Seven ultra-bright LEDs span the top of the display housing for RPM and shift light indication. Users can program them to ascend in specific increments based on RPM range, and flash when it is time to shift. Brightness is user programmable on the fixed color LEDs. Two large buttons are included on the face of the display, allowing easy page changing and memory resetting even with driving gloves on. These button functions are also duplicated on the rear connector allowing the user to mount remote buttons on the steering wheel if desired. Two additional programmable LEDs are located above the toggle buttons on the sides of the housing. \u003c\/span\u003e\u003c\/p\u003e","brand":"AEM","offers":[{"title":"Default Title","offer_id":33367774363747,"sku":"aem30-2228","price":274.93,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0253\/8848\/2659\/products\/30-2231-motec-late-s2c-wrapped-web.jpg?v=1610084258"},{"product_id":"aem-cd-carbon-serial-to-can-adapter-harness-for-the-early-motec-m4s","title":"AEM CD Carbon Serial-to-CAN Adapter Harness for the early MoTeC M4s","description":"The CD-5\/CD-7 color digital displays feature a super bright, high contrast, sunlight readable display and include an integrated glare diffuser and shade hood so that they are readable in even the brightest daylight conditions. They are designed to accept channels from CAN bus connections and do not include analog inputs. Two CAN bus channels are included so that it can receive and collect data from AEMnet enabled devices such as the Infinity ECU, Series 2 EMS or EMS-4, and 3rd Party Devices (see Supported Apps Tab), including PDM’s, CAN sensor modules and programmable engine management systems. Third-party systems will require download of 3rd party DBC CAN bus protocol files for proper operation if they are not included in our setup software. We currently have over 150 validated 3rd party applications, and offer a CD-7 Power Cable to simplify the installation of 3rd party devices. We have also developed 3rd Party Plug \u0026amp; Play Adapter Cables for certain applications, which are highlighted on our Supported Apps Tab and can be viewed on our Install Kits Tab.\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eSeven ultra-bright LEDs span the top of the display housing for RPM and shift light indication. Users can program them to ascend in specific increments based on RPM range, and flash when it is time to shift. Brightness is user programmable on the fixed color LEDs. Two large buttons are included on the face of the display, allowing easy page changing and memory resetting even with driving gloves on. These button functions are also duplicated on the rear connector allowing the user to mount remote buttons on the steering wheel if desired. Two additional programmable LEDs are located above the toggle buttons on the sides of the housing.","brand":"AEM","offers":[{"title":"Default Title","offer_id":33367774560355,"sku":"aem30-2230","price":274.93,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0253\/8848\/2659\/products\/30-2231-motec-late-s2c-wrapped-web_165b6086-4111-45ef-a636-f31f27b818a7.jpg?v=1610084265"},{"product_id":"aem-cd-carbon-serial-to-can-adapter-harness-for-the-later-motec-m4s","title":"AEM CD Carbon Serial-to-CAN Adapter Harness for the later MoTeC M4s","description":"The CD-5\/CD-7 color digital displays feature a super bright, high contrast, sunlight readable display and include an integrated glare diffuser and shade hood so that they are readable in even the brightest daylight conditions. They are designed to accept channels from CAN bus connections and do not include analog inputs. Two CAN bus channels are included so that it can receive and collect data from AEMnet enabled devices such as the Infinity ECU, Series 2 EMS or EMS-4, and 3rd Party Devices (see Supported Apps Tab), including PDM’s, CAN sensor modules and programmable engine management systems. Third-party systems will require download of 3rd party DBC CAN bus protocol files for proper operation if they are not included in our setup software. We currently have over 150 validated 3rd party applications, and offer a CD-7 Power Cable to simplify the installation of 3rd party devices. We have also developed 3rd Party Plug \u0026amp; Play Adapter Cables for certain applications, which are highlighted on our Supported Apps Tab and can be viewed on our Install Kits Tab.\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eSeven ultra-bright LEDs span the top of the display housing for RPM and shift light indication. Users can program them to ascend in specific increments based on RPM range, and flash when it is time to shift. Brightness is user programmable on the fixed color LEDs. Two large buttons are included on the face of the display, allowing easy page changing and memory resetting even with driving gloves on. These button functions are also duplicated on the rear connector allowing the user to mount remote buttons on the steering wheel if desired. Two additional programmable LEDs are located above the toggle buttons on the sides of the housing.","brand":"AEM","offers":[{"title":"Default Title","offer_id":33367775707235,"sku":"aem30-2231","price":274.93,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0253\/8848\/2659\/products\/30-2231-motec-late-s2c-wrapped-web_3f27a44b-2fe3-4211-8aa5-e6ca0eb12b08.jpg?v=1610084271"},{"product_id":"aem-12v-aemnet-power-cable","title":"AEM 12V AEMnet Power Cable","description":"\u003cp data-mce-fragment=\"1\"\u003eAEM offers several sensor and Plug \u0026amp; Pin connector kits for vehicles that require additional outputs and\/or upgraded hardware over existing sensors. Available sensors include boost\/backpressure sensors, exhaust gas temperature (EGT) sensors, nitrous oxide\/brake pressure sensors, UEGO replacement sensors, inlet air temp sensors (IAT), K-Type sensors and more. All sensors come with a three- wire mating connector with 12\" leads for ease of installation.\u003cbr\u003e\u003cbr\u003e \u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eHigh-quality sealed sensor housings\u003c\/li\u003e\n\u003cli\u003eMating connector and 12” leads included (sensors)\u003c\/li\u003e\n\u003cli\u003eAccurate and affordable!\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\u003c\/ul\u003e","brand":"AEM Intakes","offers":[{"title":"Default Title","offer_id":33367782359139,"sku":"aem30-2227","price":65.5,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0253\/8848\/2659\/products\/30-2227-1-web.jpg?v=1610084383"},{"product_id":"aem-replacement-wiring-harness-for-cd-carbon-digital-dashes","title":"AEM Replacement Wiring Harness for CD Carbon Digital Dashes","description":"\u003cp\u003e\u003cspan data-mce-fragment=\"1\"\u003eThe CD-5\/CD-7 color digital displays feature a super bright, high contrast, sunlight readable display and include an integrated glare diffuser and shade hood so that they are readable in even the brightest daylight conditions. They are designed to accept channels from CAN bus connections and do not include analog inputs. Two CAN bus channels are included so that it can receive and collect data from AEMnet enabled devices such as the Infinity ECU, Series 2 EMS or EMS-4, and 3rd Party Devices (see Supported Apps Tab), including PDM’s, CAN sensor modules and programmable engine management systems. Third-party systems will require download of 3rd party DBC CAN bus protocol files for proper operation if they are not included in our setup software. We currently have over 150 validated 3rd party applications, and offer a CD-7 Power Cable to simplify the installation of 3rd party devices. We have also developed 3rd Party Plug \u0026amp; Play Adapter Cables for certain applications, which are highlighted on our Supported Apps Tab and can be viewed on our Install Kits Tab. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan data-mce-fragment=\"1\"\u003eSeven ultra-bright LEDs span the top of the display housing for RPM and shift light indication. Users can program them to ascend in specific increments based on RPM range, and flash when it is time to shift. Brightness is user programmable on the fixed color LEDs. Two large buttons are included on the face of the display, allowing easy page changing and memory resetting even with driving gloves on. These button functions are also duplicated on the rear connector allowing the user to mount remote buttons on the steering wheel if desired. Two additional programmable LEDs are located above the toggle buttons on the sides of the housing. \u003c\/span\u003e\u003c\/p\u003e","brand":"AEM","offers":[{"title":"Default Title","offer_id":33367791206499,"sku":"aem30-5563","price":82.48,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0253\/8848\/2659\/products\/8d9a7725-8296-4845-98a0-cf1535686768-420.jpg?v=1612505157"},{"product_id":"aem-infinity-708-710-712-30-7101-30-7100-30-7111-plug-play-coyote-engine-harness-adapter","title":"AEM Infinity Plug \u0026 Play Coyote Engine Harness Adapter","description":"\u003cp\u003e\u003cspan data-mce-fragment=\"1\"\u003eThe Infinity Plug \u0026amp; Play programmable ECU includes an application-specific start-up calibration and connects via a Plug \u0026amp; Play harness that is sold separately (PN 30-3500). Begin by determining which Infinity ECU will best support the ancillary components.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eComplete Stand Alone Engine Control\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan data-mce-fragment=\"1\"\u003eThe Infinity ECU combines with the Plug \u0026amp; Play harness to replace the factory ECU and control all of the engine functions. For some vehicles, an AEM MAP sensor (sold separately) is required for proper operation of the Infinity ECU on this application.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePlug \u0026amp; Play Harness with Expansion Port\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan data-mce-fragment=\"1\"\u003e AEM’s sealed, weatherproof Plug \u0026amp; Play harness (sold separately) includes dual Lambda connectors, an AEMnet connector for communication with other AEMnet enabled devices and an auxiliary connector with a Deutsch DTM 12P connector for adding common aftermarket sensors including fuel pressure, air inlet temperature, MAP, boost control solenoid and ethanol content. The expansion port also includes a sensor ground, 5v reference, power from relay and high side output for activating a solenoid, and switched inputs for auxiliary radiator fan, boost target and no-lift shift. \u003c\/span\u003e\u003c\/p\u003e","brand":"AEM","offers":[{"title":"Default Title","offer_id":33371753775203,"sku":"aem30-3813","price":2735.08,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0253\/8848\/2659\/products\/f3d65285-535e-4737-bbfe-c375b7573672-800.jpg?v=1610175778"},{"product_id":"aem-infinity-708-710-712-30-7101-30-7100-30-7111-plug-play-jumper-harness","title":"AEM Infinity Plug \u0026 Play Jumper Harness","description":"The Infinity Plug \u0026amp; Play programmable ECU includes an application-specific start-up calibration and connects via a Plug \u0026amp; Play harness that is sold separately (PN 30-3500). Begin by determining which Infinity ECU will best support the ancillary components.\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cstrong\u003eComplete Stand Alone Engine Control\u003c\/strong\u003e\u003cbr data-mce-fragment=\"1\"\u003eThe Infinity ECU combines with the Plug \u0026amp; Play harness to replace the factory ECU and control all of the engine functions. For some vehicles, an AEM MAP sensor (sold separately) is required for proper operation of the Infinity ECU on this application.\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cstrong\u003ePlug \u0026amp; Play Harness with Expansion Port\u003c\/strong\u003e\u003cbr data-mce-fragment=\"1\"\u003eAEM’s sealed, weatherproof Plug \u0026amp; Play harness (sold separately) includes dual Lambda connectors, an AEMnet connector for communication with other AEMnet enabled devices and an auxiliary connector with a Deutsch DTM 12P connector for adding common aftermarket sensors including fuel pressure, air inlet temperature, MAP, boost control solenoid and ethanol content. The expansion port also includes a sensor ground, 5v reference, power from relay and high side output for activating a solenoid, and switched inputs for auxiliary radiator fan, boost target and no-lift shift.","brand":"AEM","offers":[{"title":"Default Title","offer_id":33371755282531,"sku":"aem30-3812","price":686.59,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0253\/8848\/2659\/products\/267d1f4b-10c8-4828-ae21-e8a017ba2e92-800.jpg?v=1610175782"},{"product_id":"aem-infinity-layover-harness-gm-ls-engines-24x","title":"AEM Infinity Layover Harness: GM LS Engines 24x","description":"The Infinity Plug \u0026amp; Play programmable ECU includes an application-specific start-up calibration and connects via a Plug \u0026amp; Play harness that is sold separately (PN 30-3500). Begin by determining which Infinity ECU will best support the ancillary components.\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cstrong\u003eComplete Stand Alone Engine Control\u003c\/strong\u003e\u003cbr data-mce-fragment=\"1\"\u003eThe Infinity ECU combines with the Plug \u0026amp; Play harness to replace the factory ECU and control all of the engine functions. For some vehicles, an AEM MAP sensor (sold separately) is required for proper operation of the Infinity ECU on this application.\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cstrong\u003ePlug \u0026amp; Play Harness with Expansion Port\u003c\/strong\u003e\u003cbr data-mce-fragment=\"1\"\u003eAEM’s sealed, weatherproof Plug \u0026amp; Play harness (sold separately) includes dual Lambda connectors, an AEMnet connector for communication with other AEMnet enabled devices and an auxiliary connector with a Deutsch DTM 12P connector for adding common aftermarket sensors including fuel pressure, air inlet temperature, MAP, boost control solenoid and ethanol content. The expansion port also includes a sensor ground, 5v reference, power from relay and high side output for activating a solenoid, and switched inputs for auxiliary radiator fan, boost target and no-lift shift.","brand":"AEM","offers":[{"title":"Default Title","offer_id":33371756298339,"sku":"aem30-3532","price":1908.06,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0253\/8848\/2659\/products\/1ca09cbd-41ac-4f73-bdb1-f14d890855c0-800.jpg?v=1610175786"},{"product_id":"aem-infinity-508-30-7108-plug-play-engine-harness","title":"AEM Infinity Plug \u0026 Play Engine Harness","description":"The Infinity Plug \u0026amp; Play programmable ECU includes an application-specific start-up calibration and connects via a Plug \u0026amp; Play harness that is sold separately (PN 30-3500). Begin by determining which Infinity ECU will best support the ancillary components.\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cstrong\u003eComplete Stand Alone Engine Control\u003c\/strong\u003e\u003cbr data-mce-fragment=\"1\"\u003eThe Infinity ECU combines with the Plug \u0026amp; Play harness to replace the factory ECU and control all of the engine functions. For some vehicles, an AEM MAP sensor (sold separately) is required for proper operation of the Infinity ECU on this application.\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cstrong\u003ePlug \u0026amp; Play Harness with Expansion Port\u003c\/strong\u003e\u003cbr data-mce-fragment=\"1\"\u003eAEM’s sealed, weatherproof Plug \u0026amp; Play harness (sold separately) includes dual Lambda connectors, an AEMnet connector for communication with other AEMnet enabled devices and an auxiliary connector with a Deutsch DTM 12P connector for adding common aftermarket sensors including fuel pressure, air inlet temperature, MAP, boost control solenoid and ethanol content. The expansion port also includes a sensor ground, 5v reference, power from relay and high side output for activating a solenoid, and switched inputs for auxiliary radiator fan, boost target and no-lift shift.","brand":"AEM","offers":[{"title":"Default Title","offer_id":33371759771747,"sku":"aem30-3801","price":1675.69,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0253\/8848\/2659\/products\/440b8cb7-abd8-4602-8a16-06330936b92f-800.jpg?v=1610175804"},{"product_id":"aem-infinity-6-8h-plug-play-jumper-harness-2001-2005-honda-k-series-engines","title":"AEM Infinity-6\/8h Plug \u0026 Play Jumper Harness 2001-2005 Honda K-Series Engines","description":"The Infinity Plug \u0026amp; Play programmable ECU includes an application-specific start-up calibration and connects via a Plug \u0026amp; Play harness that is sold separately (PN 30-3500). Begin by determining which Infinity ECU will best support the ancillary components.\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cstrong\u003eComplete Stand Alone Engine Control\u003c\/strong\u003e\u003cbr data-mce-fragment=\"1\"\u003eThe Infinity ECU combines with the Plug \u0026amp; Play harness to replace the factory ECU and control all of the engine functions. For some vehicles, an AEM MAP sensor (sold separately) is required for proper operation of the Infinity ECU on this application.\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cstrong\u003ePlug \u0026amp; Play Harness with Expansion Port\u003c\/strong\u003e\u003cbr data-mce-fragment=\"1\"\u003eAEM’s sealed, weatherproof Plug \u0026amp; Play harness (sold separately) includes dual Lambda connectors, an AEMnet connector for communication with other AEMnet enabled devices and an auxiliary connector with a Deutsch DTM 12P connector for adding common aftermarket sensors including fuel pressure, air inlet temperature, MAP, boost control solenoid and ethanol content. The expansion port also includes a sensor ground, 5v reference, power from relay and high side output for activating a solenoid, and switched inputs for auxiliary radiator fan, boost target and no-lift shift.","brand":"AEM","offers":[{"title":"Default Title","offer_id":33371775336547,"sku":"aem30-3502","price":698.12,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0253\/8848\/2659\/products\/2b12e997-d53f-427e-8e7c-b7fd0506130f-800_d388ce3c-008a-4206-a4ae-d8f2659a6651.jpg?v=1610175834"},{"product_id":"aem-infinity-6-8h-plug-play-jumper-harness-2000-2005-honda-s2000","title":"AEM Infinity-6\/8h Plug \u0026 Play Jumper Harness 2000-2005 Honda S2000","description":"The Infinity Plug \u0026amp; Play programmable ECU includes an application-specific start-up calibration and connects via a Plug \u0026amp; Play harness that is sold separately (PN 30-3500). Begin by determining which Infinity ECU will best support the ancillary components.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eComplete Stand Alone Engine Control\u003c\/strong\u003e\u003cbr\u003eThe Infinity ECU combines with the Plug \u0026amp; Play harness to replace the factory ECU and control all of the engine functions. For some vehicles, an AEM MAP sensor (sold separately) is required for proper operation of the Infinity ECU on this application.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003ePlug \u0026amp; Play Harness with Expansion Port\u003c\/strong\u003e\u003cbr\u003eAEM’s sealed, weatherproof Plug \u0026amp; Play harness (sold separately) includes dual Lambda connectors, an AEMnet connector for communication with other AEMnet enabled devices and an auxiliary connector with a Deutsch DTM 12P connector for adding common aftermarket sensors including fuel pressure, air inlet temperature, MAP, boost control solenoid and ethanol content. The expansion port also includes a sensor ground, 5v reference, power from relay and high side output for activating a solenoid, and switched inputs for auxiliary radiator fan, boost target and no-lift shift.","brand":"AEM","offers":[{"title":"Default Title","offer_id":33371776122979,"sku":"aem30-3508","price":893.64,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0253\/8848\/2659\/products\/2b12e997-d53f-427e-8e7c-b7fd0506130f-800_61f44372-9bc6-4df9-bd3e-382fac549db3.jpg?v=1610175838"},{"product_id":"aem-infinity-plug-play-jumper-harness-mitsubishi-2003-2005-lancer-evolution-viii-mr-rs","title":"AEM Infinity Plug \u0026 Play Jumper Harness Mitsubishi 2003-2005 Lancer Evolution VIII MR\/RS","description":"The Infinity Plug \u0026amp; Play programmable ECU includes an application-specific start-up calibration and connects via a Plug \u0026amp; Play harness that is sold separately (PN 30-3500). Begin by determining which Infinity ECU will best support the ancillary components.\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cstrong\u003eComplete Stand Alone Engine Control\u003c\/strong\u003e\u003cbr data-mce-fragment=\"1\"\u003eThe Infinity ECU combines with the Plug \u0026amp; Play harness to replace the factory ECU and control all of the engine functions. For some vehicles, an AEM MAP sensor (sold separately) is required for proper operation of the Infinity ECU on this application.\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cstrong\u003ePlug \u0026amp; Play Harness with Expansion Port\u003c\/strong\u003e\u003cbr data-mce-fragment=\"1\"\u003eAEM’s sealed, weatherproof Plug \u0026amp; Play harness (sold separately) includes dual Lambda connectors, an AEMnet connector for communication with other AEMnet enabled devices and an auxiliary connector with a Deutsch DTM 12P connector for adding common aftermarket sensors including fuel pressure, air inlet temperature, MAP, boost control solenoid and ethanol content. The expansion port also includes a sensor ground, 5v reference, power from relay and high side output for activating a solenoid, and switched inputs for auxiliary radiator fan, boost target and no-lift shift.","brand":"AEM","offers":[{"title":"Default Title","offer_id":33371785461859,"sku":"aem30-3511","price":628.08,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0253\/8848\/2659\/products\/2b12e997-d53f-427e-8e7c-b7fd0506130f-800_2164221a-406e-41ea-b914-a8df35a11925.jpg?v=1610175853"},{"product_id":"aem-infinity-plug-play-jumper-harness-nissan-1994-1996-silvia-sr20det","title":"AEM Infinity Plug \u0026 Play Jumper Harness Nissan 1994-1996 Silvia SR20DET","description":"The Infinity Plug \u0026amp; Play programmable ECU includes an application-specific start-up calibration and connects via a Plug \u0026amp; Play harness that is sold separately (PN 30-3500). Begin by determining which Infinity ECU will best support the ancillary components.\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cstrong\u003eComplete Stand Alone Engine Control\u003c\/strong\u003e\u003cbr data-mce-fragment=\"1\"\u003eThe Infinity ECU combines with the Plug \u0026amp; Play harness to replace the factory ECU and control all of the engine functions. For some vehicles, an AEM MAP sensor (sold separately) is required for proper operation of the Infinity ECU on this application.\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cstrong\u003ePlug \u0026amp; Play Harness with Expansion Port\u003c\/strong\u003e\u003cbr data-mce-fragment=\"1\"\u003eAEM’s sealed, weatherproof Plug \u0026amp; Play harness (sold separately) includes dual Lambda connectors, an AEMnet connector for communication with other AEMnet enabled devices and an auxiliary connector with a Deutsch DTM 12P connector for adding common aftermarket sensors including fuel pressure, air inlet temperature, MAP, boost control solenoid and ethanol content. The expansion port also includes a sensor ground, 5v reference, power from relay and high side output for activating a solenoid, and switched inputs for auxiliary radiator fan, boost target and no-lift shift.","brand":"AEM","offers":[{"title":"Default Title","offer_id":33371790082147,"sku":"aem30-3517","price":1344.87,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0253\/8848\/2659\/products\/2b12e997-d53f-427e-8e7c-b7fd0506130f-800_6501c87c-0a54-453b-9da5-95046faa6877.jpg?v=1610175863"},{"product_id":"aem-infinity-plug-play-jumper-harness-nissan-1989-1998-skyline-gt-r-rb26dett","title":"AEM Infinity Plug \u0026 Play Jumper Harness Nissan 1989-1998 Skyline GT-R RB26DETT","description":"The Infinity Plug \u0026amp; Play programmable ECU includes an application-specific start-up calibration and connects via a Plug \u0026amp; Play harness that is sold separately (PN 30-3500). Begin by determining which Infinity ECU will best support the ancillary components.\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cstrong\u003eComplete Stand Alone Engine Control\u003c\/strong\u003e\u003cbr data-mce-fragment=\"1\"\u003eThe Infinity ECU combines with the Plug \u0026amp; Play harness to replace the factory ECU and control all of the engine functions. For some vehicles, an AEM MAP sensor (sold separately) is required for proper operation of the Infinity ECU on this application.\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cstrong\u003ePlug \u0026amp; Play Harness with Expansion Port\u003c\/strong\u003e\u003cbr data-mce-fragment=\"1\"\u003eAEM’s sealed, weatherproof Plug \u0026amp; Play harness (sold separately) includes dual Lambda connectors, an AEMnet connector for communication with other AEMnet enabled devices and an auxiliary connector with a Deutsch DTM 12P connector for adding common aftermarket sensors including fuel pressure, air inlet temperature, MAP, boost control solenoid and ethanol content. The expansion port also includes a sensor ground, 5v reference, power from relay and high side output for activating a solenoid, and switched inputs for auxiliary radiator fan, boost target and no-lift shift.","brand":"AEM","offers":[{"title":"Default Title","offer_id":33371796996195,"sku":"aem30-3515","price":1344.87,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0253\/8848\/2659\/products\/c18a8559-ddc3-4929-a408-a305b21da963-800.jpg?v=1610175871"},{"product_id":"aem-plug-play-adapter-harnesses-for-the-2016-polaris-rzr-xp-turbo","title":"AEM Plug \u0026 Play Adapter Harnesses for the 2016 Polaris RZR XP Turbo","description":"The Infinity Plug \u0026amp; Play programmable ECU includes an application-specific start-up calibration and connects via a Plug \u0026amp; Play harness that is sold separately (PN 30-3500). Begin by determining which Infinity ECU will best support the ancillary components.\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cstrong\u003eComplete Stand Alone Engine Control\u003c\/strong\u003e\u003cbr data-mce-fragment=\"1\"\u003eThe Infinity ECU combines with the Plug \u0026amp; Play harness to replace the factory ECU and control all of the engine functions. For some vehicles, an AEM MAP sensor (sold separately) is required for proper operation of the Infinity ECU on this application.\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cstrong\u003ePlug \u0026amp; Play Harness with Expansion Port\u003c\/strong\u003e\u003cbr data-mce-fragment=\"1\"\u003eAEM’s sealed, weatherproof Plug \u0026amp; Play harness (sold separately) includes dual Lambda connectors, an AEMnet connector for communication with other AEMnet enabled devices and an auxiliary connector with a Deutsch DTM 12P connector for adding common aftermarket sensors including fuel pressure, air inlet temperature, MAP, boost control solenoid and ethanol content. The expansion port also includes a sensor ground, 5v reference, power from relay and high side output for activating a solenoid, and switched inputs for auxiliary radiator fan, boost target and no-lift shift.","brand":"AEM","offers":[{"title":"Default Title","offer_id":33371813281891,"sku":"aem30-3822","price":2233.48,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0253\/8848\/2659\/products\/2b12e997-d53f-427e-8e7c-b7fd0506130f-800_633ee9d1-b6f4-4a6d-91c6-33c6b5603f59.jpg?v=1610175880"},{"product_id":"aem-infinity-plug-play-jumper-harness-porsche-2001-2005","title":"AEM Infinity Plug \u0026 Play Jumper Harness Porsche 2001-2005","description":"The Infinity Plug \u0026amp; Play programmable ECU includes an application-specific start-up calibration and connects via a Plug \u0026amp; Play harness that is sold separately (PN 30-3500). Begin by determining which Infinity ECU will best support the ancillary components.\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cstrong\u003eComplete Stand Alone Engine Control\u003c\/strong\u003e\u003cbr data-mce-fragment=\"1\"\u003eThe Infinity ECU combines with the Plug \u0026amp; Play harness to replace the factory ECU and control all of the engine functions. For some vehicles, an AEM MAP sensor (sold separately) is required for proper operation of the Infinity ECU on this application.\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cstrong\u003ePlug \u0026amp; Play Harness with Expansion Port\u003c\/strong\u003e\u003cbr data-mce-fragment=\"1\"\u003eAEM’s sealed, weatherproof Plug \u0026amp; Play harness (sold separately) includes dual Lambda connectors, an AEMnet connector for communication with other AEMnet enabled devices and an auxiliary connector with a Deutsch DTM 12P connector for adding common aftermarket sensors including fuel pressure, air inlet temperature, MAP, boost control solenoid and ethanol content. The expansion port also includes a sensor ground, 5v reference, power from relay and high side output for activating a solenoid, and switched inputs for auxiliary radiator fan, boost target and no-lift shift.","brand":"AEM","offers":[{"title":"Default Title","offer_id":33371813347427,"sku":"aem30-3902","price":3901.37,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0253\/8848\/2659\/products\/2b12e997-d53f-427e-8e7c-b7fd0506130f-800_f6064725-fe48-4c35-8ae8-2c47e3ddeee8.jpg?v=1610175884"},{"product_id":"aem-infinity-plug-play-jumper-harness-suzuki-2002-2007","title":"AEM Infinity Plug \u0026 Play Jumper Harness Suzuki 2002-2007","description":"The Infinity Plug \u0026amp; Play programmable ECU includes an application-specific start-up calibration and connects via a Plug \u0026amp; Play harness that is sold separately (PN 30-3500). Begin by determining which Infinity ECU will best support the ancillary components.\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cstrong\u003eComplete Stand Alone Engine Control\u003c\/strong\u003e\u003cbr data-mce-fragment=\"1\"\u003eThe Infinity ECU combines with the Plug \u0026amp; Play harness to replace the factory ECU and control all of the engine functions. For some vehicles, an AEM MAP sensor (sold separately) is required for proper operation of the Infinity ECU on this application.\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cstrong\u003ePlug \u0026amp; Play Harness with Expansion Port\u003c\/strong\u003e\u003cbr data-mce-fragment=\"1\"\u003eAEM’s sealed, weatherproof Plug \u0026amp; Play harness (sold separately) includes dual Lambda connectors, an AEMnet connector for communication with other AEMnet enabled devices and an auxiliary connector with a Deutsch DTM 12P connector for adding common aftermarket sensors including fuel pressure, air inlet temperature, MAP, boost control solenoid and ethanol content. The expansion port also includes a sensor ground, 5v reference, power from relay and high side output for activating a solenoid, and switched inputs for auxiliary radiator fan, boost target and no-lift shift.","brand":"AEM","offers":[{"title":"Default Title","offer_id":33371817771107,"sku":"aem30-3550","price":547.61,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0253\/8848\/2659\/products\/2b12e997-d53f-427e-8e7c-b7fd0506130f-800_559ebbef-acbc-451f-9601-fab220c13023.jpg?v=1610259774"},{"product_id":"aem-infinity-series-5-plug-play-adapter-harness-for-1993-98-mkiv-toyota-supra-2jzgte-m-t","title":"AEM Infinity Series 5 Plug \u0026 Play Adapter Harness for 1993-’98 MKIV Toyota Supra 2JZGTE M\/T","description":"The Infinity Plug \u0026amp; Play programmable ECU includes an application-specific start-up calibration and connects via a Plug \u0026amp; Play harness that is sold separately (PN 30-3500). Begin by determining which Infinity ECU will best support the ancillary components.\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cstrong\u003eComplete Stand Alone Engine Control\u003c\/strong\u003e\u003cbr data-mce-fragment=\"1\"\u003eThe Infinity ECU combines with the Plug \u0026amp; Play harness to replace the factory ECU and control all of the engine functions. For some vehicles, an AEM MAP sensor (sold separately) is required for proper operation of the Infinity ECU on this application.\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cstrong\u003ePlug \u0026amp; Play Harness with Expansion Port\u003c\/strong\u003e\u003cbr data-mce-fragment=\"1\"\u003eAEM’s sealed, weatherproof Plug \u0026amp; Play harness (sold separately) includes dual Lambda connectors, an AEMnet connector for communication with other AEMnet enabled devices and an auxiliary connector with a Deutsch DTM 12P connector for adding common aftermarket sensors including fuel pressure, air inlet temperature, MAP, boost control solenoid and ethanol content. The expansion port also includes a sensor ground, 5v reference, power from relay and high side output for activating a solenoid, and switched inputs for auxiliary radiator fan, boost target and no-lift shift.","brand":"AEM","offers":[{"title":"Default Title","offer_id":33371820523619,"sku":"aem30-3519","price":1492.17,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0253\/8848\/2659\/products\/2b12e997-d53f-427e-8e7c-b7fd0506130f-800_6ae3344b-9d78-4e20-8d06-e598f6bece8b.jpg?v=1610259793"}],"url":"https:\/\/www.speedscience.co.nz\/collections\/wiring-conversion-harnesses.oembed?page=2","provider":"Speed Science","version":"1.0","type":"link"}